1. הקדמה
The ALIENTEK HP20 Hot Plate Preheater is a compact and portable digital heating tool designed for precision temperature control in various applications, including reflow soldering and mobile phone repair. Featuring PD3.1 protocol support, PID temperature control, and a maximum heating power of 200W, the HP20 offers efficient and accurate heating performance. This manual provides essential information for the safe and effective use of your HP20 device.
2. סעטאַפּ
2.1 אויספּאַקן און קאָמפּאָנענטן
Carefully unpack your HP20 Hot Plate Preheater and verify that all components are present. The standard package includes:
- HP20 host (x1)
- C2C Data Cable, 140W (x1)
- Mini Shark Clip (Complimentary) (x2)
- Silicone Cover (Complimentary) (x1)
- פּאַקקאַגינג קעסטל (x1)
2.2 מאַכט קאַנעקשאַן
The HP20 supports multiple power supply methods:
- Type-C Port (PD3.1 / PD3.0 Protocols): Compatible with 140W, 100W, 65W GaN chargers and power banks (fast charging supported).
- DC Power Adapters: Supports 20V ~ 28V DC input.
Important: Only one of the DC port or Type-C port can be used at a time. Do not use both simultaneously, as this may damage the device.
Connect your chosen power source to the appropriate port on the HP20. The device will automatically match the maximum PD output power for optimal performance.
3. אַפּערייטינג ינסטרוקטיאָנס
3.1 מאַכט אויף / אַוועק
Once connected to a power source, the device will power on. Use the designated controls on the front panel to navigate and operate the device.
3.2 Temperature Control and Adjustable Power
The HP20 features PID temperature control for rapid and precise heating. The heating power is adjustable from 65W to 200W, allowing for fine-tuning to suit various power adapters and applications. The device supports a maximum temperature of 350°C.
The HP20 heats up quickly, reaching 260°C from room temperature in approximately 120 seconds (at 200W power). Refer to the comparison table for heating times at different power levels:
3.3 אַפּערייטינג מאָדעס
The HP20 offers three primary operating modes:
- קעסיידערדיק טעמפּעראַטור באַהיצונג: For stable and rapid temperature rise.
- ריפלאָוז סאַדערינג: Simulates reflow soldering with stagE-ביי-סtagE טעמפּעראַטור קאָנטראָל.
- פאַרריכטן: Supports integration with third-party repair platforms and temperature calibration.
3.3.1 Reflow Soldering Process
The reflow soldering mode provides intelligent temperature control through distinct stagעס:
- פּרעהעאַטינג סtage: Gradually raises the temperature.
- קעסיידערדיק טעמפּעראַטור סtage: Maintains a stable temperature.
- Reflow Stage: Peak temperature for solder reflow.
- קאָאָלינג שtage: Controlled cooling to solidify solder joints.
3.3.2 Mobile Phone Repair Scenarios
The repair mode allows for presetting preheating temperature and heating duration for four major scenarios:
- Debonding: Motherboard / SoC Edge Adhesive Softening.
- דעלאַמינאַטיאָן: Double-Layer Motherboard Uniform Temperature Separation.
- לאַמאַנייט: Large-Area Constant-Temperature Lamination.
- Solder Ball Mounting: Stable Constant Temperature, Full and Plump Solder Joints.
3.4 Bluetooth APP Connection
The HP20 supports Bluetooth connectivity, allowing for real-time data display and control via a dedicated mobile application. Pair your device with the HP20 to monitor temperature curves and adjust settings remotely.
3.5 מעניו סעטטינגס צובינד
The HP20's menu allows you to configure various parameters, including sleep time, power output, and temperature calibration. It supports multiple languages and temperature units (Celsius/Fahrenheit) for personalized use.
3.6 Colorful Lights Temperature Indication
The HP20 features a colorful light gradient that changes to indicate the temperature as it rises, providing a visual cue for the current heating status.
4. וישאַלט
4.1 Heat-Resistant Silicone Cover
A heat-resistant silicone cover is included to protect the heating plate and ensure safety during operation. Always place it gently on the heating surface when not in use or for protection.
4.2 רייניקונג
Ensure the device is powered off and cooled down before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.
4.3 Firmware אַפּדייט
The HP20 supports local mode firmware upgrades. This process typically involves connecting the device to a host computer and using the ATK-HP20 UPGRADE software. Refer to the official ALIENTEK website or support documentation for the latest firmware and detailed update instructions.
5. טראָובלעשאָאָטינג
The HP20 is equipped with comprehensive protection features to ensure safe operation. If you encounter any issues, consider the following:
- איבער-טעמפּעראַטור שוץ: The device will automatically shut down or reduce power if it detects excessive temperatures.
- איבער-קראַנט שוץ: זיכערהייטן קעגן איבערגעטריבענע קראַנט ציען.
- Fan / NTC Protection: Monitors fan operation and thermistor readings for abnormal conditions.
- Input Abnormality: Detects issues with the power input. Ensure only one power source is connected at a time.
- צייט-אויס שוץ: Prevents prolonged heating beyond set limits.
- Reflow Soldering Process Full-Link Protection: Ensures the reflow process adheres to safe parameters.
If the device displays an error message or behaves unexpectedly, power it off, disconnect the power source, wait a few minutes, and then reconnect. If the issue persists, consult the ALIENTEK support resources.
6. ספּעסאַפאַקיישאַנז
Below are the detailed specifications for the ALIENTEK HP20 Hot Plate Preheater:
| שטריך | דעטאַל |
|---|---|
| פּראָדוקט נאָמען | HP20 heating plate |
| פּראָדוקט מאָדעל | ATK-PTHP20 |
| גרייס (ל × ד × ה) | 104 מם × 64 מם × 50.6 מם |
| פּראָדוקט וואָג | ≥260ג |
| ארבעטן חלקtage | DC 20V~28V / Type-C (Max 28V) |
| Heating Power (Adjustable) | 65 וו ~ 200 וו |
| טעמפּעראַטור ראַנגע | 40°C~350°C |
| ינפּוט צובינד | DC5521 / Type-C |
| שנעל טשאַרדזשינג פּראָטאָקאָל | PD3.1 / PD3.0 / PD2.0 |
| סקרין | 1.47 inches IPS LCD, 320×172 (Resolution) |
| Certification | סע, פקק |
| פּעקל לענג | 25 סענטימעטער |
| פּעקל ברייט | 16 סענטימעטער |
| פּעקל הייך | 8 סענטימעטער |
| פּעקל וואָג | 0.5 קג |
7. באַניצער עצות
קיין ספעציפישע באַניצער עצות זענען נישט געווען בנימצא פֿון די צוגעשטעלטע רעviews or Q&A content. Always ensure to follow the safety guidelines and operating instructions for optimal performance and longevity of your device.
8. וואָראַנטי און שטיצן
For warranty information, technical support, or service inquiries, please refer to the official ALIENTEK webזייטל אדער קאָנטאַקט אייער הענדלער. האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן פֿאַר קיין וואָראַנטי קליימז.
