Wiltec Pool Pump 18600 L/h User Manual

1. הקדמה

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Wiltec Pool Pump, model 65829. This pump is designed for circulating and filtering water in pools ranging from 74 to 110 cubic meters, offering a high flow rate of 18,600 liters per hour and a maximum head of 13 meters. It is compatible with sand filter systems and features an integrated pre-filter for enhanced protection.

פיגורע 1: Wiltec Pool Pump 18600 L/h in a typical pool setup. This image shows the pump connected to a pool system, highlighting its compact design and connection points.

2. זיכערקייַט אינפֿאָרמאַציע

Read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

• שטענדיק אָפּשטעקן די פּאָמפּע פֿון דער עלעקטריע צושטעל איידער איר דורכפֿירט יעדע וישאַלט אָדער רייניקונג.
• Ensure the electrical installation complies with local regulations and is protected by a Residual Current Device (RCD) with a tripping current not exceeding 30 mA.
• ניצ נישט די פּאָמפּע אויב דער עלעקטרישער שנור אדער פּלאָג איז געשעדיגט.
• The pump must be installed on a stable, level surface, protected from direct sunlight and adverse weather conditions.
• Ensure adequate ventilation around the pump motor to prevent overheating.
• This pump is designed for fresh water only, with a liquid temperature range of 0-35°C. Do not use with corrosive, flammable, or explosive liquids.

For detailed safety guidelines, please refer to the official Safety Information PDF document: זיכערקייַט אינפֿאָרמאַציע (PDF)

3. פּראָדוקט קאָמפּאָנענטן און דימענסיעס

The Wiltec Pool Pump consists of a robust motor, a pump housing with an integrated pre-filter, and inlet/outlet connections. Understanding the dimensions is crucial for proper installation and space planning.

פיגורע 2: Product Dimensions. This diagram illustrates the pump's overall length (580 mm), width (242 mm), and height (367 mm), along with specific measurements for connections and components.

די הויפּט קאַמפּאָונאַנץ אַרייַננעמען:

• פאַר-פילטער קאָרב: Located at the inlet, designed to capture debris larger than 3.9 mm.
• מאָטאָר: 750W copper-wound motor with thermal overload protection.
• פּאָמפּע האָוסינג: דוראַבאַל פּלאַסטיק קאַנסטראַקשאַן.
• אַרייַנגאַנג / אָוטלעט: Standard connections for pool hoses.

4. סעטאַפּ און ייַנמאָנטירונג

Proper installation is vital for the pump's performance and longevity. It is recommended that installation be performed by a qualified technician.

1. אָרט: Position the pump on a firm, level surface as close to the pool as possible to minimize suction lift. Ensure it is below the water level if possible for self-priming.
2. מאָונטינג: Secure the pump to the surface using appropriate fasteners to prevent vibration and movement.
3. גערער קאַנעקשאַנז: Connect the pump's inlet to the pool skimmer/main drain line and the outlet to the sand filter and return lines. Ensure all connections are watertight using thread sealant tape or appropriate gaskets.
4. עלעקטריקאַל קשר: Connect the pump to a dedicated, properly grounded electrical circuit protected by an RCD. Verify that the power supply voltage matches the pump's requirements (230V, 50Hz).
5. פּרימינג: Before first use, fill the pre-filter housing with water to ensure the pump is primed. This prevents dry running and potential damage.

5. אַפּערייטינג ינסטרוקטיאָנס

Once installed and primed, the pump is ready for operation.

1. אָנהייב די פּאָמפּע: Ensure all valves are open and the pre-filter is full of water. Connect the pump to the power supply. The pump will start circulating water.
2. מאָניטאָרינג פאָרשטעלונג: Observe the water flow and pressure gauge (if installed on your filter system) to ensure optimal operation. The pump is designed for a maximum flow rate of 18,600 L/h and a maximum head of 13 meters.
3. טעמפּעראַטור קייט: The pump is designed to operate with liquid temperatures between 0°C and 35°C. Operating outside this range may damage the pump.
4. אפשטעלן די פאמפ: Disconnect the pump from the power supply. Close any necessary valves to prevent water backflow.

פיגורע 3: Optimal Performance. This image highlights the pump's maximum head of 13 meters and maximum flow rate of 18,600 L/h, along with the recommended liquid temperature range of 0-35°C.

6. וישאַלט

רעגולערע אויפהאלטונג גאראנטירט די לאנגעוויטי און עפעקטיווע אפעראציע פון ​​אייער בעקן פאמפ.

• פאַר-פילטער רייניקונג: The integrated pre-filter collects debris such as leaves, twigs, gravel, and hair. Regularly inspect and clean the pre-filter basket to maintain optimal flow and prevent pump strain. To clean, disconnect power, open the pre-filter lid, remove the basket, empty debris, and rinse thoroughly. Reassemble, ensuring the O-ring is properly seated and the lid is securely tightened.


פיגורע 4: Pre-filter Function. This image demonstrates how the pump's pre-filter effectively captures various types of debris, such as leaves, twigs, gravel, and hair, protecting the pump's internal components.

• מאָטאָר דורכקוק: Periodically check the motor for any unusual noises or excessive heat. The copper-wound motor is designed for stable operation and includes thermal overload protection.


פיגורע 5: Robust Motor Design. This image provides a view of the pump's copper-wound motor, emphasizing its stable operation and built-in protection against overheating and overload.

• אַלגעמיינע רייניקונג: Keep the exterior of the pump clean and free from dirt and debris.
• ווינטעריזאַטיאָן: In regions with freezing temperatures, drain the pump completely and store it in a dry, frost-free location during the off-season to prevent damage.

7. טראָובלעשאָאָטינג

אויב איר טרעפט פּראָבלעמען מיט אייער פּאָמפּע, זעט די פאלגענדע געוויינטלעכע פּראָבלעמען און לייזונגען:

If problems persist after attempting these solutions, contact a qualified service technician or Wiltec customer support.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

פֿאַר וואָראַנטי אינפֿאָרמאַציע, טעכנישע שטיצע, אָדער סערוויס פֿראַגעס, ביטע קאָנטאַקט דיין הענדלער אָדער דעם פאַבריקאַנט גלייך. האַלט דיין קויף קוויטל ווי אַ באַווייַז פֿון קויף.

A Certificate of Conformity is available for this product: Certificate of Conformity (PDF)