DATOUBOSS 12v300Ah

DATOUBOSS LiFePO4 Battery 12V 300Ah User Manual

Model: 12v300Ah | Brand: DATOUBOSS

1. פּראָדוקט איבערview

The DATOUBOSS 12V 300Ah LiFePO4 Battery is a deep-cycle lithium iron phosphate battery designed for reliable energy storage. It is suitable for various applications including solar power systems, recreational vehicles (RVs), camping setups, and off-grid power solutions. This battery offers a stable power output, high energy efficiency, and a long cycle life, making it an effective alternative to traditional lead-acid batteries.

שליסל פֿעיִקייטן:

  • הויך קאַפּאַציטעט: 12V 300Ah with 3840Wh usable energy, providing substantial power for extended use.
  • לאנג ציקל לעבן: Offers 6000+ cycles at 80% Depth of Discharge (DOD), ensuring a lifespan of up to 10 years.
  • אינטעגרירטע בי-עם-עס: Features a 200A Battery Management System (BMS) for protection against overcharge, over-discharge, overcurrent, short circuit, and temperature fluctuations.
  • לייטווייט פּלאַן: Weighs approximately 27.7 kg (60.9 lbs), significantly lighter than comparable lead-acid batteries, facilitating easier installation and transport.
  • Scalable System: Supports configurations up to 4P4S (4 parallel, 4 series) for increased capacity and voltagE באדערפענישן.
  • דוראַבאַל קאַנסטראַקשאַן: Built with automotive-grade LiFePO4 cells and features an IP65 rated sealed housing for protection against dust and water ingress.
DATOUBOSS 12V 300Ah LiFePO4 Battery with dimensions and key specifications
Figure 1: DATOUBOSS 12V 300Ah LiFePO4 Battery showing dimensions (50cm x 22cm x 25cm) and key specifications like 3840Wh usable energy, 300A max continuous discharge, 3840W max load power, and IP65 waterproof/dustproof rating. M8 terminal bolts are also shown.
אינערלעכער view of DATOUBOSS LiFePO4 battery highlighting BMS protections
Figure 2: Internal structure of the LiFePO4 battery, illustrating the Grade A cells and BMS protection features including cell balancing, overcharge, over-discharged, short-circuit, over-current, and high/low temperature protection.

2. זיכערקייַט אינפֿאָרמאַציע

Read and understand all safety instructions before installing or operating the battery. Failure to follow these instructions may result in electric shock, fire, or other serious injury or damage.

  • ויסמיידן קורץ קרייַז: Do not short-circuit the positive and negative terminals. This can cause severe damage to the battery and pose a fire hazard.
  • No Modification or Disassembly: Do not modify or disassemble the battery without authorization. Unauthorized modifications can compromise safety and void the warranty.
  • Fire and Water: Do not expose the battery to fire or water. The battery is IP65 rated for dust and splash resistance, but not for submersion.
  • טשאַרדזשינג: ניצט שטענדיק אַ נאָרמאַלן טשאַרדזשער וואָס פּאַסט צו דער אַרויסגאַנג וואָלומעןtage and chemistry of the lithium battery. Using an incompatible charger can damage the battery or lead to unsafe conditions.
  • אַפּפּליקאַטיאָן: This battery is designed for deep-cycle energy storage applications. It is ניט בדעה for engine starting or cranking applications.
  • ווענטילאַטיאָן: Ensure adequate ventilation around the battery during operation and charging to prevent heat buildup.
  • טעמפּעראַטור: Operate and store the battery within the specified temperature ranges (Charge Temp: 0°C ~ 45°C, Discharge Temp: -20°C ~ 65°C).

3. וואָס איז אין דער קעסטל

ביים עפענען דעם פּעקל, קאָנטראָלירט אַז אַלע קאָמפּאָנענטן זענען פאַראַן און נישט געשעדיגט.

  • 1x DATOUBOSS 12.8V 300Ah Deep-Cycle Lithium Iron Phosphate Battery (Core Series)
  • 1x באַניצער מאַנואַל (דאָס דאָקומענט)
  • 2x איזאָלירנדיקע אַרבל
  • 2x M8 Long Terminal Bolts
Contents of the DATOUBOSS 12V 300Ah LiFePO4 Battery package
Figure 3: Package contents including the 12.8V 300Ah battery, user manual, insulating sleeves, and M8 terminal bolts.

Video 1: Unboxing and initial inspection of the DATOUBOSS 12V 300Ah LiFePO4 Battery, demonstrating its physical characteristics and included accessories.

4. סעטאַפּ און ייַנמאָנטירונג

Proper installation is crucial for the safe and efficient operation of your LiFePO4 battery. Always ensure all connections are secure and correctly polarized.

4.1 Connecting Multiple Batteries (4P4S Configuration)

The DATOUBOSS 12V 300Ah battery supports scalable configurations up to 4 parallel and 4 series (4P4S) to meet higher capacity or voltage requirements. This allows for a maximum system capacity of 61.44 kWh.

  • פּאַראַלעל קשר: Connect positive terminals to positive terminals and negative terminals to negative terminals to increase overall capacity (Ah) while maintaining the same voltagE (V).
  • סעריע קשר: Connect the positive terminal of one battery to the negative terminal of the next battery to increase overall voltage (V) בשעת'ן אויפהאלטן די זעלבע קאפאציטעט (Ah).
  • Combined (Series-Parallel): For 4P4S, first connect batteries in parallel to achieve desired capacity, then connect these parallel strings in series to achieve desired voltage.
  • וויכטיק: Ensure all batteries in a series or parallel bank are of the same type, capacity, and voltage. Use appropriate cables and fuses for all connections.
Diagram illustrating 4P4S battery connection for increased power
פיגורע 4: עקסample diagram of a 4P4S battery configuration, showing how multiple batteries can be connected to achieve higher voltage and capacity, up to 61.44 kWh.

4.2 System Integration (Solar/RV)

The battery can be integrated into various energy systems. A typical setup for solar or RV applications involves a solar panel, an MPPT charge controller, the battery, and an inverter to power AC loads.

Diagram of a convenient energy storage solution for RVs with solar panel, MPPT, battery, and inverter
Figure 5: A typical RV energy storage system diagram, showing the connection flow from solar panel to MPPT controller, then to the battery, and finally through an inverter to various loads.
Diagram of a household solar energy storage system
Figure 6: Illustration of a household solar energy system, demonstrating how solar panels charge the lithium battery pack via an MPPT controller, and an inverter converts DC power to AC for household electricity consumption.

5. אַפּערייטינג ינסטרוקטיאָנס

The DATOUBOSS LiFePO4 battery is designed for ease of use in various deep-cycle applications.

5.1 טשאַרדזשינג די באַטאַרייע

The battery can be charged using several methods:

  • Lithium Battery Charger: Use a dedicated LiFePO4 battery charger with compatible voltagE און קראַנט סעטטינגס.
  • זונ פּאַנעל: Connect to a solar panel system via an MPPT (Maximum Power Point Tracking) charge controller.
  • גענעראַטאָר: Use a generator with an appropriate charging system or AC output connected to a compatible charger.
Three ways to charge the DATOUBOSS LiFePO4 battery
Figure 7: Visual representation of three common charging methods: a dedicated lithium battery charger, solar panels, and a generator.

5.2 טיפּיש אַפּפּליקאַטיאָנס

This battery is versatile and can power a wide range of devices and systems:

  • RV and Campינג: Power appliances like air conditioners, coffee makers, refrigerators, and fans during travel or outdoor activities.
  • Solar Energy Storage: Store excess solar energy for use during nighttime or cloudy days, enhancing energy independence.
  • היים נויטפאַל באַקאַפּ: Provide backup power for essential household items during power outages.
  • Marine (Boat/Trolling Motor): Suitable for powering trolling motors and other marine electronics.
  • זיכערהייט סיסטעמען: Can be used as a reliable power source for security cameras and other surveillance equipment.
דאַטובאָסס ליפֿעפּאָ4 באַטעריע וואָס מאַכט געטריבן פֿאַרשידענע אַפּלייאַנסעס אין אַן RV סעטינג
Figure 8: An RV setup demonstrating the battery's capability to power an air conditioner (1000W for 3.8H), coffee maker (800W for 4.8H), refrigerator (150W for 25.6H), and fan (100W for 38.4H).
Various applications of the DATOUBOSS LiFePO4 battery
פיגורע 9: עקסamples of wide applications including RVs, solar energy storage for homes, home emergency backup, boats, and camping.

6. וישאַלט

LiFePO4 batteries require minimal maintenance compared to lead-acid batteries, but following these guidelines will ensure optimal performance and longevity:

  • רעגולער דורכקוק: Periodically check the battery terminals for corrosion or loose connections. Clean terminals with a wire brush if necessary and ensure they are tightened securely.
  • האַלטן ריין און טרוקן: While the battery has an IP65 rating, it is best to keep it clean and dry. Avoid exposing it to excessive moisture or dust.
  • טעמפּעראַטור פאַרוואַלטונג: Operate and store the battery within the recommended temperature ranges. Extreme temperatures can affect performance and lifespan. The integrated BMS provides protection against high and low temperatures.
  • טשאַרדזשינג פּראַקטיסיז: Avoid consistently deep discharging the battery to 0% state of charge. While LiFePO4 batteries tolerate deep cycles well, maintaining a higher average state of charge can extend overall life.
  • סטאָרידזש: If storing the battery for an extended period, ensure it is charged to approximately 50-70% of its capacity and stored in a cool, dry place.

7. טראָובלעשאָאָטינג

The integrated Battery Management System (BMS) provides comprehensive protection. If you encounter issues, consider the following common scenarios:

פּראָסט ישוז און סאַלושאַנז:

  • באַטאַרייע ניט טשאַרדזשינג:
    • Check all connections to the charger and battery terminals for looseness or corrosion.
    • Ensure the charger is compatible with LiFePO4 batteries and is functioning correctly.
    • Verify that the input power source to the charger is active.
    • The BMS may have activated over-discharge protection. Try connecting to a compatible charger to reset.
  • קיין מאַכט רעזולטאַט:
    • קוק די באַטאַרייע וואָלtage. If it's too low, the BMS may have activated over-discharge protection.
    • Inspect all load connections and ensure they are secure.
    • The BMS may have activated overcurrent or short-circuit protection. Disconnect the load, wait a few minutes, and reconnect. Reduce the load if it was excessive.
    • Check for any blown fuses in your system.
  • Battery Overheating:
    • The BMS includes temperature protection. If the battery becomes excessively hot, it will shut down.
    • זיכער מאַכן אַז עס איז גענוג ווענטילאַציע אַרום דער באַטאַרייע.
    • Reduce the load or charging current if the battery is consistently overheating.
Diagram detailing BMS protection features
פיגורע 10: דעטאַילעד view of the BMS protection mechanisms, including protection against overloading, overdischarge, temperature, short circuits, overcurrent, and overvoltage.

If these steps do not resolve the issue, please contact DATOUBOSS customer support for further assistance.

8. ספּעסאַפאַקיישאַנז

אַטריביוטבאַשרייַבונג
סאָרטDATOUBOSS
מאָדעל12v300Ah
נאָמינאַל חלקtage12.8 וואלטס
נאָמינאַל קאַפּאַציטעט300 אַה
ניצלעך ענערגיע3840ווה
מאַקס. קעסיידערדיק אָפּזאָגן קראַנט300 א
מאַקס. מאַסע מאַכט3840 וו
ציקל לעבן6000+ Cycles at 80% DOD (up to 15000 cycles)
באַטערי טיפּLiFePO4 (ליטהיום אייַזן פאָספאַטע)
BMS פּראַטעקשאַן200A (Overcharge, Over-discharge, Overcurrent, Short Circuit, Temperature)
ינגרעסס פּראַטעקשאַן (IP) שאַץIP65 (וואַסערפּרוף און שטויבפּרוף)
דימענסיעס (L X W X H)19.69 X 10.24 X 8.66 אינטשעס (50 X 26 X 22 סענטימעטער)
פּונקט וואָג60.9 פונט (27.7 קג)
אַפּערייטינג טעמפּעראַטור (טשאַרדזש)0 °C ~ 45 °C
אַפּערייטינג טעמפּעראַטור (אָפּזאָגן)-20°C ~ 65°C
Max. System Configuration4P4S

9. וואָראַנטי און שטיצן

For warranty information, technical support, or any questions regarding your DATOUBOSS LiFePO4 battery, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact details.

פאַבריקאַנט: דאַטובאָס

Seller: Henan Zhongri New Energy Co., Ltd.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.