USX MOUNT XTL908 Heavy Duty Tilting TV Wall Mount Instruction Manual

1. פּראָדוקט איבערview

The USX MOUNT XTL908 is a heavy-duty tilting TV wall mount designed for large televisions ranging from 60 to 120 inches. It supports TVs weighing up to 220 lbs and features a low-profile design, positioning the TV just 2.6 inches from the wall. The mount is compatible with VESA patterns up to 900x600mm and can be installed on wood studs (16-32 inches apart), concrete, or brick walls.

Image 1.1: The USX MOUNT XTL908 TV Wall Mount installed in a modern living room setting.

Image 1.2: The ultra-slim profile of the mount, showing the TV positioned close to the wall.

2. זיכערקייַט אינפֿאָרמאַציע

Read all instructions carefully before installation. If you have any questions, consult a qualified installer. Improper installation can result in serious injury or damage.

• וואָג קאַפּאַציטעט: Do not exceed the maximum weight capacity of 220 lbs (100 kg). This mount is intended for use only with the maximum weights indicated.
• טעלעוויזיע גרייס: די מאָונט איז דיזיינד פֿאַר טעלעוויזאָרס צווישן 60 און 120 אינטשעס.
• וואַנט טיפּ: Install only on wood studs, solid concrete, or brick walls. טאָן ניט install on drywall alone.
• Stud Spacing: Ensure wood studs are spaced between 16 and 32 inches apart.
• מאַונטינג ייַזנוואַרג: Use only the provided mounting hardware. If you require concrete anchors, please contact customer support.
• Integrity Test: After installation, perform an integrity test by gently pulling on the mount to ensure it is securely fastened to the wall.

Image 2.1: The robust construction of the mount, designed to securely hold TVs up to 220 lbs.

3. פּעקל אינהאַלט

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact customer support.

• וואַנט פּלאַטע פֿאַרזאַמלונג
• טעלעוויזיע בראַקאַץ (2)
• Mounting Hardware Kit (screws, washers, spacers, anchors for concrete/brick)
• מאָונטינג מוסטער
• ינסטראַקשאַנז מאַנואַל

4. ספּעסאַפאַקיישאַנז

Image 4.1: Visual representation of VESA patterns supported and the maximum load capacity of 220 lbs.

Image 4.2: Technical drawing showing the dimensions of the TV interface and wall plate.

בילד 4.3: נאך איינס view of the product dimensions, highlighting key measurements.

5. סעטאַפּ און ייַנמאָנטירונג

Before you begin, ensure you have all necessary tools and that your wall type is suitable for this mount. The installation video below provides a visual guide.

5.1 פאַר-ינסטאַלירונג טשעקס

• באַשטעטיקן טעלעוויזיע קאָמפּאַטאַביליטי: Check your TV's weight and VESA mounting pattern to ensure it falls within the mount's specifications (60-120 inches, up to 220 lbs, VESA up to 900x600mm).
• ידענטיפיצירן וואנט טיפּ: Determine if your wall is wood stud, solid concrete, or brick.

Image 5.2: The mount is suitable for wood studs (16-32" spacing), solid concrete, and brick walls. Not for drywall alone.

5.2 אנשטעלן טעלעוויזיע קלאַמערן

Depending on your TV's back, choose the appropriate option:

1. For Flat TV Back: Align the TV brackets with the VESA holes on the back of your TV. Secure them using the appropriate screws and washers from the hardware kit. Do not overtighten.
2. For Irregular TV Back: If your TV has an irregular or curved back, use the provided spacers to create a flat mounting surface before attaching the brackets.

5.3 מאָנטירן די וואַנט פּלאַטע

Use the provided mounting template to mark the drill holes on your wall. Ensure the template is level before marking.

• פֿאַר האָלץ שטיפטן: Locate the center of your wood studs. Drill pilot holes (7/32 in. / 5.5mm diameter, 2.5 in. / 64mm depth). Secure the wall plate using lag bolts and washers. Do not use plastic anchors for wood studs.
• פֿאַר בעטאָן/ציגל ווענט: Drill pilot holes (3/8 in. / 10mm diameter, 2.5 in. / 64mm depth). Insert concrete anchors into the drilled holes. Secure the wall plate using lag bolts and washers.

After securing the wall plate, perform an integrity test by pulling on the mount to ensure it is firmly attached to the wall.

Image 5.3: Simplified 3-step installation process: 1. Attach TV brackets, 2. Mount wall plate, 3. Hang up TV.

5.4 Hanging and Securing the TV

1. Carefully lift the TV with the attached brackets and hook them onto the top edge of the wall plate.
2. לאָזט דעם טעלעוויזאָר פֿאָרזיכטיק אַראָפּ ביז די קלאַמערן גייען גאָר אַרײַן אין דער וואַנט־פּלאַטע.
3. Use the quick lock and release pull tabs to secure the TV to the wall plate, preventing accidental dislodgement.

6. אַפּערייטינג ינסטרוקטיאָנס

6.1 Adjusting Tilt Angle

The USX MOUNT XTL908 allows for easy tilt adjustment to optimize your viewing angle and reduce glare. The mount can tilt 5 degrees upwards and 12 degrees downwards.

• To adjust the tilt, loosen the tilting adjustment knobs located on the TV brackets.
• טילט די טעלעוויזיע צו דיין געוואלט ווינקל.
• Tighten the tilting adjustment knobs to secure the TV in place.

Image 6.1: The tilt function allows for easy adjustment up to +5° and down to -12° to reduce glare.

Image 6.2: The mount's tilt range for optimal viewפון פאַרשידענע שטעלעס.

6.2 Quick Lock and Release

The mount features pull tabs for easy locking and releasing of the TV from the wall plate.

• צו שלאָס the TV, ensure the pull tabs are pushed upwards into the locked position after hanging the TV.
• צו מעלדונג the TV, gently pull down on the cords attached to the tabs. This will unlock the TV from the wall plate, allowing you to lift it off.

Image 6.3: The adjustable pull tabs for easy locking and releasinג פון דער טעלעוויזיע.

Image 6.4: Illustration of pulling the cords to release the TV from the mount.

7. וישאַלט

רעגולערע אויפהאלטונג גאראנטירט די לאנגעוויטי און זיכערע אפעראציע פון ​​אייער טעלעוויזיע וואנט מאונט.

• רייניקונג: ווישט אָפּ דעם מאַונט מיט אַ ווייכן, טרוקענעם שטאָף צו באַזייַטיקן שטויב. פֿאַרמייַדט אַברייסיוו רייניגער אָדער סאָלווענטן.
• פּעריאָדיש טשעקס: Periodically check all screws and bolts to ensure they are tight and secure. Re-tighten if necessary.
• דורכקוקן פֿאַר שעדיקן: Inspect the mount for any signs of wear, corrosion, or damage. If any issues are found, contact customer support and do not use the mount until it is repaired or replaced.

8. טראָובלעשאָאָטינג

If you encounter any issues during or after installation, refer to the following common problems and solutions.

9. וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official USX MOUNT webזייטל. האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן פֿאַר קיין וואָראַנטי קליימז.

If you have any questions or require additional assistance, please do not hesitate to contact USX MOUNT customer service.