1. הקדמה
This manual provides detailed instructions for the installation and maintenance of the Kenmore 10657287790 OEM Refrigerator Door Cam Kit. This kit is designed as a replacement part to restore proper door function in compatible Kenmore refrigerator models. Please read all instructions carefully before beginning installation to ensure correct assembly and safe operation.
וויכטיק: Verify your refrigerator's model number (10657287790) to confirm compatibility with this replacement kit. Appliance parts can appear similar, so careful verification is crucial.
2. זיכערקייַט אינפֿאָרמאַציע
- Always disconnect power to the refrigerator before attempting any repairs or installations.
- טראָגט פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט, ווי למשל הענטשקעס, צו פאַרמייַדן שאָדן.
- אויב איר זענט נישט זיכער וועגן קיין שריט, קאָנסולטירט אַ קוואַליפֿיצירטן עלעקטרישע אַפּאַראַט טעכניקער.
- האַלטן קליין טיילן אַוועק פון קינדער.
3. פּעקל אינהאַלט
The Kenmore 10657287790 Refrigerator Door Cam Kit (Fricpart-051448) typically includes the following components:
- Door Cam Bushings (typically 2)
- Door Cam Washers/Plates (typically 4)
- Various Screws/Fasteners (as required for installation)
Figure 3.1: Contents of the Kenmore 10657287790 Refrigerator Door Cam Kit. The image displays two black door cam bushings, four black oval-shaped cam plates, two silver hex-head screws, two gold hex-head screws, two pointed silver screws, and two pointed gold screws. Also visible are two small mesh-like pieces, possibly washers or shims.
4. ינסטאַלירונג אינסטרוקציעס
Follow these steps to replace the refrigerator door cam kit. Tools required may include a screwdriver set, wrench, and possibly a pry tool.
- צוגרייטן דעם פרידזשידער:
- Unplug the refrigerator from the power outlet to prevent electrical shock.
- Empty the contents of the refrigerator door to reduce weight.
- If possible, have a second person assist in supporting the door during removal and reinstallation.
- Remove the Top Hinge Cover:
- Locate the plastic cover over the top door hinge. Carefully pry it off or remove any screws securing it.
- Remove the Top Hinge:
- Unscrew the bolts or screws holding the top hinge to the refrigerator frame.
- Carefully lift the top hinge off the door pin.
- Remove the Refrigerator Door:
- With assistance, carefully lift the refrigerator door straight up and off the bottom hinge pin.
- Place the door on a protected, flat surface.
- Access and Replace Bottom Cam:
- Locate the bottom door cam on the bottom of the refrigerator door. This is typically a plastic bushing.
- Remove the old, worn cam. It may be held in place by screws or simply slide off.
- Install the new door cam bushing from the kit onto the bottom of the door, ensuring it is seated correctly.
- Access and Replace Bottom Hinge Cam Plate:
- Locate the cam plate on the bottom hinge assembly attached to the refrigerator frame.
- Remove the old cam plate. It might be screwed in or simply rest on the hinge.
- Install the new cam plate from the kit onto the bottom hinge, aligning it properly. Secure with appropriate screws if necessary.
- Reinstall the Refrigerator Door:
- Carefully align the door with the bottom hinge pin, ensuring the new door cam bushing slides onto the new cam plate.
- Lower the door gently into place.
- Reinstall the Top Hinge:
- Place the top hinge back onto the top door pin.
- Secure the top hinge to the refrigerator frame with the screws or bolts previously removed. Tighten securely.
- פאַרבייַטן די שפּיץ הינגע דעקן.
- פּרובירן און ענדיקן:
- Open and close the refrigerator door several times to ensure it swings smoothly and closes properly.
- צאַפּן די פרידזשידער צוריק אין די מאַכט ווענטיל.
- Check for any gaps or misalignment in the door seal. Adjust if necessary.
5. אַפּערייטינג ינסטרוקטיאָנס
After successful installation, the refrigerator door should operate smoothly, closing securely without excessive force. The new door cam kit helps maintain proper door alignment and seal integrity, which is crucial for energy efficiency and food preservation.
- Ensure the door closes completely after each use.
- Avoid forcing the door open or closed, as this can prematurely wear out the cam components.
6. וישאַלט
Regular maintenance can extend the life of your refrigerator door components:
- Periodically inspect the door cams for signs of wear, cracking, or damage.
- Keep the area around the door hinges clean and free of debris.
- If the door begins to sag or becomes difficult to close, inspect the cam kit for wear and consider replacement if necessary.
7. טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Door does not close properly or sags. | Worn or incorrectly installed door cam kit. | Re-check installation steps. Ensure cams are seated correctly. Replace if worn. |
| Door is difficult to open or close. | Friction from new cams or misalignment. | Ensure all screws are tightened appropriately. A small amount of food-grade lubricant can be applied to the cam surfaces if friction persists, but typically not needed for new plastic cams. |
| Gaps in door seal after installation. | Door misalignment. | Adjust the door's position on the hinges. Ensure the top hinge is securely fastened and the door is level. |
8. ספּעסאַפאַקיישאַנז
| אַטריביוט | דעטאַל |
|---|---|
| פאַבריקאַנט | Fricparts |
| טייל נומער | FRIC-PL-APP-TP-22052025-021471 |
| קאַמפּאַטאַבאַל מאָדעל | קענמאָר 10657287790 |
| קאָליר | שוואַרץ / ווייַס |
| נומער פּעקל קוואַנטיטי | 1 |
| נומער פון ברעקלעך | 1 (referring to the kit as one unit) |
| ASIN | B0F9T6VCN5 |
| ערשטער דאַטע בנימצא | 24 מאי 2025 |
9. וואָראַנטי און שטיצן
This product is a replacement part. For specific warranty information, please refer to the terms provided by the original seller or manufacturer at the time of purchase. For technical support or further assistance, please contact the vendor from whom this kit was purchased.
Note: This manual is for informational purposes only. Always prioritize safety and consult a professional if you are uncomfortable performing the installation.
