1. איבערview
The Klein Tools 33809M Grab-And-Go Metric Impact Socket Set is designed for professionals requiring durable and efficient fastening solutions. This 10-piece set includes nine common metric socket sizes (8 mm to 19 mm) and a 1/4-inch impact adapter, all crafted from cold-forged, heat-treated Chrome Molybdenum (Cr-Mo) steel for maximum durability under high torque applications. The sockets feature industry-standard color-coded rings and bold stamped markings for quick size identification. The included sleeve and carabiner allow for convenient transport and quick access on the job site.
2. וואָס איז אַרייַנגערעכנט
Your Klein Tools 33809M Grab-And-Go Metric Impact Socket Set includes the following components:
- 9 Metric Impact Sockets: Sizes 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 18 mm, and 19 mm. Each socket is color-coded for easy identification.
- 1/4-Inch Impact Adapter: Allows the sockets to be used with a 1/4-inch impact driver.
- Socket Sleeve/Holder: A durable holder designed to securely retain all sockets and the impact adapter.
- קאַראַבינער: For attaching the socket sleeve to tool bags, belts, or backpacks.
3. סעטאַפּ
Follow these steps to prepare your socket set for use:
- Attach Sockets to Impact Adapter: Select the desired metric socket. Align the square drive opening of the socket with the square drive end of the 1/4-inch impact adapter. Push the socket firmly onto the adapter until it clicks into place, ensuring a secure connection.
- Connect to Impact Driver: Insert the hex shank of the 1/4-inch impact adapter (with attached socket) into the chuck of your 1/4-inch impact driver. Ensure the adapter is fully seated and locked into the chuck.
- Secure the Socket Sleeve: Use the provided carabiner to attach the socket sleeve to your tool belt, backpack, or tool bag. This allows for convenient and quick access to your sockets while working.
4. אַפּערייטינג ינסטרוקטיאָנס
Using your Klein Tools Grab-And-Go Metric Impact Socket Set is straightforward:
- Select Correct Socket Size: Identify the required metric size for your fastener. The sockets feature color-coded rings and bold stamped markings for quick and easy size identification.
- צוטשעפּען סאָקעט: As described in the Setup section, attach the selected socket to the 1/4-inch impact adapter, then secure the adapter in your impact driver.
- אײַנשטעלן פאַסטער: Place the socket squarely onto the fastener head, ensuring a full and secure engagement. Avoid angled engagement, which can lead to stripping the fastener or damaging the socket.
- Operate Impact Driver: Activate your impact driver to loosen or tighten the fastener. Apply steady pressure and allow the impact mechanism to do the work.
- אַראָפּנעמען סאָקעט: After use, carefully remove the socket from the fastener and then from the impact adapter. Return the socket to its designated slot in the sleeve for organized storage.
5. וישאַלט
Proper maintenance ensures the longevity and optimal performance of your Klein Tools socket set:
- רייניקונג: After each use, wipe down sockets and the adapter with a clean, dry cloth to remove dirt, grease, or debris. For stubborn grime, a mild solvent or degreaser can be used, followed by thorough drying.
- סטאָרידזש: Always store the sockets in their designated slots within the provided sleeve. This keeps them organized, protected from loss, and prevents damage. Store the set in a dry environment to prevent rust.
- דורכקוק: Periodically inspect sockets and the adapter for any signs of wear, cracks, or damage. Discontinue use of any damaged components to prevent injury or further tool damage.
6. טראָובלעשאָאָטינג
דאָ זענען לייזונגען צו געוויינטלעכע פּראָבלעמען וואָס איר קענט באַגעגענען:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Socket difficult to remove from sleeve. | Sleeve designed for secure retention. | Apply firm, even pressure to pull the socket out. The secure fit prevents accidental loss. |
| Socket not fitting fastener. | Incorrect size selected or fastener is damaged. | Verify the fastener's size and ensure you are using the corresponding metric socket. Do not force the socket onto the fastener. |
| Socket slipping on fastener. | Socket not fully seated on fastener or adapter, or fastener is stripped. | Ensure the socket is fully engaged with the fastener and securely attached to the impact adapter. If the fastener is stripped, alternative removal methods may be required. |
7. ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל נומער | 33809 ם |
| סאָרט | קליין מכשירים |
| נומער פון פּיעסעס | 10 (9 sockets, 1 adapter) |
| כאָלעל סיזעס | 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 18 mm, 19 mm |
| דרייוו סיסטעם | Hex (for impact adapter) |
| ביט קאָמפּאַטיביליטיעס | 1/4-inch impact driver |
| מאַטעריאַל | Chrome Molybdenum Steel (Cr-Mo) |
| ענדיקן טיפּ | פּאַינטעד |
| נומער לענג | 8.61 inches (overall sleeve length) |
| פּונקט וואָג | 1.3 פונט |
| UPC | 092644380358 |
8. וואָראַנטי און שטיצן
Klein Tools has a long-standing reputation for manufacturing high-quality, professional-grade hand tools. This product is designed to deliver performance, durability, and precision. For specific warranty information, product support, or to inquire about replacement parts, please refer to the official Klein Tools webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך. האלט אייער קויף קוויטל פאר גאראנטיע טענות.
קאָנטאַקט אינפֿאָרמאַציע:
- Webפּלאַץ: www.kleintools.com
- קונה סערוויס: אָפּשיקן צו די webזייטל פֿאַר רעגיאָנאַלע קאָנטאַקט דעטאַילס.