AGT INDUSTRIAL AGT-MX15-(B) Small Excavator Instruction Manual

1. זיכערקייַט אינפֿאָרמאַציע

For safe operation of the AGT-MX15-(B) Small Excavator, please adhere to all safety guidelines. This equipment is intended for specific uses and requires careful handling.

• Always wear appropriate personal protective equipment (PPE), including hard hat, safety glasses, gloves, and steel-toed boots.
• Ensure the operating area is clear of personnel, obstacles, and overhead hazards before starting.
• Never operate the excavator under the influence of alcohol or drugs.
• Perform a pre-operation inspection to check for any damage, leaks, or loose components.
• Understand and follow all local safety regulations and site-specific rules.
• Do not exceed the maximum digging depth or lifting capacity.
• Secure the machine properly when transporting.

2. פּראָדוקט איבערview

The AGT-MX15-(B) is a compact and powerful 1-ton mini excavator designed for various digging and earthmoving tasks. It features a 13.5HP engine and includes a non-hydraulic thumb for enhanced material handling capabilities.

שליסל פֿעיִקייטן און ספּעסאַפאַקיישאַנז:

• מאָדעל: AGT-MX15-(B)
• אַפּערייטינג וואָג: 0.9 Ton (approximately 2205 lbs)
• Net Horsepower (HP): 13.5 הפּ
• פאַרשפּרייטונג: 420 קק
• Max Digging Depth: 1,769 מם (70 אינטש)
• Max Digging Height: 2,583 מם (102 אינטש)
• קוילעלדיק הייך: 2,210 מם (91 אינטש)
• קוילעלדיק ברייט: 936 מם (43 אינטש)
• Blade Max Drop Depth: 146 מם (6 אינטש)
• שפּור ברייט: 180*72*37 (Width*Pitch Length*Links)
• Thumb: Non-hydraulic thumb included
• מאָדעל יאָר: 2024

פיגורע 2.1: זייַט view of the AGT-MX15-(B) Small Excavator, showing the main body, tracks, and boom assembly.

Figure 2.2: The AGT-MX15-(B) Small Excavator with its boom extended and the non-hydraulic thumb attachment visible on the bucket.

3. סעטאַפּ און אַסעמבלי

The AGT-MX15-(B) excavator typically arrives partially assembled. Follow these general steps for final setup:

1. אויספּאַקן: Carefully remove the excavator from its packaging. Inspect for any shipping damage.
2. פליסיק טשעקס: Verify engine oil, hydraulic fluid, and fuel levels. Top up if necessary using recommended fluids.
3. באַטערי קשר: Connect the battery terminals, ensuring correct polarity.
4. קאָנטראָל פאַמיליאַריזאַטיאָן: Locate and understand the function of all control levers, pedals, and switches. Refer to the control diagram (if provided separately).
5. אַטאַטשמאַנט ינסטאַלירונג: If any attachments (e.g., bucket, thumb) are not pre-installed, follow the specific instructions for secure mounting. Ensure all pins and safety clips are in place.
6. זיכערהייט גאַרד ינסטאַלירונג: Install any removable safety guards or covers as instructed.

A tool box is included with the product for basic maintenance and assembly needs.

4. אַפּערייטינג ינסטרוקטיאָנס

Before operating, ensure you have read and understood the safety information. Always operate the excavator from the operator's seat.

4.1 סטאַרטינג די מאָטאָר

1. Ensure the parking brake is engaged and all controls are in the neutral position.
2. Turn the ignition key to the 'ON' position.
3. If equipped, engage the choke for cold starts.
4. Turn the ignition key to the 'START' position and release once the engine starts. Do not crank for more than 5 seconds.
5. Allow the engine to warm up for a few minutes before beginning operation.

4.2 יקערדיק אָפּעראַציע

• דרייווינג: Use the track control levers/pedals to move the excavator forward, backward, and to turn.
• Boom and Arm: Use the joystick controls to raise/lower the boom and extend/retract the arm.
• עמער: Use the joystick controls to curl in or dump the bucket.
• מאַך: Use the swing control to rotate the upper structure of the excavator.
• בלייד: Use the blade control lever to raise or lower the dozer blade.
• Thumb: The non-hydraulic thumb is manually adjustable or fixed, used in conjunction with the bucket for gripping materials.

4.3 פאַרמאַכן אַראָפּ

1. פּאַרק די עקסקאַווייטער אויף גלייַך ערד.
2. Lower all attachments to the ground.
3. דינגען די פּאַרקינג טאָרמאָז.
4. Allow the engine to idle for a few minutes to cool down.
5. Turn the ignition key to the 'OFF' position.
6. אַראָפּנעמען די שליסל צו פאַרמייַדן אַנאָטערייזד נוצן.

5. וישאַלט

Regular maintenance is crucial for the longevity and safe operation of your AGT-MX15-(B) excavator.

• טעגלעכע טשעקס: Inspect fluid levels (engine oil, hydraulic fluid, coolant), check for leaks, inspect tracks for damage, and ensure all safety devices are functional.
• מאָטאָר וישאַלט: Follow the engine manufacturer's recommendations for oil changes, air filter cleaning/replacement, and spark plug inspection.
• הידראַוליק סיסטעם: Check hydraulic fluid level regularly. Replace hydraulic filters as per schedule.
• Greasing: Lubricate all grease points on the boom, arm, bucket, and swing bearing daily or before each use.
• שפּור שפּאַנונג: Periodically check and adjust track tension to prevent premature wear.
• רייניקונג: Keep the excavator clean, especially around the engine and hydraulic components, to prevent overheating and contamination.
• סטאָרידזש: When storing for extended periods, ensure the excavator is clean, all fluids are at correct levels, and the battery is disconnected or maintained.

6. טראָובלעשאָאָטינג

This section provides solutions to common operational issues. For complex problems, contact qualified service personnel.

• מאָטאָר קען נישט אָנהייבן:
  • קוק די ברענוואַרג מדרגה.
  • Ensure battery connections are secure and the battery is charged.
  • Verify ignition switch is functioning.
  • קאָנטראָלירט דעם צינדקער פֿאַר פֿאַרפּעסטיקונג אָדער שאָדן.
• פארלוסט פון הידראולישער קראַפט:
  • קאָנטראָלירט די הידראַוליק פליסיק מדרגה.
  • Inspect for hydraulic leaks.
  • Ensure hydraulic filters are not clogged.
• איבערהיצונג מאָטאָר:
  • טשעק די קילמיטל מדרגה.
  • Clean radiator fins and engine cooling areas.
  • ענשור געהעריק ווענטאַליישאַן.
• ומגעוויינטלעך נויזיז:
  • Identify the source of the noise.
  • Check for loose components, worn bearings, or insufficient lubrication.

7. דעטאַלירטע ספּעציפֿיקאַציעס

8. וואָראַנטי און שטיצן

For information regarding warranty coverage, technical support, or to order replacement parts, please contact AGT INDUSTRIAL customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Always provide your model number (AGT-MX15-(B)) and serial number when contacting support to ensure efficient service.