הקדמה
This manual provides instructions for the setup, operation, and maintenance of your TECKNET 125dB Indoor Motion Sensor Alarm. Please read this manual thoroughly before using the device to ensure proper function and safety.
Image: The TECKNET Indoor Motion Sensor Alarm unit and its remote control.
פּעקל אינהאַלט
- 1 x TECKNET Indoor Motion Sensor Alarm Unit
- 1 x רימאָוט קאָנטראָל
- 3 x AAA Batteries (for alarm unit)
- מאָנטירונג שרויפן און וואַנט פּלאַגז
- Double-sided Adhesive Sticker
- באַניצער מאַנואַל (דעם דאָקומענט)
פּראָדוקט איבערview
Familiarize yourself with the components of your motion sensor alarm and remote control.
Image: Detailed diagram showing the alarm unit and remote control with numbered parts and their functions.
- Volume/Pairing Button: Adjusts volume and initiates pairing.
- מאַכט קנעפּל: Turns the alarm unit ON/OFF.
- מאָדע קנעפּל: Switches between Doorbell and Alarm modes.
- Arm Button (Remote): Activates the alarm system.
- Disarm Button (Remote): Deactivates the alarm system.
- Volume/Mode Button (Remote): Adjusts volume or switches modes.
- SOS Button (Remote): Triggers an immediate alarm in emergencies.
- Siren (125dB): Emits the alarm sound.
- דעטעקשאַן פֿענצטער: Infrared sensor for motion detection.
- 3*AAA Batteries (Included): Power source for the alarm unit.
- USB-5V Port: Alternative power input for the alarm unit.
סעטאַפּ
1. מאַכט צושטעלן
The TECKNET Motion Sensor Alarm can be powered by batteries or via a USB-5V connection.
- ייַנמאָנטירונג פון באַטאַרייע: Slide open the battery cover on the back of the alarm unit. Insert 3 AAA 1.5V batteries, ensuring correct polarity. Close the battery cover securely.
- וסב מאַכט: Alternatively, connect a standard USB-5V power adapter (not included) to the USB port on the alarm unit.
Image: Visual guide for installing AAA batteries and connecting the USB power cable to the alarm unit.
2. Mounting the Alarm Unit
The alarm unit can be installed using either the provided adhesive sticker or screws.
- קלעפּיק מאַונטינג: Attach the double-sided adhesive sticker to the back of the alarm unit's base, then firmly press it onto a clean, dry surface at your desired location.
- שרויף מאָונטינג: Use the included screw kit to securely mount the alarm unit to a wall or ceiling. The unit can rotate 360 degrees, allowing you to adjust the detection direction.
- פּלייסמאַנט קאָנסידעראַטיאָנס: Position the alarm unit to cover the desired detection area. The optimal detection range is 16-26 feet with a 120° angle. Avoid placing it near heat sources or in direct sunlight, which can cause false alarms.
Image: The motion sensor alarm installed in a living room, illustrating its 120-degree wide-angle detection and 360-degree rotation capability.
Image: Step-by-step guide for installing the alarm unit using either double-sided stickers or screws.
אַפּערייטינג ינסטראַקשאַנז
1. טורנינג אויף / אויסגעלאשן
- צו קער אויף: Long press the Power Button (2) on the alarm unit. You will hear one short beep and see one flashing light, indicating it is active.
- צו קער אַוועק: Long press the Power Button (2) again.
2. מאָדע סעלעקציע
The alarm unit has two operating modes: Doorbell Mode and Alarm Mode.
- דאָרבעל מאָדע: When motion is detected, the unit will emit a chime sound. This is suitable for welcoming visitors or as an entry alert.
- שרעק מאָדע: When motion is detected, the unit will activate a 125dB siren and strobe light for 2 minutes to deter intruders.
To switch between modes, press the Mode Button (3) on the alarm unit or the Volume/Mode Button (6) on the remote control.
Image: Illustration of the alarm functioning in Doorbell Mode for visitors and Alarm Mode for intruders.
3. ניצן די רימאָוט קאָנטראָל
The remote control allows for convenient operation of the alarm unit from up to 328 feet (100 meters) away.
- אַרמינג די שרעק: Short press the Arm Button (4) on the remote. The device will automatically arm after 3 seconds.
- דיסאַרמינג די שרעק: Short press the Disarm Button (5) on the remote.
- נויטפאַל סאָס: In an emergency, press the SOS Button (7) on the remote to immediately trigger the alarm siren.
- באַנד אַדזשאַסטמאַנט: Use the Volume/Pairing Button (1) on the alarm unit to cycle through volume levels (80dB, 100dB, 125dB).
Video: Demonstrates how to use the remote control for arming, disarming, and mode switching for the TECKNET Motion Sensor Alarm.
ווידעא: איבערview of the TECKNET Indoor Motion Sensor Alarm with Remote Control, highlighting its features and operation.
וישאַלט
1. באַטערי פאַרבייַט
When the batteries are low, the alarm unit may indicate this with a specific light pattern or reduced performance. Replace the 3 AAA batteries as described in the "Power Supply" section of Setup.
2. רייניקונג
Wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the unit.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Alarm not sounding or unit not powering on. | Low or dead batteries; incorrect battery installation; unit not turned on. | Replace batteries with new AAA batteries, ensuring correct polarity. Long press the Power Button to turn on the unit. Ensure USB power is connected if not using batteries. |
| פאַלשע אַלאַרמען. | Movement from pets; drafts; direct sunlight; heat sources; unit placed too close to moving objects. | Adjust placement to avoid areas with pets or environmental factors. Ensure the detection window is clear. The PIR technology is designed to reduce false alarms from non-human motion. |
| ווייַט קאָנטראָל נישט ארבעטן. | Out of range; remote battery low; interference. | Move closer to the alarm unit (within 328ft/100m). Replace the remote control battery (typically a coin cell battery, not specified in JSON, so general advice). Ensure no major obstructions. |
| Alarm sounds continuously for 2 minutes. | This is normal behavior in Alarm Mode once triggered. | Disarm the alarm using the remote control. |
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| סאָרט | טעקנעט |
| מאָדעל נומער | TK-HA001 |
| קאָליר | ווייַס |
| מאַכט מקור | Battery Powered (3 AAA batteries) or USB-5V |
| פּונקט וואָג | 5.6 אונסעס |
| מאַקסימום דעטעקשאַן קייט | 30 feet (approx. 9 meters) / 16-26 feet (approx. 5-8 meters) |
| דעטעקשאַן ווינקל | 120° |
| סירען באנד | אַרויף צו 125 דב (אַדזשאַסטאַבאַל) |
| רימאָוט קאָנטראָל קייט | אַרויף צו 328 פֿיס (100 מעטער) |
| מאַונטינג טיפּ | וואַנט מאָונט (קלעבשטאָף אָדער שרויפן) |
| נומער דימענשאַנז (ד רענטגענ וו רענטגענ ה) | 2.4"ד רענטגענ 2.4"וו רענטגענ 3"ה |
וואָראַנטי אינפֿאָרמאַציע
TECKNET products are designed and manufactured to high-quality standards. For specific warranty details regarding your TECKNET 125dB Indoor Motion Sensor Alarm, please refer to the warranty card included with your purchase or visit the official TECKNET webפּלאַץ.
קונה שטיצן
If you encounter any issues or have questions about your TECKNET Motion Sensor Alarm, please contact TECKNET customer support. Contact information can typically be found on the product packaging, the official TECKNET webוועבזייטל, אדער דורך אייער הענדלער.
פֿאַר מער אינפֿאָרמאַציע, קענט איר באַזוכן די TECKNET קראָם אויף עמעזאָן.