Imagebon 11.25'' Wireless Apple CarPlay & Android Auto with 4K Dash Cam Instruction Manual

1. הקדמה

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Imagebon 11.25'' Wireless Apple CarPlay & Android Auto system. This device enhances your driving experience by integrating smartphone functionalities, advanced navigation, and dual-channel recording capabilities directly into your vehicle. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. פּעקל אינהאַלט

באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען אַרייַנגערעכנט אין אייער פּעקל:

• Imagebon 11.25'' Wireless Apple CarPlay & Android Auto Display
• Car Charger (Type-C power cord)
• 10m Reversing Camera with Extension Cable
• Adhesive Bracket
• Long Arm Suction Cup Bracket
• AUX קאַבלע
• באַניצער מאַנואַל
• GPS Antenna (if included with specific model variant)

Figure 1: Imagebon 11.25'' Display and all included accessories.

3. אויפשטעלן און אינסטאַלירן

3.1 מאָנטירן דעם דיספּלעי

Choose between the adhesive bracket for a permanent dashboard mount or the long arm suction cup bracket for flexible positioning on the dashboard or windshield. Ensure the mounting surface is clean and dry before application.

1. Select your preferred mounting location, ensuring it does not obstruct your view אדער אריינמישן זיך אין די דרייווינג קאנטראלן.
2. Attach the chosen bracket to the back of the display unit.
3. Secure the display with the bracket to your chosen location. For adhesive mounts, press firmly for several seconds. For suction cup mounts, ensure the suction cup is clean and the lever is locked into place.

3.2 מאַכט קאַנעקשאַן

Connect the provided car charger to the Type-C port on the display unit and plug the other end into your vehicle's cigarette lighter socket. Ensure the charging head is at least 5V/3A for optimal performance. For first-time use, charge the device for at least 10 minutes non-stop.

3.3 דערציען אַפּאַראַט ינסטאַלירונג

The rear camera provides a 1080P full HD view and is essential for the real-time reversing view שטריך.

1. Mount the rear camera on the back of your car, typically near the license plate or above it.
2. Route the camera's extension cable from the rear of the car to the display unit, typically along the vehicle's headliner and A-pillar, tucking it under the trim for a clean installation.
3. Connect the red wire of the camera cable to the positive terminal of your vehicle's reversing light. This ensures the camera activates automatically when reversing.
4. Connect the two sockets of the rear camera's extension cable to the AV IN port on the display unit.

Figure 2: Illustration of the rear camera wiring and installation process.

4. קאַנעקטיוויטי

4.1 Wireless Apple CarPlay Connection

Connect your iPhone wirelessly to access CarPlay features.

1. אויף דיין iPhone, גיין צו סעטטינגס > בלועטאָאָטה and search for the device (e.g., "qckj_pnd_****").
2. צאַפּן צו פאַרבינדן.
3. Wait for a pop-up on your iPhone asking to "Use CarPlay with SmartScreen?". Select ניצן CarPlay.
4. CarPlay will now be active on your Imagebon display.

Figure 3: Visual guide for Apple CarPlay connection.

4.2 דראָטלאָזע אַנדרויד אויטאָ פֿאַרבינדונג

Connect your Android phone wirelessly to access Android Auto features.

1. On your Android phone, go to סעטטינגס > קאָננעקטעד דעוויסעס > בלועטאָאָטה and search for the device (e.g., "qckj_pnd_****").
2. Tap to connect and wait for the "Bluetooth pairing" pop-up box.
3. דריקט פּאָר and wait for the screen to cast.
4. Android Auto will now be active on your Imagebon display.

Figure 4: Visual guide for Android Auto connection.

4.3 Mirror Link (Airplay/Miracast)

The display supports wireless mirroring for both Android (Miracast) and iOS (Airplay) devices.

1. On your smartphone, enable Wi-Fi and connect to the display's Wi-Fi network (e.g., "qckj_pnd_****").
2. For iOS devices, open the Control Center and select סקרין מירערינג, then choose "SmartScreen".
3. For Android devices, access your phone's screen projection settings (often found under "More connections" or "Cast") and select the display's name.

Figure 5: Airplay connection steps for iOS devices.

Figure 6: Miracast connection steps for Android devices.

4.4 Audio Output Modes

The device offers four audio output modes to integrate with your vehicle's sound system:

• געבוירן: Audio plays directly from the display's internal speaker.
• בלועטאָאָטה (BT): Connect the display to your car's Bluetooth system for audio output.
• עפעם: Transmit audio to your car's FM radio by tuning both devices to the same frequency.
• AUX: Use the provided AUX cable to connect the display to your car's AUX input.

פיגורע 7: איבערview of available audio output options.

5. אפערירן די דעש קעם

5.1 Dual Dash Cam Recording

The device features a dual-lens dash cam system:

• פראָנט אַפּאַראַט: Records in stunning 4K Ultra HD with a wide-angle lens.
• דערציען אַפּאַראַט: Captures in 1080P Full HD.

Both cameras record simultaneously, providing comprehensive coverage of your drive.

Figure 8: Dual dash cam capabilities with 4K front and 1080P rear recording.

5.2 שלייף רעקאָרדינג

The dash cam supports loop recording, ensuring continuous capture of new footage. It supports up to 128GB storage for seamless loop recording. An SD card is not included and must be purchased separately.

Figure 9: Seamless loop recording functionality.

5.3 רעאַל-צייט ריווערסינג View

When the vehicle is put into reverse, the display automatically switches to the rear camera view, providing a wide 150° angle, adjustable reverse lines, and IP67 waterproof protection for enhanced safety during parking maneuvers.

Figure 10: Real-time reversing view with parking assistance.

5.4 Superior Night Vision

The dash cam system is equipped with superior night vision capabilities, featuring 4K UHD for the front camera and an F1.8 aperture, ensuring clear recordings even in low-light conditions.

Figure 11: Superior night vision for clear recordings in low light.

6. ווייַז פֿעיִקייטן

6.1 11.25'' In-Cell Touch Panel

The display features a large 11.25-inch in-Cell touch panel with a 1920*720 resolution. In-Cell technology provides a simplified structure with an ultra-narrow bezel and slim thickness, offering rapid response and improved picture clarity compared to traditional On-Cell technology.

Figure 12: In-Cell Touch Panel Technology benefits.

6.2 Automatic Day/Night Brightness

The device automatically switches between day and night modes using built-in light sensors. You can also manually adjust screen brightness in the settings. The default daytime brightness is from 6 AM to 6 PM, with the remaining time defaulted to night brightness.

6.3 קול קאָנטראָל

Utilize voice control features like Siri (for Apple CarPlay) or Google Assistant (for Android Auto) to manage calls, music, and navigation hands-free, enhancing driving safety.

פיגור 13: שטימע קאנטראל פאר הענט-פרייע אפעראציע.

6.4 Multiple Split Screen Modes

The large 11.25-inch display supports multiple split-screen modes, allowing you to view navigation, music, and other applications simultaneously for enhanced multitasking while driving.

Figure 14: Multiple split screen modes for enhanced functionality.

7. וישאַלט & קער

• רייניקונג: Use a soft, dry cloth to clean the display. Avoid abrasive cleaners or solvents.
• ווייכווארג דערהייַנטיקונגען: The device supports automatic Over-The-Air (OTA) updates to ensure optimal performance and access to the latest features. Ensure the device is connected to a stable Wi-Fi network for updates.
• טעמפּעראַטור: ויסמיידן יקספּאָוזינג די מיטל צו עקסטרעם טעמפּעראַטורעס.

8. טראָובלעשאָאָטינג

• קיין מאַכט: Ensure the car charger is securely plugged into both the device and the cigarette lighter socket. Verify the vehicle's power outlet is functional.
• קאָנעקטיוויטי פּראָבלעמען (קאַרפּליי/אַנדרויד אויטאָ): Ensure Bluetooth and Wi-Fi are enabled on your smartphone and the device. Try restarting both the device and your phone. Clear previous pairings and attempt to reconnect.
• קיין אַודיאָ: Check the selected audio output mode (Native, BT, FM, AUX) and ensure your car's audio system is correctly configured for that input. Adjust volume levels on both the device and your car stereo.
• דאַש קאַם רעקאָרדירט ​​נישט: Ensure an SD card (up to 128GB) is inserted correctly. Check if loop recording is enabled in the settings.
• סקרין ברייטנאַס: If screen brightness is not changing automatically, check the auto icon in the brightness settings. Manual adjustment is also available.

9. ספּעסאַפאַקיישאַנז

10. וואָראַנטי & שטיצן

For warranty information and technical support, please refer to the documentation included in your product packaging or visit the official Imagebon webפּלאַץ. האַלטן דיין קויפן קאַבאָלע פֿאַר וואָראַנטי קליימז.