ECOELER YDM003 Single Pole Digital Dimmer Switch User Manual

הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER YDM003 Single Pole Digital Dimmer Switch. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

זיכערקייַט אינפֿאָרמאַציע

• ווארענונג: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring.
• די אינסטאַלאַציע מוז דורכגעפירט ווערן דורך אַ קוואַליפֿיצירטן עלעקטריקער אָדער לויט די לאָקאַלע עלעקטרישע קאָודן.
• This dimmer switch is for single-pole applications only. Do not use in 3-way or 4-way circuits.
• A neutral wire is REQUIRED for this device to function. Ensure your electrical box has a neutral wire (usually white) before installation.
• Do not use with smart bulbs.
• דו זאלסט נישט יקסיד די מאַקסימום וואַסערtage ratings: 150W for dimmable LED/CFL bulbs, 300W for incandescent/halogen bulbs.

וואָס איז אין די קעסטל

• 1 x ECOELER YDM003 Digital Dimmer Light Switch
• קסנומקס רענטגענ וואנט פּלאַטע
• ינסטאַלירונג אינסטרוקציעס
• מאַונטינג סקרוז

סעטאַפּ און ינסטאַלירונג

1. קער אַוועק מאַכט: Before starting, ensure power is OFF at the circuit breaker or fuse box to prevent electrical shock.
2. באַשטעטיקן וויירינג:

   Confirm that your electrical box contains a neutral wire (typically white). This dimmer requires a neutral wire for proper operation. Identify the Hot (Line), Load, Ground, and Neutral wires.

   

   Image: Wiring diagram for the ECOELER dimmer switch, illustrating connections for Hot (black), Load (red), Ground (green), and Neutral (white) wires. The diagram emphasizes that a neutral wire is required.

3. דראָט קאַנעקשאַנז:
   • פאַרבינדן די Hot (Line) wire from the wall box to the dimmer's black wire.
   • פאַרבינדן די מאַסע wire (to the light fixture) from the wall box to the dimmer's red wire.
   • פאַרבינדן די ערד wire from the wall box to the dimmer's green wire.
   • פאַרבינדן די נייטראַל wire from the wall box to the dimmer's white wire.
   • זיכערן אַלע קאַנעקשאַנז מיט דראָט ניסלעך.
   

   Image: A detailed diagram showing the ECOELER dimmer switch connected to a single-pole circuit. It clearly labels the Hot (black), Load (red), Ground (green), and Neutral (white) wires, emphasizing the neutral wire requirement.

4. בארג די דימער: Carefully fold the wires and push the dimmer into the wall box. Secure it with the provided screws.
5. ינסטאַלירן וואנט פּלאַטע: Attach the decorative wall plate over the dimmer switch.
6. ומקערן מאַכט: צינדט צוריק אן די מאַכט ביים קרייז ברעיקער.

אַפּערייטינג ינסטראַקשאַנז

הויפּט קאָנטראָלס

בילד: אן עקספלאדירטע view diagram of the ECOELER dimmer switch, highlighting its main components: the Dim/Brighten buttons, the ON/OFF button, the LED indicators for brightness level, and the hidden trim dial for adjustment.

• ON/OFF קנעפּל: Press the large paddle switch to turn lights ON or OFF.
• Dim/Brighten Buttons: Use the small up (▲) and down (▼) buttons to adjust the brightness level. There are 13 dimming levels.
• LED ינדיקאַטאָרס: The 7 LED lights indicate the current brightness level.
• וועלקן אויף / אַוועק: Lights will gradually illuminate or dim to protect your eyes and extend bulb lifespan. The lowest LED indicator remains softly lit for easy location in the dark.

Minimum Brightness Adjustment (Trim Dial)

The trim dial allows you to set the minimum brightness level to prevent flickering or premature turn-off at low settings, especially with certain LED bulbs.

Image: A visual guide demonstrating how to adjust the minimum brightness using the trim dial. It shows removing the rocker cover, locating the dial, and turning it clockwise for brighter minimum or counter-clockwise for less bright minimum.

1. Turn on the dimmer and adjust it to the lowest setting using the down (▼) button.
2. Carefully remove the rocker cover (the large paddle switch) to expose the trim dial.
3. Use a small screwdriver to rotate the "Trim Dial".
   • Turn clockwise (+) to increase the minimum brightness.
   • Turn counter-clockwise (-) to decrease the minimum brightness.
   Adjust until the preferred lowest light level is achieved without flickering.
4. Replace the rocker cover.

קאַמפּאַטאַבילאַטי

The ECOELER YDM003 dimmer switch is designed for wide compatibility with various bulb types:

• Dimmable LED bulbs up to 150W
• Dimmable CFL bulbs up to 150W
• Incandescent or Halogen bulbs up to 300W

וויכטיק: This dimmer is NOT compatible with smart bulbs. Ensure your bulbs are explicitly labeled as "dimmable" for optimal performance.

Image: The ECOELER dimmer switch displayed next to illustrations of compatible bulb types: 150W/120V Dimmable LED Lamp, 150W/120V CFL Lamp, and 300W/120V Incandescent Lamp.

וישאַלט

• To clean the dimmer switch and wall plate, wipe with a soft, damp שטאָף. דו זאלסט נישט נוצן אַברייסיוו קלינערז אָדער סאָלוואַנץ.
• זיכער מאַכן אַז די מאַכט איז אויסגעלאָשן בײַם קרייַז ברעאַקער איידער רייניקונג.
• Periodically check for loose connections or signs of wear. If any issues are found, consult a qualified electrician.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

ECOELER provides a one-year limited warranty against manufacturing defects under normal use. Replacement or refund services are available. For support or warranty claims, please contact the seller via Amazon.

For additional information or assistance, visit the ECOELER Store on Amazon.