BONTEC Full Motion TV Wall Mount (Model CT140L-FBA) Instruction Manual

1. פּראָדוקט איבערview

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BONTEC Full Motion TV Wall Mount, Model CT140L-FBA. This mount is designed to securely hold 26-65 inch flat and curved screens, offering extensive adjustability for optimal viewing.

שליסל פֿעיִקייטן אַרייַננעמען:

• Ultra-Long Extension: Extends from 2.9 inches to 37.4 inches from the wall.
• וניווערסאַל קאַמפּאַטאַבילאַטי: Supports VESA patterns from 200x200mm to 400x400mm and TVs weighing up to 77 lbs (35 kg).
• Full Motion Adjustment: Allows for +5°/-10° tilt, ±90° swivel, and ±4° leveling.
• שווער-פליכט קאַנסטראַקשאַן: Built from reinforced steel with a three-section five-arm structure for stability.
• ינטעגראַטעד קאַבלע פאַרוואַלטונג: Includes cable ties to keep wires organized.

2. זיכערקייַט אינפֿאָרמאַציע

WARNING: Read all instructions carefully before installation. Incorrect assembly or installation may result in serious injury or damage.

• Ensure the mounting surface can safely support the combined weight of the mount and your TV.
• This mount is designed for installation on concrete walls, brick walls, or wooden stud walls. נישט מאָנטירן אויף טרוקן וואַנט אַליין.
• Always use appropriate safety equipment, such as eye protection, during installation.
• אויב איר זענט נישט זיכער וועגן קיין טייל פון די ינסטאַלירונג פּראָצעס, קאָנסולטירט אַ קוואַליפֿיצירט פאַכמאַן.
• האַלט קינדער און חיות אַוועק פון דער אַרבעט געגנט בעת די ינסטאַלירונג.

3. פּעקל אינהאַלט

Verify that all components are present before beginning installation. Refer to the included hardware bag for specific screw sizes and quantities.

טיפּישע פּאַקעט אינהאַלט כולל:

• וואַנט פּלאַטע פֿאַרזאַמלונג
• טעלעוויזיע קלאַמער אָרעמס
• Mounting Hardware (screws, anchors, washers for various TV and wall types)
• בלאָז לעוועל
• Cable Ties (5 pieces)
• ינסטראַקשאַנז מאַנואַל

4. ספּעסאַפאַקיישאַנז

5. סעטאַפּ און ייַנמאָנטירונג

Before you begin, ensure you have the necessary tools: a drill, stud finder (for wood studs), pencil, measuring tape, and a hammer (for concrete/brick anchors). A bubble level is included with the mount.

5.1. Wall and TV Compatibility Check

Confirm your TV's VESA pattern and weight are within the mount's specifications. The mount supports VESA patterns from 200x200mm to 400x400mm and a maximum weight of 77 lbs. This mount is compatible with concrete, brick, and wooden stud walls. Do not install on drywall alone.

This image illustrates the wide compatibility of the mount with various wall types (concrete, wood stud, brick) and VESA patterns, indicating a maximum load capacity of 77 lbs. It explicitly warns against mounting on drywall alone.

5.2. ינסטאַלירונג סטעפּס

For a detailed visual guide, please watch the official installation video below.

1. Configure and Assemble Monitor Plate: Depending on your TV's VESA pattern, assemble the monitor plate using the provided screws (M-A/B/C/D/E/F) and arms (E, F).
2. Attach VESA Plate to the Back of Your TV: Secure the assembled VESA plate to the back of your TV using the appropriate screws (M-G/H or M-I/J/K) and washers. Ensure a snug fit.
3. Secure the Wall Plate to the Wall:
   • For Wooden Stud Walls: Use a stud finder to locate the center of a wooden stud. Mark the drilling points using the wall plate as a template. Drill pilot holes and secure the wall plate using the provided lag bolts and washers.
   • פֿאַר ציגל אָדער בעטאָן ווענט: Mark the drilling points. Drill holes using a masonry drill bit. Insert the concrete anchors flush with the wall. Secure the wall plate using the provided lag bolts and washers. Avoid drilling into mortar lines between bricks.
4. Hang the TV onto the Wall Plate: Carefully lift your TV with the attached VESA plate and hook it onto the wall plate. Secure the TV to the mount using the safety screws or locking mechanism.

6. אַפּערייטינג ינסטרוקטיאָנס

Your BONTEC Full Motion TV Wall Mount offers versatile adjustments for optimal viewפון פאַרשידענע שטעלעס.

6.1. Adjusting Tilt, Swivel, and Level

• טילט: The mount allows for a tilt range of +5° (upward) to -10° (downward). Use the tool-free tilt mechanism to adjust the vertical viewינג ווינקל.
• סוויוול: The articulating arm allows for a ±90° swivel, enabling you to turn your TV left or right to suit your viewינג שטעלע.
• מדרגה: If your TV is not perfectly level after installation, you can adjust it by ±4° using the leveling screws on the TV plate.

This image demonstrates the tilt (+5°/-10°) and level (±4°) adjustment features of the full motion TV mount, allowing for flexible screen positioning.

This image illustrates the ±90° swivel function of the mount, highlighting its ability to provide optimal viewing angles from various locations within a room.

6.2. קאַבלע מאַנאַגעמענט

Use the included cable ties to route and secure your TV cables along the articulating arms. This helps maintain a tidy appearance and prevents cables from getting tangled or damaged during adjustments.

This image highlights key design elements of the mount, including the tool-free tilt mechanism, heavy-duty square tube construction, integrated Velcro cable organizer, and smooth brass washers for fluid movement.

7. וישאַלט

רעגולערע אויפהאלטונג גאראנטירט די לאנגעוויטי און זיכערע אפעראציע פון ​​אייער טעלעוויזיע וואנט מאונט.

• רייניקונג: ווישט אָפּ דעם מאַונט מיט אַ ווייכן, טרוקענעם שטאָף צו באַזייַטיקן שטויב. פֿאַרמייַדט אַברייסיוו רייניגער אָדער סאָלווענטן.
• פּעריאָדיש טשעקס: Annually, check all screws and bolts to ensure they are securely tightened. Over time, vibrations or frequent adjustments can cause fasteners to loosen.
• שמירן: The mount features smooth brass washers for durable adjustments. No additional lubrication is typically required.

8. טראָובלעשאָאָטינג

If you encounter any issues with your BONTEC TV Wall Mount, refer to the following common problems and solutions:

9. וואָראַנטי און שטיצן

Your BONTEC TV Wall Mount is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official BONTEC webזייטל פֿאַר דעטאַלירטע וואָראַנטי טערמינען און באדינגונגען.

For technical support, replacement parts, or any questions regarding your product, please contact BONTEC customer service through their official channels. Contact information can typically be found on the product packaging or the BONTEC webפּלאַץ.