Diymore Wireless RF Module Receiver Instruction Manual

1. הקדמה

The Diymore Wireless RF Module (Model: RX480-E-WQ) is a versatile receiver designed for remote control applications. This module features built-in learning code 1527 decoding, supporting both 315MHz and 433MHz frequencies. It offers multiple operating modes including inching, self-locking, and interlocking, making it suitable for a wide range of projects from smart home automation to security systems. The remote control utilizes the EV1527 encoding method, ensuring each remote has an independent address code to prevent cross-coding and mutual interference.

2. ספּעסאַפאַקיישאַנז

3. קאַמפּאָונאַנץ ינקלודעד

Each package typically includes:

• Diymore Wireless RF Receiver Module(s) (RX480-E-WQ)

Note: This manual focuses on the receiver module. Compatible transmitters are sold separately or as part of a complete kit.

4. סעטאַפּ און ייַנמאָנטירונג

4.1 Pinout and Wiring

The receiver module features several pins for power, ground, and data output. Refer to the diagram below for correct wiring.

4.2 Learning Mode Configuration

The receiver module features a 'Learning setting key' to configure its operating mode and pair with a remote control. The module adopts a key selection mode, eliminating the need for soldering or jumpers.

1. אויסקלייַבן אַפּערייטינג מאָדע:
   • Inching Mode (Jog Mode): Press the learning key אַמאָל.
   • זעלבסט-שלאָסן מאָדע: Press the learning key צוויי מאָל.
   • Interlocking Mode: Press the learning key דרײ מאל.
2. Code Matching (Pairing):

   After selecting the desired operating mode, the module enters code matching mode. Press any button on your compatible remote control. The LED on the decoding module will flash three times after successfully receiving the signal, then turn off, indicating successful pairing.

   If no signal is received within 6 seconds, the system will automatically exit the learning and code matching mode.
3. קלאָר קאָד:

   To clear all learned remote control codes, press the learning key eight times. The LED will flash 8 times to confirm that all codes have been cleared. It is recommended to clear existing codes before learning new ones or changing the working mode.

5. אַפּערייטינג מאָדעס

The RX480-E-WQ module supports three distinct operating modes, selectable via the learning key:

• Inching Mode (Jog Mode): In this mode, the corresponding output (D0-D3) will be high only for as long as the remote control button is pressed. Once the button is released, the output returns to a low level. This is ideal for momentary actions, like opening a gate for a brief period.
• זעלבסט-שלאָסן מאָדע: When a remote control button is pressed once, the corresponding output will switch to a high level and remain high. Pressing the same button again will switch the output back to a low level. This acts like a toggle switch, suitable for turning lights on/off.
• Interlocking Mode: In interlocking mode, only one output can be active (high) at any given time. When a remote control button is pressed, its corresponding output goes high, and all other outputs (D0-D3) automatically switch to a low level. This is useful for applications where only one function should be active at a time, such as controlling multiple motors where only one should run at once.

6. טראָובלעשאָאָטינג

• מאָדול צינדט זיך נישט אָן: Ensure the DC 3.3V-5V power supply is correctly connected to the +V and GND pins and that the voltage איז אין די ספּעסיפיעד קייט.
• קיין ענטפער פון ווײַטקאָנטראָל:
  • Verify that the remote control is compatible (EV1527 encoding).
  • Ensure the remote control has fresh batteries (if applicable).
  • Confirm that the remote control has been successfully paired with the receiver module using the learning procedure.
  • Check for strong interference sources nearby.
• Short receiving distance:
  • Ensure the antenna on the receiver module is properly connected and unobstructed.
  • Minimize physical obstructions (walls, metal objects) between the remote and receiver.
  • Avoid placing the module near other RF-emitting devices.
• Incorrect operating mode: Re-perform the learning mode configuration (Section 4.2) to ensure the desired mode (inching, self-locking, or interlocking) is correctly set. Remember to clear existing codes before setting a new mode.

7. באַניצער עצות

• אָפטקייַט סעלעקציע: Ensure that both your receiver module and remote control operate on the same frequency (either 315MHz or 433MHz) for proper communication.
• אַנטענע אָרט: For optimal receiving distance, ensure the module's antenna is extended and kept clear of other components or metal enclosures.
• טעסטינג מאָדעס: Before integrating the module into a final project, thoroughly test each operating mode (inching, self-locking, interlocking) to confirm it behaves as expected with your remote control.
• מאַכט צושטעלן פעסטקייַט: Use a stable and clean DC 3.3V-5V power supply to prevent erratic behavior or damage to the module.

8. וישאַלט

• Keep the module in a dry environment to prevent moisture damage.
• ויסמיידן יקספּאָוזינג די מאָדולע צו עקסטרעם טעמפּעראַטורעס אָדער דירעקט זונשייַן.
• Clean the module gently with a dry, soft cloth if necessary. Do not use liquids or harsh chemicals.
• ענשור אַז אַלע קאַנעקשאַנז בלייבן זיכער און פריי פון קעראָוזשאַן.

9. פעלד פון אַפּפּליקאַטיאָן

The Diymore Wireless RF Module is suitable for a variety of applications, including but not limited to:

• אַקסעס קאָנטראָל סיסטעמען
• Smart home automation (e.g., lighting, appliance control)
• זיכערהייט סיסטעמען
• Wireless control switches
• Hotel room control systems
• Electric vehicle remote control
• מאָניטאָרינג סיסטעמען
• DIY electronic projects requiring remote activation

10. וואָראַנטי און שטיצן

For any technical assistance, troubleshooting, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.