Instruction Manual: Bread Bucket and Kneading Blade

הקדמה

This manual provides instructions for the installation, operation, and maintenance of your replacement bread bucket and kneading blade. This product is designed as a direct replacement part for specific Donlim bread maker models, ensuring optimal performance and fit. Please refer to your original bread maker's instruction manual for specific recipes, program settings, and safety guidelines.

סעטאַפּ און ינסטאַלירונג

1. אויספּאַקן: Carefully remove the bread bucket and kneading blade from their packaging. Inspect both items for any signs of damage.
2. ערשט רייניקונג: Before first use, wash the bread bucket and kneading blade with warm, soapy water. Rinse thoroughly and dry completely. Ensure no water remains in the shaft area of the bucket.
3. Installing the Kneading Blade: Locate the drive shaft at the bottom center of the bread bucket. Align the kneading blade with the shaft and press it down firmly until it clicks into place. Ensure it rotates freely but is securely attached.
4. Installing the Bread Bucket: Open the lid of your Donlim bread maker. Carefully lower the bread bucket into the baking chamber, aligning the bottom of the bucket with the bread maker's drive mechanism. Press down and rotate slightly until the bucket is securely seated and locked in place. Refer to your bread maker's original manual for precise locking instructions.

וויכטיק: Always ensure the bread bucket and kneading blade are correctly installed before adding ingredients or starting a baking cycle.

אַפּערייטינג ינסטראַקשאַנז

This bread bucket and blade function identically to the original parts. For detailed operating instructions, including ingredient measurements, recipe selection, and program usage, please consult the instruction manual provided with your specific Donlim bread maker model.

• Ensure the kneading blade is properly installed on the shaft before adding ingredients.
• Add ingredients in the order specified by your recipe.
• Close the bread maker lid securely before starting the baking cycle.

וישאַלט און רייניקונג

Proper care will extend the life of your bread bucket and kneading blade.

1. נאָך יעדער נוצן: Allow the bread bucket and blade to cool completely. Remove any remaining bread or dough.
2. Cleaning the Bucket: Wash the bread bucket by hand with warm water and a mild dish soap. Use a soft sponge or cloth to avoid damaging the non-stick coating. Do not use abrasive cleaners or scouring pads.
3. רייניקונג די בלייד: Remove the kneading blade from the shaft. Clean it with warm, soapy water, paying attention to any dough residue around the shaft opening.
4. דרייינג: Thoroughly dry all parts before storing. Ensure the drive shaft area of the bucket is completely dry to prevent rust or damage.
5. סטאָרידזש: Store the clean and dry bread bucket and blade in a safe place, preferably inside the bread maker, to prevent scratches or damage.

באַמערקונג: The bread bucket and kneading blade are generally not dishwasher safe, as harsh detergents and high heat can degrade the non-stick coating and other materials.

טראָובלעשאָאָטינג

• Kneading Blade Not Turning:
  • Ensure the blade is correctly seated on the drive shaft.
  • Verify the bread bucket is properly locked into the bread maker's baking chamber.
  • Check for any obstructions around the blade or shaft.
• Bread Sticking to Bucket:
  • Ensure the non-stick coating is not damaged.
  • Always clean the bucket thoroughly after each use.
  • Consider lightly greasing the bucket with cooking oil or butter before adding ingredients, especially for sticky doughs.
• קאַמפּאַטאַבילאַטי ישוז:
  • This product is specifically designed for Donlim models DL-TM018, BM-1888, BM-1348, BM-1353F, DL-T15A, 4706W, TM018W. Using it with other brands or models may result in improper fit or function. Always verify your bread maker's model number against the compatibility list.

ספּעסאַפאַקיישאַנז

באַניצער עצות

• באַשטעטיקן קאַמפּאַטאַבילאַטי: פארן קויפןasing or installing, always double-check that your bread maker's model number is listed as compatible to ensure a perfect fit and function. This bucket is specifically for Donlim bread makers and may not fit other brands or types of kitchen appliances.
• מילד רייניקונג: To preserve the non-stick coating, avoid using metal utensils or abrasive sponges when cleaning. A soft cloth or sponge is recommended.
• בלייד באַזייַטיקונג: If the kneading blade is difficult to remove after baking, fill the bucket with warm water and let it soak for 10-15 minutes. This will soften any stuck-on dough, making removal easier.

וואָראַנטי און שטיצן

For any questions regarding the installation, operation, or maintenance of your bread bucket and kneading blade, please contact the seller or manufacturer's customer support. Keep your purchase receipt for any warranty claims.