1. הקדמה
The Delta TP04G-BL-CU is a 4-line Text Panel Human Machine Interface (HMI) designed for industrial control applications. It provides a user-friendly interface for displaying program status, inputting values, and executing commands within a PLC (Programmable Logic Controller) system. This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your TP04G-BL-CU Text Panel.
2. פּראָדוקט איבערview
The TP04G-BL-CU features a monochrome STN-LCD display, numeric and function keys, and LED indicators for power and alarm status. It supports communication via RS-232 and USB for program download.
2.1 פראָנט פּאַנעל קאָמפּאָנענטן
Figure 1: Product Outline and Dimensions with Labeled Components
- Power Indicator (Green LED): Lights up when the panel receives power via USB or DVPACAB2A30P connection.
- Alarm Indicator (Red LED): Flashes to indicate specific statuses (e.g., 3 flashes for DVPACAB2A30P connection, or with buzzer for matched user settings).
- ווייַז שטח: The LCM display area where current program status and information are shown.
- נומעריק קיז (0-9): Used for numeric input and can be user-defined as function keys.
- F שליסל: A user-definable function key.
- ESC שליסל: Used to escape or exit current operations.
- Enter Key (ENT): Used to input a value or accept a programming command.
- פײַל קנעפּלעך (אַרויף/אַראָפּ/לינקס/רעכטס): Used to increase/decrease values, move up/down pages, or select the position of a value.
2.2 הינטערשטע פּאַנעל קאָמפּאָנענטן
פיגורע 2: דערציען View of the TP04G-BL-CU showing ports and model information
- וסב פּאָרט: Used for program download from a PC.
- RS-232 Communication Port: A 9-pin D-SUB male connector for communication with a PLC.
- באַשטעטיק שליסל: Located on the back panel for resetting the device.
3. ספּעסאַפאַקיישאַנז
3.1 עלעקטריקאַל ספּעסאַפאַקיישאַנז
| ספּעק | TP04G-BL-CU |
|---|---|
| קפּו | STM32F103 |
| פּראָגראַם זכּרון | 256KB בליץ זכּרון |
| באַראַן פון סיסטעם | 96KB Byte |
| פונדרויסנדיק אַרייַנשרייַב מאַכט | Program download: PC provides 5V power through USB interface. Normal operation: PLC provides 5V power (1.7W Max.) through RS-232 interface. |
| וואָטערפּרוף קלאַס פון פראָנט טאַפליע | IP66 / NEMA4 |
| אַפּערייטינג טעמפּעראַטור פֿאַר ייַזנוואַרג | 0°C ~ 50°C; 20% - 90% RH (non-condensing) |
| סטאָרידזש טעמפּעראַטור. פֿאַר ייַזנוואַרג | -20°C ~ 60°C |
| Vibration (IEC61131-2, IEC 68-2-6 (TEST Fc)) | 5Hz ≤f< 8.4Hz: Continuous: 3.5mm 8.4Hz ≤f≤150Hz: Continuous: 1.0g |
| Shock (IEC61131-2, IEC 68-2-27 (TEST Ea)) | 15g peak, 11ms duration, half-sine, three shocks in each direction per axis, on 3 mutually perpendicular axes (total of 18 shocks). |
| Radiated emission (CISPR11, Class A) | Frequency: 30-230MHz, Limits: 40dB uV/m Frequency: 230MHz-1GHz, Limits: 47dB uV/m |
3.2 Function Specifications
| ספּעק | TP04G-BL-CU |
|---|---|
| פאַרשטעלן טיפּ / ווייַז קאָליר | STN-LCD / מאַנאַקראָום |
| דרייווער | דעלטאַ פּראָדוקטן |
| פֿונקציע / נומעריק שליסלען | 0-9, ESC, F, Enter and Left/Right/Up/Down Keys |
| שרעק געפירט ינדיקאַטאָר (רויט) | Power on indication (Blink for three times) קאָמוניקאַציע טעות שרעק ספּעציעלע אָנווייַז דורך באַניצער פּראָגראַממינג |
| באַקלייט | Automatic turn-off time: 1~99 minutes (0 = do not turn off) Life span: ~50,000 hours at 25°C |
| קאַנטראַסט אַדזשאַסטמאַנט | באַשטעטיקט דורך ווייכווארג, 10 לעוועלס פון אַדזשאַסטמאַנט |
| שפּראַך / פאָנט | ASCII (Code page 850), Alphanumeric (including European char.), Traditional Chinese fonts, Simplified Chinese fonts |
| האַכלאָטע | 192 X 64 דאַץ |
| ווייַז קייט | 101.8mm (W) x 35.24mm (H); 4.1" (diagonal preferred) |
| Font size (ASCII) | 5x8, 8x8, 8x12, 8x16 |
| ווייַז טעקסט | 5x8 dots: 38 characters x 8 rows 8x8 dots: 24 characters x 8 rows 8x12 dots: 24 characters x 5 rows 8x16 dots: 24 characters x 4 rows |
| סיריאַל קאָמוניקאַציע פּאָרט | אַסינטשראָנאָוס טראַנסמיסיע אופֿן: רס-232 Data length: 7 or 8 bits Stop bits: 1 or 2 bits Parity: None/Odd/Even Baud rate: 9600bps~115200bps RS-232: 9 Pin D-SUB male |
| פאַרלענגערונג קאָמוניקאַציע פּאָרט | ניט געשטיצט |
| צוריק טאַפליע | פיטשערד מיט באַשטעטיק שליסל |
| מאָניטאָר אופֿן | אראפקאפיע פּראָגראַם צו טפּ דורך ווירטואַל קאַם פּאָרט |
3.3 Physical Dimensions and Mounting
Figure 3: Mounting Dimensions (Panel Cutout and Top View)
- Overall Dimensions (Front View): 175.8 mm (W) x 108.6 mm (H) x 37 mm (D) [6.921 x 4.276 x 1.457 inches].
- דימענסיעס פון טאַפליע: 162.7~164.0 mm (W) x 95.5~97.0 mm (H) [6.4055~6.4567 x 3.7598~3.8188 inches].
- Panel Thickness Range: 0.5~5 mm.
4. סעטאַפּ
4.1 Mounting the Text Panel
- Prepare a panel cutout according to the dimensions provided in Section 3.3 (Figure 3). Ensure the cutout is within the specified tolerance.
- Insert the TP04G-BL-CU into the cutout from the front.
- Secure the panel using the provided mounting hardware (e.g., screws and brackets, if included). Ensure a snug fit to maintain the IP66/NEMA4 waterproof rating for the front panel.
4.2 מאַכט קאַנעקשאַן
The TP04G-BL-CU can be powered in two ways:
- For Program Download: Connect the USB port to a PC. The PC will provide the necessary 5V power.
- For Normal Operation: Connect the RS-232 communication port to a PLC. The PLC should provide 5V DC power (1.7W Max.) through the RS-232 interface.
4.3 קאָמוניקאַציע קאַנעקשאַן
- RS-232 קאַנעקשאַן: Use a compatible RS-232 cable to connect the 9-pin D-SUB male port on the rear of the TP04G-BL-CU to your PLC. Ensure the cable is securely fastened.
- USB קשר: For program download and monitoring, connect a standard USB cable from the USB port on the rear of the panel to your PC.
5. אַפּערייטינג ינסטרוקטיאָנס
5.1 Powering On and Indicators
Once connected to a power source (PC via USB or PLC via RS-232), the green Power LED indicator will light up, indicating the unit is powered on. The red Alarm LED indicator will flash according to specific statuses:
- Flashes three times when connected with DVPACAB2A30P.
- Flashes with a buzzer sound when user-defined settings are matched.
- Indicates communication errors or other special conditions programmed by the user.
5.2 Using the Display and Keys
- ווייַז שטח: The LCM display will show the current program status, data, and messages as configured in the HMI program.
- נומעריק קיז (0-9): Use these keys to input numerical data. Their functions can also be customized within the HMI program.
- F שליסל: This is a user-definable function key. Its action depends on the HMI program loaded.
- ESC שליסל: Press to cancel an operation, exit a menu, or return to the previous screen.
- Enter Key (ENT): Press to confirm an input, accept a value, or execute a command.
- פײַל קנעפּלעך (אַרויף/אַראָפּ/לינקס/רעכטס):
- אַרויף אַראָפּ: Navigate through menus, increase/decrease numerical values, or scroll through pages.
- לינקס / רעכט: Move the cursor, select specific positions within a field, or navigate horizontally.
5.3 Backlight and Contrast Adjustment
- באַקלייט: The backlight has an automatic turn-off feature, configurable from 1 to 99 minutes. Setting it to '0' will keep the backlight continuously on. The backlight has a life span of approximately 50,000 hours at 25°C.
- קאַנטראַסט: The display contrast can be adjusted in 10 levels via the programming software to optimize readability.
5.4 Program Download and Monitoring
Programs for the TP04G-BL-CU are downloaded from a PC using a virtual COM port via the USB interface. This method also allows for monitoring the panel's operation.
6. וישאַלט
6.1 רייניקונג
To clean the front panel, use a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the display or casing. Ensure no liquid enters the device.
6.2 ינווייראַנמענאַל טנאָים
To ensure optimal performance and longevity, operate the TP04G-BL-CU within the specified environmental conditions:
- אַפּערייטינג טעמפּעראַטור: 0°C צו 50°C
- אַפּערייטינג הומידיטי: 20% צו 90% RH (ניט-קאַנדענסינג)
- סטאָרידזש טעמפּעראַטור: -20°C צו 60°C
The front panel has an IP66/NEMA4 waterproof rating, protecting it from dust and strong jets of water. However, the rear of the unit is not similarly protected and should be shielded from moisture and excessive dust.
7. טראָובלעשאָאָטינג
7.1 פראבלעמען מיט שטראָם און אַרויסווייַזונג
- קיין מאַכט LED: Check the power connection. Ensure the USB cable is properly connected to a powered PC, or the RS-232 cable is correctly connected to a PLC providing 5V DC.
- ליידיקע אויסשטעלונג: If the Power LED is on but the display is blank, check the backlight settings in the HMI program. Adjust contrast via software if the display is faint.
- Alarm LED Flashing: Refer to your HMI program documentation for specific alarm codes or conditions that trigger the red LED. Common causes include communication errors or user-defined events.
7.2 קאָמוניקאַציע פּראָבלעמען
- No Communication with PLC: Verify the RS-232 cable connection. Check the baud rate, data length, stop bits, and parity settings in both the HMI and PLC programs to ensure they match.
- Program Download Failure: Ensure the USB cable is securely connected and the correct virtual COM port is selected in the programming software. Check for driver installation issues on the PC.
7.3 צוריקשטעלן דעם מיטל
If the unit becomes unresponsive, locate the Reset key on the back panel and press it to restart the device. This may resolve temporary software glitches.
8. באַניצער עצות
No specific user tips are available from the provided data.
9. וואָראַנטי און שטיצן
For technical support, service, or warranty inquiries, please contact your authorized Delta distributor or visit the official Delta service webפּלאַץ בייַ SERVICE.DELTAWW.COM. Please have your product model (TP04G-BL-CU) and any relevant serial numbers ready when contacting support.
