Feyachi RSL-88 Reflex Sight with Green Laser Instruction Manual

הקדמה

Thank you for choosing the Feyachi RSL-88 Reflex Sight with Green Laser. This manual provides essential information for the safe and effective use, installation, and maintenance of your new optical device. Please read it thoroughly before operation.

זיכערקייַט אינפֿאָרמאַציע

לייזער זיכערקייַט: This product contains a Class IIIA green laser with an output of less than 5mW. Avoid direct eye exposure to the laser beam. Never point the laser at aircraft or people. Always ensure the laser is off when not in use. Misuse of laser devices can cause serious eye injury.

Always handle firearms and optical devices responsibly. Ensure the firearm is unloaded and safe before installing, adjusting, or performing maintenance on the sight. Wear appropriate eye protection during use.

וואָס איז אין די קעסטל

ווען איר עפנט אייער פעקל, ביטע זיכער מאכן אז אלע קאמפאנענטן זענען דא:

• Feyachi RSL-88 Reflex Sight
• Integrated Green Laser Sight
• דרוק סוויטש
• Allen Wrench for adjustments
• רייניקונג קלאָט
• באַניצער מאַנואַל
• Batteries (CR2032 for reflex sight, LR44 for laser)

Image: All components included with the Feyachi RSL-88 Reflex Sight.

פּראָדוקט פֿעיִקייטן

• Versatile Reticle Options: Offers 4 distinct reticle patterns and 2 color options (red/green), each with 5 adjustable brightness levels for various lighting conditions.
• Efficient Green Laser Sight: Integrated Class IIIA green laser (<5mW) for rapid target acquisition and enhanced aiming accuracy.
• Easy Zeroing and Adjustment: Includes a wrench for precise windage and elevation adjustments for both the reflex sight and laser.
• Rugged and Weatherproof Construction: Manufactured from high-quality aluminum alloy with an anodized finish, providing corrosion resistance, waterproofing, fog proofing, and shock resistance.
• Integrated Fastener Kit: Features a 20mm mount for quick and secure attachment to standard Picatinny rails.

בילד: איבערview of the reflex sight's reticle options and brightness settings.

Image: Detail of the green laser sight component.

סעטאַפּ

1. באַטאַרייע ייַנמאָנטירונג

For Reflex Sight:

1. Locate the battery compartment cap on the top of the reflex sight.
2. שרויפט אַראָפּ דעם דעקל קעגן דעם זייגער.
3. אַרײַנשטעלן איין CR2032 באַטעריע מיטן positive (+) זײַט אַרויף.
4. Replace the cap and tighten it securely to ensure waterproofing.

For Green Laser Sight:

1. Unscrew the rear cap of the laser sight.
2. Insert the LR44 batteries (typically 3) with the correct polarity as indicated inside the compartment.
3. Replace the cap and tighten it.

Video: Official Feyachi video demonstrating the features and potentially battery installation of the Red Dot Sight.

2. אויפשטעלן דעם וויזיר

The RSL-88 reflex sight features an integrated 20mm mount designed for standard Picatinny rails.

1. Loosen the mounting screw on the side of the sight using the provided Allen wrench.
2. Align the sight's base with the Picatinny rail on your equipment.
3. Slide the sight onto the rail to your desired position.
4. Tighten the mounting screw firmly with the Allen wrench to secure the sight. Do not overtighten.

Image: Illustration of the quick-mount convenience on a Picatinny rail.

3. Attaching the Pressure Switch (Optional)

The included pressure switch allows for momentary or constant activation of the laser sight.

1. Remove the standard end cap from the laser sight.
2. Screw the pressure switch cable into the rear of the laser sight.
3. Secure the pressure switch pad to your equipment using the provided hook-and-loop fastener or other preferred method, ensuring easy access during operation.

Image: The pressure switch connected to the laser for tactical use.

אַפּערייטינג ינסטראַקשאַנז

1. Reflex Sight Operation

מאַכט אויף / אַוועק און ברייטנאַס אַדזשאַסטמאַנט:

• Rotate the rotary switch located on the side of the sight.
• Turning the switch to 'G' (Green) or 'R' (Red) will power on the sight.
• Continue rotating to increase or decrease the brightness level (1-5).
• Set the switch to '0' to power off the sight.

Reticle Pattern Selection:

• Use the reticle selector knob located at the front of the sight to cycle through the 4 available reticle patterns.

בילד: איבערview of the reflex sight's reticle options and brightness settings.

2. Laser Sight Operation

נאָרמאַל אָפּעראַציע:

• Press the button on the end cap of the laser sight to turn it on or off.

Pressure Switch Operation:

• The pressure switch typically has two buttons: one for momentary activation (laser on only while pressed) and one for constant on/off. Refer to the specific pressure switch instructions for details.

3. Zeroing and Adjustment

Zeroing is the process of aligning your sight with the point of impact of your projectile. This should be done at a safe shooting range.

Reflex Sight Adjustment:

• הייך אַדזשאַסטמאַנט: Use the provided Allen wrench to turn the 'UP' adjustment screw (usually on top of the sight). Turning clockwise moves the point of impact down; counter-clockwise moves it up.
• ווינדאַגע אַדזשאַסטמאַנט: Use the provided Allen wrench to turn the adjustment screw on the side of the sight. Turning clockwise moves the point of impact left; counter-clockwise moves it right.

Laser Sight Adjustment:

• The laser sight has its own small adjustment screws for windage and elevation. Use a small Allen wrench (often included) to make these adjustments.
• Adjust the laser until its dot aligns with the point of impact or the center of your reflex sight's reticle at your desired zeroing distance.

בילד: דעטאַלירט view of the windage and elevation adjustment screws for the reflex sight and laser.

וישאַלט

• רייניקונג לענסעס: Use the provided cleaning cloth or a soft, lint-free cloth to gently wipe the lenses. For stubborn dirt, use a small amount of lens cleaning solution. Avoid abrasive materials.
• גוף רייניקונג: Wipe the body of the sight with a damp שטאָף צו באַזייַטיקן שמוץ און דעבריס.
• באַטערי פאַרבייַט: Replace batteries when the reticle or laser appears dim or fails to illuminate. Always dispose of used batteries responsibly.
• סטאָרידזש: Store the sight in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
• וועטער קעגנשטעל: While the sight is waterproof and fog proof, prolonged exposure to extreme conditions should be avoided. Ensure all caps and covers are securely tightened.

Image: Visual representation of the sight's durability and weather resistance.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

Image: Visual display of key specifications and the sight in action.

וואָראַנטי און שטיצן

The Feyachi RSL-88 Reflex Sight comes with a 1 יאָר וואָראַנטי from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by misuse, unauthorized modification, or normal wear and tear.

For warranty claims, technical support, or any questions regarding your product, please contact Feyachi customer service through the retailer where the product was purchased or visit the official Feyachi webפּלאַץ פֿאַר קאָנטאַקט אינפֿאָרמאַציע.

ביטע באַהאַלטן אייער קויפן-באַווייַז פֿאַר וואָראַנטי וואַלידאַציע.