מאַניואַלז+

VEVOR GYSpot 2700 / GYSpot 2600

VEVOR Dent Repair Machine (GYSpot 2700/2600)

ינסטראַקשאַנז מאַנואַל

1. הקדמה

This manual provides detailed instructions for the safe and effective operation and maintenance of your VEVOR Dent Repair Machine, models GYSpot 2700 and GYSpot 2600. This versatile spot welder and dent puller is designed for professional vehicle panel repair, offering efficient solutions for various metal deformations.

VEVOR Dent Repair Machine with accessories
Figure 1: VEVOR Dent Repair Machine (GYSpot 2700) with included accessories.

2. זיכערקייַט אינסטרוקציעס

WARNING: Always read and understand all safety warnings and instructions before operating this equipment. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

  • Ensure the machine is connected to a properly grounded power source.
  • טראָגט פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט (PPE), אַרייַנגערעכנט שווייסער-העלם, הענטשקעס און שוץ-קליידער.
  • ניצט נישט די מאַשין אין דamp אָדער נאַס טנאָים.
  • האַלטן קינדער און אַנאָטערייזד פּערסאַנעל אַוועק פון די אַרבעט געגנט.
  • זיכער מאַכן גענוג ווענטילאַציע צו ויסמיידן ינאַליישאַן פון רויך.
  • אָפּשטעקן די מאַכט איידער איר דורכפירן קיין וישאַלט אָדער טוישן אַקסעסאָריעס.
  • Avoid direct contact with live electrical parts.
  • Do not use the machine for purposes other than its intended use.

3. Package Contents & Components

Your VEVOR Dent Repair Machine comes with a comprehensive set of accessories to facilitate various repair tasks.

Diagram of all included accessories for the VEVOR Dent Repair Machine
Figure 2: Standard Configuration of accessories.

אַרייַנגערעכנט אַקסעסעריז:

  • Dent Puller Machine (GYSpot 2700 or GYSpot 2600)
  • וועלדינג ביקס
  • Dent Puller (Slide Hammer)
  • קאַנעקטער
  • Manual Suction Cup
  • קאַרבאָן שטאַנגען
  • Wavy Line Wire
  • Draw Hook
  • Carbon Rod Chuck
  • ראָונד מעסאָן
  • Meson Chuck
  • Triangular Meson
  • Spot Welding Head
  • אָט מעסאָן
  • שליסל
  • Six Claw Hook
  • Accessory Kit Storage Box
Diagram showing the welding gun and dent puller attachments
Figure 3: Dual Guns Interface, showing the welding gun and dent puller.

4. סעטאַפּ

  1. קאָננעקט ערד דראָט: Attach the ground wire to the designated terminal on the machine. Ensure a secure connection to the vehicle's metal body, away from the repair area.
    Video Segment: Connecting the ground wire.

    For first-time use, the machine can polish off the galvanized layer on the grounding head, or connect the ground several times to allow the galvanized layer to come off naturally.

    Video Segment: Initial grounding process.
  2. Connect Sheet Metal Gun: Attach the sheet metal gun to its designated port on the machine.
    Video Segment: Connecting the sheet metal gun.
  3. מאַכט אויף: Turn the power switch clockwise to boot the machine. Continue turning clockwise to increase power as needed.
    Video Segment: Powering on and adjusting power.

5. אַפּערייטינג ינסטרוקטיאָנס

The VEVOR Dent Repair Machine offers multiple welding modes and functions for various dent repair scenarios.

5.1 קאָנטראָל פּאַנעל איבערview

Control panel of the VEVOR Dent Repair Machine with numbered functions
Figure 4: Control Panel with 5 Welding Modes and Power Switch.
  1. טרייענגולאַר מעסאָן ציען
  2. קייַלעכיק מעסאָן ציען
  3. אָט מעסאָן פּול
  4. כוואַליע ליניע וועלדינג
  5. קוילן שטאנג צו פארמאכן דעם פייער (הייצונג)
  6. Power Switch & Regulation Knob
  7. מאַנואַל / אָטאַמאַטיק סוויטש
  8. Error Indication Light
  9. מאַכט ינדיקאַטאָר ליכט

Use the Power Switch & Regulation Knob (6) to adjust the power. The Manual/Automatic Switch (7) allows you to select between manual and automatic operation modes. Carbon rod heating is typically performed in manual mode.

Video Segment: Adjusting for pulling gun and welding meson piece.

5.2 Dent Pulling with Slide Hammer

For general dent pulling, attach the slide hammer to the welding gun. Spot weld the tip to the center of the dent, then use the slide hammer to pull the dent out.

Video Segment: Demonstrating the use of a slide hammer for dent repair.

5.3 Welding Pulling Rings

For larger or more complex dents, pulling rings can be welded onto the car body. Insert the pulling ring into the welding gun's chuck, place it on the dented area, and activate the weld. Repeat for multiple rings as needed, then use a puller bar with hooks to extract the dent.

Video Segment: Welding pulling rings onto the car body.
Video Segment: Pulling the dent using a hammer with welded rings.

5.4 Welding Wavy Wire

For curved areas or long, narrow dents, wavy wire can be used. Select the wavy wire welding mode on the control panel. Place the wavy wire along the dent and spot weld it in sections. Once welded, use a pulling tool to straighten the panel.

Video Segment: Welding wavy wire on curved areas.

5.5 Carbon Rod Heating (Shrinking)

To shrink stretched metal or finish a repair, use the carbon rod heating function. Select the carbon rod mode, insert a carbon rod into the welding gun, and apply heat to the desired area to shrink the steel sheet.

Video Segment: Using carbon rod heating to shrink the steel sheet.

6. וישאַלט

  • רייניקונג: Regularly clean the machine and accessories, especially the welding gun tips and ground clamp, to ensure optimal conductivity and performance.
  • דורכקוק: Periodically inspect all cables, connections, and accessories for wear, damage, or loose fittings. Replace any damaged parts immediately.
  • קאָאָלינג סיסטעם: Ensure the side vents are clear of obstructions to allow for efficient heat dissipation.
  • סטאָרידזש: Store the machine and accessories in a dry, clean, and secure location when not in use. Use the provided compact toolbox for organizing accessories.
Image showing side vents for efficient cooling
Figure 5: Side vents for fast heat radiation.

7. טראָובלעשאָאָטינג

פּראָבלעם מעגלעך סיבה לייזונג
מאַשין טוט נישט מאַכט אויף קיין שטראָם צושטעל; פרייַ שטראָם קאַבל; אויסגעלאָשן קרייַז ברעאַקער. Check power connection; ensure power outlet is functional; reset circuit breaker.
נעבעך וועלדינג פאָרשטעלונג Poor grounding; dirty welding tips; incorrect power setting; oxidized metal surface. Ensure strong ground connection; clean welding tips; adjust power setting; clean the metal surface before welding.
Overheating indicator active Prolonged use; blocked ventilation; excessive ambient temperature. Allow machine to cool down; clear ventilation openings; operate in a cooler environment.
Dent pulling is ineffective Insufficient power; improper attachment of pulling accessories; weak weld. Increase power setting; ensure accessories are correctly attached and securely welded.

8. ספּעסאַפאַקיישאַנז

GYSpot 2700

  • Model: GYS2700
  • קאָליר: געל
  • מאַקס אַוטפּוט קראַנט: 3500A
  • אַרייַנשרייַב וואָלtage: 220 וו
  • אַרייַנגאַנג מאַכט: 2KW
  • Input Current Fuse: 16A
  • Work Model: 5 Modes Available
  • Single Side Welding Thickness: 0.02 - 0.05 in / 0.6 - 1.2 mm
  • Dimensions (L x W x H): 8" x 12.5" x 10" / 20.5 x 32 x 25.5 cm
  • וואָג: 53.8 לבס / 24.4 קג
Dimensions of the GYS2700 Dent Repair Machine
Figure 6: GYS2700 Machine Dimensions.

GYSpot 2600

  • Model: GYS2600
  • מאַקס אַוטפּוט קראַנט: 3500A
  • אַרייַנשרייַב וואָלtage: 220 וו
  • אָפטקייַט: 60 הז
  • אַרייַנגאַנג מאַכט: 2KW
  • Input Current Fuse: 16A
  • Work Model: 5 Modes Available
  • Single Side Welding Thickness: 0.02 - 0.05 in / 0.6 - 1.2 mm
  • Dimensions (L x W x H): 8" x 12.5" x 10" / 20.5 x 32 x 25.5 cm
  • וואָג: 53.8 לבס / 24.4 קג
Dimensions of the GYS2600 Dent Repair Machine
Figure 7: GYS2600 Machine Dimensions.

9. באַניצער עצות

  • מאָדעל דיפפערענסעס: The primary difference between the GYS2700 and GYS2600 models lies in their current output, with the GYS2700 having a current of 2700 and the GYS2600 having a current of 2600. Both models share many core features and accessories.
  • ייבערפלאַך צוגרייטונג: Always ensure the metal surface is clean and free of paint, rust, or grease before welding for optimal adhesion and repair quality.
  • פּראַקטיסיז: If you are new to dent repair, practice on scrap metal to get a feel for the machine's settings and techniques before working on your vehicle.

10. וואָראַנטי & שטיצן

VEVOR provides a one-year warranty for this product. For any after-sales problems or technical support, please contact VEVOR customer service. Ensure you have your purchase details and model number ready when contacting support.

VEVOR is dedicated to providing tough equipment & tools at incredibly low prices, backed by 24/7 attentive service.