Cada C61076 RC Tiltrotor Aircraft Instruction Manual

1. הקדמה

Thank you for choosing the Cada C61076 RC Tiltrotor Aircraft building block set. This set allows you to construct a detailed and functional remote-controlled tiltrotor aircraft model with 1436 pieces. Designed for enthusiasts aged 8 and above, this model features intricate mechanical functions, including rotating propellers, adjustable rotor angles, and RC driving and steering capabilities when equipped with the optional power pack.

The Cada C61076 RC Tiltrotor Aircraft model.

2. זיכערקייַט אינפֿאָרמאַציע

• טשאָקינג סכנה: This product contains small parts and is not suitable for children under 3 years old. Adult supervision is recommended during assembly and play for younger users.
• באַטערי זיכערקייַט: If using the optional power pack, ensure batteries are inserted correctly according to polarity. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product is not used for an extended period. Do not attempt to recharge non-rechargeable batteries.
• קאַליפאָרניאַ פאָרשלאָג 65 ווארענונג: ⚠ וואָרענונג: דאָס פּראָדוקט קען אייך אויסשטעלן צו כעמיקאַלן אַרייַנגערעכנט פטאַלאַטן (DEHP), וואָס איז באַקאַנט אין קאַליפאָרניע צו פאַראורזאַכן ראַק און געבורט-דעפעקטן אָדער אַנדערע רעפּראָדוקטיווע שאָדן. פֿאַר מער אינפֿאָרמאַציע גייט צו www.P65Warnings.ca.gov.
• אַפּערייטינג סוויווע: Operate the RC model in open areas, away from obstacles, people, and pets. Avoid operating in wet conditions or near water.

3. פּעקל אינהאַלט

The Cada C61076 set includes:

• 1436 בוי־בלאָק שטיקלעך
• Instruction Manual for Assembly
• ווייַז שטיין

Optional Power Pack (Sold Separately):

• 1 x L Size Motor (Pro series)
• 1 x Servo (Pro series)
• 1 x Lipo Battery Box
• 1 x 2.4GHz Radio Control

Optional power pack components (sold separately).

4. ספּעסאַפאַקיישאַנז

Product dimensions and piece count.

דעטאַלירטע פּראָדוקט אינפֿאָרמאַציע.

5. סעטאַפּ

5.1 פֿאַרזאַמלונג

Follow the step-by-step instructions provided in the included building manual to assemble your Cada C61076 Tiltrotor Aircraft. Ensure all pieces are securely connected to prevent structural instability.

5.2 Optional Motorization and Battery Installation

For remote control functionality, the optional power pack (sold separately) is required. This includes an L size motor, a Servo, a Lipo Battery Box, and a 2.4GHz Radio Control.

• Install Lipo Battery Box: Carefully integrate the Lipo Battery Box into the designated compartment within the aircraft model as shown in the assembly instructions. This powers the rotors and driving mechanism.
• Install L Size Motor: Connect the L size motor to the appropriate gears for rotor rotation and driving, following the assembly guide.
• Install Servo: Connect the Servo to the steering mechanism for controlling the aircraft's direction.
• ינסטאַלירן רימאָוט קאָנטראָל באַטעריז: Open the battery compartment on the 2.4GHz Radio Control and insert 2x AA 1.5V batteries (not included), observing correct polarity.

Internal components: 2.4GHz Lipo Battery Box, L Size Motor (Pro series), and Servo (Pro series).

5.3 Display Stand Assembly

The included display stand can be assembled to showcase your completed model. Follow the instructions to connect the stand components and securely place the aircraft on it.

Assembly of the display stand.

6. אַפּערייטינג ינסטרוקטיאָנס

The Cada C61076 Tiltrotor Aircraft features three functional modes controlled by toggles and the remote control. Ensure the optional power pack is installed and powered on before operation.

6.1 רימאָוט קאָנטראָל איבערview

Remote control layout with indicator light, power button, driving/rotor rotations, and steering controls.

• מאַכט קנעפּל: טוט אן/אויסדרייען די ווײַטקאָנטראָל.
• ינדיקאַטאָר ליכט: ווײַזט דעם סטאַטוס פֿון דער ווײַטקאָנטראָל.
• לינקס דזשויסטיק: Controls driving and rotor rotations.
• רעכט דזשויסטיק: Controls steering.

6.2 Functional Modes (3 Gears)

The aircraft has three distinct operational modes, or 'gears' that can be engaged using the internal toggles and external knob/remote control.

Diagram of the control mechanism showing toggles and functions.

• 1st Gear: Propellers Rotation, Rotors Vertical Position
  To engage: Move the left toggle forward. Then, use the קנופּ on the aircraft to set the rotors to a vertical position, allowing for propeller rotation.

1st Gear: Move left toggle forward, use knob for vertical rotor position and propeller rotation.

• 2nd Gear: Rotor Angle Change (85°)
  To engage: Move the right toggle forward. ניצן די ראַדיאָ קאָנטראָל to adjust the rotor angle by 85 degrees.

2nd Gear: Move right toggle forward, use radio control for 85-degree rotor angle change.

• 3rd Gear: RC Driving and Steering (Rotors Horizontal Position of 85°)
  To engage: Move the right toggle backward. ניצן די קנופּ or ראַדיאָ קאָנטראָל for rear wheel steering and driving. The rotors will be in a horizontal position of 85 degrees.

3rd Gear: Move right toggle backward, use knob/radio control for rear wheel steering.

6.3 Detailed Features

• Double Sit Cockpit: The cockpit features two seats for minifigures (not included).
• עפן טירן: The aircraft has functional opening doors.
• Tilt-Axis Gearbox: Allows for the dynamic adjustment of rotor angles.
• Double Tail: Enhances the realistic appearance and stability of the model.

Attention to details: Pitot tube, double sit cockpit, opening door, tilt-axis gearbox, double tail, rotors, control knob.

6.4 פּראָדוקט דעמאָנסטראַציע ווידעאָ

Watch this video for a comprehensive demonstration of the Cada C61076's features and remote control operation.

7. וישאַלט

• רייניקונג: Use a soft, dry cloth to gently wipe down the model and remote control. Avoid using harsh chemicals or abrasive materials.
• סטאָרידזש: Store the model in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove batteries from the remote control and the Lipo Battery Box (if installed).
• טשעק קאַנעקשאַנז: Periodically check all building block connections to ensure they are secure. For motorized models, ensure all electrical connections are firm.

8. טראָובלעשאָאָטינג

• Model not moving/rotors not spinning:
  - Ensure the optional power pack (Lipo Battery Box, L Size Motor, Servo) is correctly installed and fully charged.
  - Check that the remote control has fresh AA batteries and is powered on.
  - Verify all electrical connections are secure.
• ווײַטקאָנטראָל רעאַגירט נישט:
  - Replace the AA batteries in the remote control.
  - Ensure the remote control is within the operating range (~30m).
  - Check for any interference from other 2.4GHz devices.
• שוועריקייט מיט פֿאַרזאַמלונג:
  - Refer to the detailed step-by-step building instructions provided with the set.
  - Double-check that you are using the correct pieces for each step.
• Is the helicopter flying?
  - Please note that this is a building block model designed for ground-based RC driving and steering, with functional rotating propellers and adjustable rotor angles. It is not designed for aerial flight.

9. באַניצער עצות

• Optional Power Pack: Remember that the motorization components (L size motor, Servo, Lipo Battery Box, and 2.4GHz Radio Control) are sold separately. If you desire RC functionality, ensure you purchase these components.
• Assembly Patience: Building this 1436-piece model requires patience and attention to detail. Take your time and enjoy the building process.
• ווייַז: Utilize the included display stand to proudly exhibit your completed Tiltrotor Aircraft model.

10. העסקעם אינפֿאָרמאַציע

דאס פּראָדוקט איז CE סערטיפיצירט, וואָס ווײַזט אַז עס איז אין לויט מיט די אייראפעישע געזונט, זיכערקייט און סביבה סטאַנדאַרדן.

11. וואָראַנטי און שטיצן

For any questions, concerns, or support regarding your Cada C61076 RC Tiltrotor Aircraft, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.