VIRE TPA3255 HIFI Audio Power Ampהעכער מאָדולע

1. הקדמה

This manual provides detailed instructions for the VIRE TPA3255 HIFI Class D Audio Power Amplifier Module. This high-performance amplifier board is designed for audio enthusiasts and professionals, offering robust power output in both stereo (2x300W) and mono (600W) configurations. It utilizes the original TPA3255 amplifier chip for superior audio quality and efficiency.

2. זיכערקייַט אינפֿאָרמאַציע

• שטענדיק זיכער מאַכן אַז די מאַכט צושטעל איזtage and polarity are correct before connecting to the amplifier board. Incorrect connections can cause severe damage to the module and connected devices.
• Avoid short circuits between terminals, especially speaker outputs and power inputs.
• Do not operate the module in wet or damp באדינגונגען. האַלט עס אַוועק פון פליסיקייטן.
• ענשור טויגן ווענאַליישאַן אַרום די amplifier board to prevent overheating, especially during high-power operation.
• Handle the board with care to avoid electrostatic discharge (ESD) damage.
• If you are unsure about any connection or operation, consult a qualified technician.

3. פּראָדוקט איבערview

3.1 פֿעיִקייטן

• הויך-פאָרשטעלונג שפּאָן: Utilizes the original TPA3255 amplifier chip for efficient Class D ampליפיקאַטיאָן.
• נידעריק ראַש און דיסטאָרשאַן: Incorporates the NE5532 chip to effectively reduce distortion and improve audio quality.
• Stable Power Output: Features shielded inductors and trimmer capacitors in the filter circuit for clear and stable power delivery.
• עפעקטיוו קאָאָלינג: Equipped with a large heat sink and a mini fan for excellent heat dissipation under continuous high-power output.
• Robust Power Filtering: Includes 4*470uf Black Gold Capacitors with large capacity, low ripple, and 63V withstand voltage.
• פולשטענדיק שוץ: Built-in protection mechanisms for input undervoltage, overheating (OTW), overcurrent, and short circuit.

3.2 קאַמפּאָונאַנץ

די amplifier board features the following key components and connection points:

• TPA3255 Ampליפיער שפּאָן: The core audio amplification component.
• NE5532 Op-Amp טשיפּ: For signal processing and distortion reduction.
• היץ זינק און קילער ווענטילאַטאָר: For thermal management.
• Power Capacitors: 4x 470uF Black Gold capacitors.
• Shielded Inductors: Part of the output filter.
• PVDD GND: DC power input terminals (24-54VDC for 2C300, 24-55VDC for 1C600).
• L+/L- & R+/R-: רעדנער רעזולטאַט טערמינאַלס.
• DACL GND DACR: Audio input terminals.
• FAN+ GND: Cooling fan power connection.
• MUTE GND: Mute control input.
• FAULT CLIP_OTW: Overheat protection indicator/output.

4. ספּעסאַפאַקיישאַנז

4.1 VIRE-2C300 (Stereo 2x300W)

4.2 VIRE-1C600 (Mono 600W)

5. סעטאַפּ און וויירינג

Carefully follow the wiring diagrams below for your specific amplifier module (Stereo 2C300 or Mono 1C600). Ensure all connections are secure and correct before applying power.

5.1 VIRE-2C300 (Stereo) Wiring Diagram

• Power Input (PVDD GND): Connect your DC power supply (24-54VDC, recommended 48V-54V, 10A or above) to the PVDD (positive) and GND (negative) terminals. Observe polarity carefully.
• Audio Input (DACL GND DACR): Connect your audio source (e.g., smartphone, pre-amplifier) to the DACL (Left Audio), GND (Audio Ground), and DACR (Right Audio) terminals. A 3.5mm audio jack connection is illustrated.
• Speaker Output (L+/L-, R+/R-): Connect your left speaker to L+ and L- terminals, and your right speaker to R+ and R- terminals. Ensure speaker impedance is 4-8Ω.
• Cooling Fan (FAN+ GND): Connect the provided mini fan to the FAN+ (positive) and GND (negative) terminals.
• Mute Control (MUTE GND): Connect a switch or control signal to the MUTE and GND terminals to enable/disable the mute function.
• Fault/Overheat Protection (FAULT CLIP_OTW): This terminal provides an output signal indicating fault conditions, including overheat protection.

5.2 VIRE-1C600 (Mono) Wiring Diagram

• Power Input (PVDD GND): Connect your DC power supply (24-55VDC, recommended 48V-55V, 10A or above) to the PVDD (positive) and GND (negative) terminals. Observe polarity carefully.
• Audio Input (DACL GND DACR): Connect your audio source (e.g., smartphone, pre-amplifier) to the DACL (Audio Input), GND (Audio Ground), and DACR (Audio Input) terminals. For mono, typically one channel (e.g., DACL) is used, or both can be connected for a summed mono signal. A 3.5mm audio jack connection is illustrated.
• Speaker Output (L+/L-): Connect your mono speaker to L+ and L- terminals. Ensure speaker impedance is 2-4Ω.
• Cooling Fan (FAN+ GND): Connect the provided mini fan to the FAN+ (positive) and GND (negative) terminals.
• Mute Control (MUTE GND): Connect a switch or control signal to the MUTE and GND terminals to enable/disable the mute function.
• Fault/Overheat Protection (FAULT CLIP_OTW): This terminal provides an output signal indicating fault conditions, including overheat protection.

5.3 Component Highlights

6. אָפּעראַציע

1. After completing all wiring as per the setup instructions, double-check all connections for correctness and security.
2. Ensure your audio source is connected and ready to play.
3. צולייגן מאַכט צו די amplifier board by connecting the DC power supply. The cooling fan should start operating.
4. Start playing audio from your source. Adjust the volume level from your audio source device.
5. Monitor the sound output for clarity and ensure there are no signs of distortion or unexpected behavior.
6. If using the mute function, activate it as needed.

7. טראָובלעשאָאָטינג

• קיין סאָונד רעזולטאַט:
  • Check if the power supply is connected and providing the correct voltage (24-54VDC/24-55VDC).
  • Verify that the audio input source is active and correctly connected to the DACL GND DACR terminals.
  • Ensure speaker wires are correctly connected to L+/L- and R+/R- (or L+/L- for mono) and are not shorted.
  • Check if the MUTE function is accidentally activated.
• פאַרקרימט סאָונד:
  • Ensure the power supply can provide sufficient current (recommended 10A or above). Insufficient current can lead to distortion at high volumes.
  • Verify that the speaker impedance matches the amplifier's specifications (4-8Ω for stereo, 2-4Ω for mono).
  • Reduce the input audio level from your source. Overdriving the input can cause distortion.
  • Check for loose or faulty wiring connections.
• Amplifier Shuts Down / Overheat Protection (FAULT CLIP_OTW):
  • Ensure the cooling fan is operating correctly and is not obstructed.
  • באַשטעטיקן אַז די amplifier board has adequate ventilation and is not enclosed in a confined space.
  • Reduce the output power or load on the ampליפער.
  • Check for short circuits in the speaker wiring, which can cause excessive current draw and heat.
• זשומען אדער גערויש:
  • Ensure all ground connections are solid.
  • Use shielded audio cables to minimize interference.
  • Check for ground loops in your audio system setup.
  • Ensure the power supply is clean and stable, without excessive ripple.

8. באַניצער עצות

• מאַכט צושטעלן קוואַליטעט: The performance of this amplifier is highly dependent on the quality of your power supply. Using a stable, low-noise DC power supply with sufficient current capacity (e.g., 48V-55V, 10A or higher) is crucial for optimal sound quality and power output.
• רעדנער צופּאַסונג: Always match your speaker's impedance to the amplifier's recommended range (4-8Ω for stereo, 2-4Ω for mono) to prevent damage and ensure efficient power transfer.
• טערמאַל פאַרוואַלטונג: Even with the built-in fan and heatsink, ensure the module is installed in an environment with good airflow. Avoid enclosing it in tight spaces without additional ventilation.
• Input Signal Level: Start with a low input volume from your audio source and gradually increase it to avoid sudden loud noises or clipping.

9. וישאַלט

• רייניקונג: פּיריאַדיקלי ריין די amplifier board and cooling fan to remove dust and debris. Use a soft brush or compressed air. Ensure the power is disconnected before cleaning.
• דורכקוק: Regularly inspect all wiring connections for looseness or corrosion. Check for any visible damage to components on the board.
• סוויווע: Store and operate the amplifier in a dry, cool environment, away from direct sunlight and extreme temperatures.

10. וואָראַנטי און שטיצן

For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly. Provide your product model and a detailed description of the issue for efficient support.