Pipishell Electric Power Recliner Chair

1. הקדמה

This manual provides instructions for the assembly, operation, and maintenance of your Pipishell Electric Power Recliner Chair, Model MSSS10GN-US. Please read this manual thoroughly before use to ensure proper function and longevity of your product.

Figure 1: Pipishell Electric Power Recliner Chair (Green)

2. פּראָדוקט פֿעיִקייטן

• Infinite Reclining System: The backrest adjusts smoothly from 105° to 150°, and the footrest from 0° to 90°, allowing for continuous, personalized positioning.
• Comfort Materials: Constructed with high-density foam, plush cotton padding, and independent springs for support and durability. The chair is upholstered in soft chenille fabric.
• Spacious Seating: Features a 19.7-inch wide seat and extends to 62.6 inches when fully reclined, accommodating various body types.
• רימאָוט קאָנטראָל אָפּעראַציע: An electric remote control provides easy adjustment of the recline and footrest. The remote includes a retractable cord and can be stored in a side pocket.
• סטאַביל קאַנסטראַקשאַן: Built with a solid steel frame, reinforced seat, and independent springs for long-term stability and support.

Figure 2: Internal Cushion Structure

Figure 3: Seating and Footrest Comparison

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן צו פֿאַרזאַמלען:

• באַקרעסט
• Arm Pads (Left and Right)
• אַוועקזעצן באַזע
• ווייַט קאָנטראָל
• מאַכט אַדאַפּטער
• Hardware Pack (screws, tools)

4. אַסעמבלי אינסטרוקציעס

Assembly of the Pipishell Electric Power Recliner Chair typically takes approximately 15 minutes and requires minimal tools. Follow the steps below:

1. אויספּאַקן אַלע קאָמפּאָנענטן און לייגן זיי אויס אויף אַ ריינער, ווייכער ייבערפלאַך צו פאַרמייַדן שעדיקן.
2. Attach the backrest to the seat base by aligning the metal brackets and sliding them into place until they lock securely.
3. Connect the power cable from the backrest to the corresponding cable on the seat base.
4. Attach the arm pads to the sides of the chair, ensuring they are firmly secured.
5. Connect the remote control cable to the designated port on the chair.
6. Plug the power adapter into the chair and then into a wall outlet.

For a visual guide, please refer to the assembly portion of the product video:

5. אַפּערייטינג ינסטרוקטיאָנס

The recliner chair is operated using the wired remote control. The remote allows for smooth, stepless adjustment of the backrest and footrest.

• Recline Backrest / Extend Footrest: Press and hold the 'Recline' button (usually indicated by an upward arrow or a reclining figure) to smoothly recline the backrest and extend the footrest. Release the button at your desired position.
• Return to Upright Position / Retract Footrest: Press and hold the 'Upright' button (usually indicated by a downward arrow or an upright figure) to return the chair to its original upright position and retract the footrest. Release the button at your desired position.
• Stopping at Any Position: The stepless mechanism allows you to stop the recline or return motion at any point by releasinג דעם קנעפּל.

Figure 4: Remote Control for Reclining

Figure 5: Seamless Recline for Comfort

The remote control can be conveniently stored in the side pockets of the chair when not in use.

6. וישאַלט

To maintain the appearance and functionality of your recliner chair, follow these care instructions:

• רייניקונג: אָרט ריין קיין ספּילז אָדער סטאַינס מיד מיט אַדamp שטאָף און מילד וואַשפּולווער. ויסמיידן האַרב קעמיקאַלז.
• אַלגעמיינע זאָרגן: Wipe clean the fabric regularly to remove dust and debris.
• מעקאַניזאַם: Periodically check all connections and moving parts to ensure they are secure and free from obstruction. Do not lubricate the reclining mechanism unless specifically instructed by customer support.

7. טראָובלעשאָאָטינג

If you encounter any issues with your recliner chair, please refer to the following common troubleshooting steps:

• Chair Not Reclining:
  • Ensure the power adapter is securely plugged into both the chair and a working wall outlet.
  • Check the remote control cable connection to the chair.
  • Verify that there are no obstructions preventing the mechanism from moving.
• ומגעוויינטלעך נויזיז:
  • Check for loose hardware and tighten if necessary.
  • Ensure no objects are caught in the reclining mechanism.
• רימאָוט קאָנטראָל ניט ריספּאַנדינג:
  • Confirm the power supply is active.
  • Inspect the remote control cable for any damage.

אויב די טריט לייזן נישט דעם פראבלעם, ביטע קאנטאקטירט קאסטומער סופארט פאר ווייטערדיגע הילף.

8. ספּעסאַפאַקיישאַנז

פיגור 6: פּראָדוקט דימענסיעס און וואָג קאַפּאַציטעט

9. וואָראַנטי און שטיצן

For warranty information or technical support, please contact Pipishell customer service. Keep your purchase receipt and model number (MSSS10GN-US) handy for faster service.

קאָנטאַקט אינפֿאָרמאַציע קען טיפּיש געפֿונען ווערן אויף דער פאַבריקאַנט'ס webוועבזייטל אדער דורך אייער הענדלער.