POSEIDON SMT40 Tattoo Pen Kit User Manual

הקדמה

Welcome to the POSEIDON SMT40 Tattoo Pen Kit user manual. This guide provides essential information for the safe and effective use of your new tattoo machine kit. Please read all instructions carefully before operating the equipment to ensure proper setup, operation, and maintenance. This kit is designed for embroidery tattooing and permanent makeup applications.

וואָס איז אין די קעסטל

Your POSEIDON Tattoo Pen Kit includes the following components:

• Tattoo Pen (1)
• פֿיס פּעדאַל (1)
• Power Source (1)
• Shavers (1)
• RCA Connector (1)
• Poseidon Tattoo Cartridge Needles (20 total: 1205RL/5PCS + 1207RL/5PCS + 1209RS/5PCS + 1007CM/5PCS)
• 5cm Black Bandage (1)
• Painting Brush (1)
• Tattoo Clean Pad (4)
• Gloves (1 Pair)
• Tattoo Transfer Paper (4)
• Tattoo Practice Leather (2)
• Tattoo Ink Cups (20 medium size / 20 small-sized)

ספּעסאַפאַקיישאַנז

סעטאַפּ אינסטרוקציעס

1. אָפּלייגן קאַמפּאָונאַנץ: נעמט פֿאָרזיכטיק אַרויס אַלע זאַכן פֿון דער פּאַקעט און קאָנטראָלירט קעגן דער "וואָס איז אין דער קעסטל" ליסטע.
2. פאַרבינדן מאַכט צושטעלן: Plug the power source into a suitable electrical outlet.
3. פאַרבינדן פֿוס פּעדאַל: Insert the foot pedal's jack into the 'FOOT' port on the power supply.
4. Connect RCA Cord: Attach one end of the RCA cord to the tattoo pen and the other end to the 'L' (Liner) or 'S' (Shader) port on the power supply, depending on your intended use. The power supply supports two usage modes for liner and shader.
5. Attach Needle Cartridge: Gently twist and push a sterile needle cartridge into the front end of the tattoo pen until it clicks securely into place. Ensure the needle is properly seated.
6. אַדזשאַסטירן נאָדל טיפקייט: דריי דעם גריפ פון די טאַטו פעדער צו סטרויערן די נאָדל טיפקייט צו אייער געוואונטשענע סעטינג.
7. מאַכט אויף: Press the power button on the power supply to turn it on. The digital display will show the current voltage.
8. סטרויערן וואָלtage: Use the '+' and '-' buttons on the power supply to adjust the working voltage (recommended range 4-12V).

אַפּערייטינג ינסטראַקשאַנז

1. צוגרייטונג: Ensure your workspace is clean and sterile. Wear the provided gloves.
2. Ink Loading: Pour a small amount of tattoo ink into a sterile ink cup. Dip the tip of the needle cartridge into the ink, allowing it to draw ink into the reservoir.
3. Initiate Tattooing: Press the foot pedal to activate the tattoo pen. The needle will begin to move.
4. אַפּפּליקאַטיאָן: Apply the needle to the practice leather or prepared skin surface with appropriate pressure and technique for lining or shading.
5. Voltage אַדזשאַסטמאַנט: סטרויערן די וואַלtage as needed during the tattooing process to achieve optimal performance for different techniques and skin types.
6. פּויזע / האַלטן: Release the foot pedal to pause or stop the tattoo pen.
7. Needle Change: To change a needle, twist and pull the used cartridge out. Dispose of it safely in a sharps container. Insert a new sterile cartridge as described in the Setup section.

וישאַלט

• רייניקונג: After each use, disconnect the tattoo pen from the power supply. Wipe down the exterior of the tattoo pen and power supply with a disinfectant wipe. Do not immerse the power supply or tattoo pen in liquid.
• נאָדל באַזייַטיקונג: Always dispose of used needle cartridges in a designated sharps container to prevent accidental injury and contamination.
• סטאָרידזש: Store the tattoo pen kit in a clean, dry place away from direct sunlight and extreme temperatures.
• קאָרד זאָרגן: Inspect the RCA cord and power supply cord regularly for any signs of wear or damage. Replace if necessary.
• מאָטאָר קער: The tattoo pen features a high-quality motor designed for durability. Avoid excessive force or dropping the pen to prevent damage to the internal mechanism.

טראָובלעשאָאָטינג

• Pen Not Turning On:
  • Check if the power supply is properly plugged into an outlet.
  • Ensure the RCA cord is securely connected to both the tattoo pen and the power supply.
  • Verify the foot pedal is connected correctly.
  • Confirm the power supply is switched on.
• Weak Needle Movement:
  • פאַרגרעסערן די וואָלtage on the power supply.
  • Check if the needle cartridge is properly seated and not obstructed.
  • Ensure the needle is not dull or bent.
• איבערגעטריבענע ווייבריישאַן/גערויש:
  • Ensure the needle cartridge is fully and correctly inserted.
  • Check for any loose parts on the tattoo pen.
  • If the issue persists, the motor may require inspection by a qualified technician.
• טינט פלאָוינג נישט:
  • Ensure the needle is adequately dipped into the ink to draw it into the cartridge.
  • Check for blockages in the needle cartridge.
  • Verify the needle depth is set correctly.

באַניצער עצות

• פּראַקטיצירן ערשט: Always practice on the provided tattoo practice leather before working on actual skin to get a feel for the machine and different techniques.
• Hygiene is Key: Maintain strict hygiene protocols. Always use new, sterile needles and clean your equipment thoroughly.
• Voltage עקספּערימענט: Different tattoo techniques (lining, shading, color packing) and different skin types may require varying voltages. Experiment on practice skin to find your preferred settings.
• נאָדל אויסוואַל: The kit includes various needle configurations (RL for Round Liner, RS for Round Shader, CM for Curved Magnum). Understand the purpose of each needle type for optimal results.
• באַקוועם גריפּ: The pen features a hand-slip anti-slip design. Utilize this for a comfortable and stable grip during long sessions.

וואָראַנטי און שטיצן

For any issues or questions regarding your POSEIDON SMT40 Tattoo Pen Kit, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.