1. הקדמה
The SRNE SYP 5K-S is a 48V hybrid solar inverter designed for off-grid applications, offering a 5KW capacity with a 100A MPPT solar charge controller. This inverter supports both Lithium and Lead-Acid battery types and can be configured for parallel operation with up to 6 units. It features advanced MPPT technology for high efficiency, robust safety measures, and a user-friendly design, making it suitable for various scenarios including residential homes, farms, telecommunication sites, and remote locations.
2. זיכערקייַט אינפֿאָרמאַציע
⚠ ווארענונג: דער פּראָדוקט קענען ויסשטעלן איר צו קעמיקאַלז אַרייַנגערעכנט בלייַ, וואָס איז באַוווסט צו די שטאַט פון קאַליפאָרניאַ צו פאַרשאַפן ראַק און געבורט חסרונות אָדער אנדערע רעפּראָדוקטיווע שאָדן. פֿאַר מער אינפֿאָרמאַציע גיין צו www.P65Warnings.ca.gov.
Always follow local electrical codes and safety regulations during installation and operation. Ensure proper grounding and ventilation. Only qualified personnel should perform installation and maintenance.
3. פּראָדוקט איבערview & איינריכטונגען
The SRNE SYP 5K-S inverter is designed for high performance and reliability in solar energy systems. Key features include:
- עפעקטיווקייַט: Advanced MPPT technology with up to 99.9% efficiency.
- פּוו אַרייַנשרייַב: Up to 22A PV input current, suitable for high power PV modules.
- זיכערקייַט: Comprehensive 360-degree security from hardware to software, including IEC safety approvals.
- טשאַרדזשינג: Up to 100A hybrid charging current.
- רעזולטאַט: Outputs high-quality pure sine wave AC power.
- סקאַלאַביליטי: Supports parallel connection of up to 6 units for increased capacity.
- פּלאַן: Industrial design with a modern aesthetic, easy to install and use.
- באַטערי פאַרוואַלטונג: Exclusive Li-ion battery BMS dual activation.
- קאָסט שפּאָרן: Time-slot function to optimize energy usage and save costs with peak-valley tariffs.
אַפּפּליקאַטיאָן סצענאַר:
- Residential Homes
- פאַרמס
- Telecommunication Sites
- Countryside Installations
- Island Power Systems
- Pasture Applications
4. ספּעסאַפאַקיישאַנז
Detailed technical specifications for the SRNE SYP 5K-S Hybrid Solar Inverter are provided below. For a visual representation, refer to Figure 4.
| קאַטעגאָריע | פּאַראַמעטער | Value (SYP 5K-S) |
|---|---|---|
| ינווערטער רעזולטאַט | רייטאַד רעזולטאַט מאַכט | 5,000 וו |
| מאַקס.פּיק מאַכט | 10,000VA | |
| רייטאַד רעזולטאַט וואָלtage | 230Vac (L/N/PE single-phase) | |
| מאַסע קאַפּאַציטעט פון מאָטאָרס | 4 הפּ | |
| רייטאַד אַק פרעקווענסי | 50/60 הז | |
| וואַוועפאָרם | ריין סינוס כוואַליע | |
| באַשטימען צייט | 10ms (טיפּיש) | |
| פּאַראַלעל קאַפּאַציטעט | 1-6 units (single/three phase) | |
| באַטערי | באַטערי טיפּ | Li-ion / Lead-acid / User-define |
| רייטאַד באַטערי וואָלtage | 48Vdc | |
| VoltagE ראַנגע | 40 ~ 60 וודק | |
| מאַקס.מפּט טשאַרדזשינג קראַנט | 100 א | |
| מאַקס.מאַינס / גענעראַטאָר טשאַרדזשינג קראַנט | 60 א | |
| מאַקס.היבריד טשאַרדזשינג קראַנט | 100 א | |
| פּוו אַרייַנשרייַב | Num. of MPPT | 1 |
| מאַקס.פּוו מענגע מאַכט | 5,500 וו | |
| מאַקס.ינפּוט קראַנט | 22 א | |
| מאַקס.וואָלtagE פון Open Circuit | 500Vdc | |
| MPPT VoltagE ראַנגע | 120 ~ 450 וודק | |
| Mains/Generator Input | אַרייַנשרייַב וואָלtagE ראַנגע | 90 ~ 280 וואַק |
| אָפטקייַט ראַנגע | 50/60 הז | |
| בייפּאַס אָווערלאָאַד קראַנט | 40 א | |
| עפעקטיווקייַט | MPPT טראַקינג עפעקטיווקייַט | 99.9% |
| מאַקס. באַטערי ינווערטער עפיקאַסי | 92% | |
| אַלגעמיינע | דימענשאַנז | 446.9*350*133mm (1.47*1.15*0.44ft) |
| וואָג | 13kg (28.66lb) | |
| שוץ גראַד | IP20, indoor only | |
| אַפּערייטינג טעמפּעראַטור ראַנגע | -10~55°C | |
| ראַש | <60dB | |
| קאָאָלינג אופֿן | Forced air cooling with adjustable air speed | |
| וואָראַנטי | 24 חדשים | |
| קאָמוניקאַציע | עמבעדיד ינטערפייסיז | RS485 / USB / Dry contact |
| External Modules (Optional) | ווי-פי / גפּרס | |
| Certification | זיכערקייַט | CE (IEC62109-1/2) |
| EMC | EN61000 | |
| RoHS |
5. סעטאַפּ
Proper installation is crucial for the safe and efficient operation of your inverter. Refer to the included quick start guide or video instructions for detailed steps. Below are general guidelines:
5.1 מאַונטינג
- The inverter is rated IP20 and is designed for דרינענדיק נוצן בלויז.
- Mount the inverter in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
- Ensure sufficient clearance around the unit for proper air circulation and cooling.
- Use appropriate mounting hardware to secure the inverter firmly to a vertical surface.
5.2 עלעקטריקאַל קאַנעקשאַנז
All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Refer to Figure 5 for an overview of the connection ports.
- באַטערי קשר: Connect the 48Vdc battery bank to the BAT+ and BAT- terminals. Ensure correct polarity. The inverter is compatible with Li-ion and Lead-acid batteries.
- PV אַרייַנגאַנג קאַנעקשאַן: Connect the solar panel array to the PV+ and PV- terminals. Ensure the PV array voltage is within the MPPT operating voltage range (120-450Vdc) and the open circuit voltagE טוט נישט יקסיד 500Vdc.
- AC Input (Mains/Generator): Connect the AC grid or generator input to the AC IN terminals. The input voltagדי קייט איז 90-280 וואַק.
- אַק רעזולטאַט: Connect your AC loads to the AC OUT terminals. The rated output voltagE איז 230Vac.
- קאָמוניקאַציע פּאָרץ: Utilize the RS485, USB, or Dry Contact ports for monitoring and control. Optional Wi-Fi/GPRS modules can be connected for external communication.
- פּאַראַלעל קשר: If using multiple inverters in parallel (up to 6 units), follow the specific instructions for parallel wiring provided in the detailed manual.
6. אַפּערייטינג ינסטרוקטיאָנס
6.1 פּאַוערינג אויף / אַוועק
- מאַכט אויף: After all connections are securely made and verified, switch on the battery breaker, then the PV array breaker, and finally the AC input breaker. Turn the inverter's main power switch to the 'ON' position. The display will illuminate, and the inverter will begin its startup sequence.
- מאַכט אַוועק: To shut down the system, first disconnect the AC output loads, then turn off the AC input breaker, followed by the PV array breaker, and finally the battery breaker. Turn the inverter's main power switch to the 'OFF' position.
6.2 Display and Monitoring
The integrated LCD display provides real-time information on system status, battery charge, PV input, AC output, and error codes. Use the navigation buttons below the display to cycle through different screens and settings. Refer to the detailed manual for specific menu navigation and parameter adjustments.
6.3 Time-Slot Function
The inverter includes a programmable time-slot function to optimize energy usage. This feature allows you to configure the inverter to prioritize certain power sources (e.g., battery, grid) during specific times of the day, helping to reduce electricity costs by utilizing cheaper off-peak energy or maximizing self-consumption of solar power.
7. וישאַלט
Regular maintenance ensures the longevity and optimal performance of your SRNE SYP 5K-S inverter.
- רייניקונג: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup, which can impede cooling. Use a dry, soft cloth. Do not use liquid cleaners.
- פֿאַרבינדונגען: יערליך קאנטראלירט אלע עלעקטרישע פארבינדונגען אויף פעסטקייט און צייכנס פון קאראזיע. פארשטארקט נאכאמאל אויב נויטיג.
- ווענטילאַטיאָן: Ensure that the inverter's cooling fans are free from obstructions and operating correctly. The inverter uses forced air cooling with adjustable air speed.
- סוויווע: Verify that the operating environment remains within the specified temperature range (-10~55°C) and that the IP20 rating (indoor only) is respected.
8. טראָובלעשאָאָטינג
This section provides guidance on common issues you might encounter. For complex problems, please contact technical support.
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| אינווערטער גייט נישט אן | No battery power; main switch off; loose connections | קוק די באַטאַרייע וואָלtage; ensure main switch is ON; verify all connections. |
| קיין AC רעזולטאַט | Overload; short circuit; inverter fault | Reduce load; check for short circuits; consult display for error codes. |
| PV אינפוט לאדט נישט אויף | Insufficient sunlight; PV array disconnected; MPPT fault | Check sunlight conditions; verify PV connections; ensure PV voltage איז אין קייט. |
| טעות קאָד געוויזן | ספּעציפֿישער סיסטעם פֿעלער | Refer to the detailed manual for specific error code meanings and troubleshooting steps. |
9. באַניצער עצות
- באַטערי קאַמפּאַטאַבילאַטי: Ensure your battery type (Li-ion or Lead-acid) is correctly configured in the inverter settings for optimal charging and discharge cycles.
- פּאַראַלעל אָפּעראַציע: When connecting multiple units in parallel, ensure all inverters are of the same model and firmware version for stable operation.
- מאָניטאָרינג: Regularly check the inverter's display or connected monitoring system (via RS485/USB/Wi-Fi/GPRS) to track performance and identify potential issues early.
10. וואָראַנטי & שטיצן
The SRNE SYP 5K-S Hybrid Solar Inverter comes with a 24-חודש וואָראַנטי פון די דאַטע פון קויפן. די וואָראַנטי קאָווערס חסרונות אין מאַטעריאַלס און ווערקמאַנשיפּ אונטער נאָרמאַל נוצן.
For technical support, product debugging assistance, or repair services, please contact your local dealer or the manufacturer's professional technical support team. Information regarding local repair outlets may be available through your point of purchase.
