1. הקדמה
Thank you for choosing the Empava 71-inch Two-Person Acrylic Whirlpool Bathtub. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new bathtub. Please read all instructions carefully before installation and use, and retain this manual for future reference.

Image 1.1: The Empava 71-inch Two-Person Acrylic Whirlpool Bathtub, showcasing its spacious design, active hydro-massage jets, and subtle chromotherapy lighting. Two headrests are visible, indicating its two-person capacity.
2. וויכטיק סאַפעטי אינפֿאָרמאַציע
To reduce the risk of injury, please observe the following safety precautions:
- עלעקטריקאַל זיכערקייַט: Ensure the bathtub is connected to a Ground-Fault Circuit Interrupter (GFCI) protected circuit. Do not operate without a properly installed GFCI.
- וואַסער טעמפּעראַטור: Test the water temperature before entering the tub. Water temperatures above 100°F (38°C) can be hazardous to your health.
- קינדער: Supervise children at all times when they are in or near the bathtub.
- געזונט באדינגונגען: Consult a physician before use if you are pregnant, diabetic, have heart disease, high blood pressure, or any other medical condition.
- כעמישער: Use only recommended cleaning agents. Avoid abrasive cleaners or harsh chemicals that may damage the acrylic surface or internal components.
- אריינגאנג/ארויסגאנג: Exercise caution when entering or exiting the bathtub. The textured floor provides slip resistance, but wet surfaces can still be slippery.
3. סעטאַפּ און ייַנמאָנטירונג
This section outlines the steps for unboxing and installing your Empava whirlpool bathtub. Professional installation is recommended.
3.1 ונבאָקסינג
Carefully remove the wooden crate panels. Locate the accessory box and protective foam. Inspect all components for damage before proceeding.
Video 3.1: This video demonstrates the unboxing process of the Empava 71-inch Whirlpool Bathtub, including removal of the wooden crate and protective packaging, and initial component installation.
3.2 קאָמפּאָנענט אינסטאַלאַציע
Your bathtub comes with pre-installed drain, waterfall faucet, and showerhead. Ensure all connections are secure and watertight. The included pillows can be placed for added comfort.

Image 3.2: A diagram illustrating the precise dimensions of the Empava 71-inch Two-Person Acrylic Whirlpool Bathtub, including length, width, height, and internal measurements for water jets and seating areas. This is crucial for planning the installation space.

בילד 3.3: א דעטאלירטע view of the sleek waterfall faucet and the various control knobs for water temperature and jet functions, highlighting the polished chrome finish.

Image 3.4: A close-up of the two black, ergonomic headrests positioned at either end of the bathtub, designed for comfortable reclining during a soak.
4. אַפּערייטינג ינסטרוקטיאָנס
Enjoy the full features of your Empava whirlpool bathtub by following these operating guidelines.
4.1 אָנפֿילן די וואַנע
Turn the hot and cold water knobs to achieve your desired water temperature. The waterfall faucet provides a steady stream. Ensure the water level is above the jets before activating the hydro-massage system.
4.2 Activating Hydro-Massage Jets
The bathtub features a powerful 16-zone hydrotherapy system. Press the pneumatic switch to activate the 1.5HP motor, which powers the jets. Adjust the flow and direction of individual jets by rotating their outer rings to target specific areas for deep-tissue massage.

Image 4.1: A close-up shot of the hydro-massage jets within the bathtub, showing water being powerfully expelled, creating a therapeutic bubbling effect. This image highlights the functionality of the jet system.
4.3 Chromotherapy Lighting
The bathtub includes chromotherapy lighting to enhance your relaxation experience. The lights automatically cycle through various colors when the jets are active. There is no separate control to turn off the chromotherapy lights while the jets are running.
Video 4.2: This video provides a dynamic overview of the Empava 71-inch Two-Person Acrylic Whirlpool Bathtub in operation, demonstrating the powerful hydro-massage jets and the soothing chromotherapy lighting effects.

Image 4.3: A couple enjoying a relaxing soak in the Empava whirlpool bathtub, with the chromotherapy lights illuminating the water, creating a serene and inviting atmosphere.
5. וישאַלט און קער
Proper care will ensure the longevity and pristine appearance of your Empava bathtub.
- רייניקונג פון די אַקריליק ייבערפלאַך: Use a soft cloth and a non-abrasive, mild liquid cleaner. Avoid harsh chemicals, scouring pads, or abrasive powders, as these can scratch the acrylic.
- דזשעט רייניקונג: Periodically fill the tub with warm water and add a small amount of dishwasher detergent or a specialized jet cleaning solution. Run the jets for 10-15 minutes, then drain and rinse thoroughly.
- Faucet and Fixtures: Clean chrome fixtures with a soft cloth and a non-abrasive cleaner designed for chrome.
- דריינס וישאַלט: Regularly check and clean the drain to prevent clogs. The push-pop drain mechanism is easy to remove for cleaning.
- פאַרהיטן פלעקן: Avoid leaving bath products, such as bath bombs or dyes, to dissolve directly on the acrylic surface for extended periods.
6. טראָובלעשאָאָטינג
If you encounter any issues with your bathtub, refer to the following common problems and solutions:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Jets not activating | Not enough water in the tub; GFCI tripped; Motor issue | Ensure water level is above jets; Reset GFCI; Contact customer support if motor does not respond. |
| שוואַכער דזשעט דרוק | Air intake blocked; Jet nozzles clogged | Check for obstructions around air intake; Clean jet nozzles as per maintenance instructions. |
| וואַסער ניט דריינינג | Drain mechanism clogged or stuck | Remove and clean the push-pop drain mechanism. |
| Flickering chromotherapy lights | Electrical connection issue; LED component fault | Check electrical connections; If problem persists, contact customer support. |
7. ספּעסאַפאַקיישאַנז
Key technical details for your Empava whirlpool bathtub:
| שטריך | דעטאַל |
|---|---|
| מאָדעל נומער | E1-71JT667B |
| פּראָדוקט דימענשאַנז | 71"W x 42"L x 27"H |
| מאַטעריאַל | Acrylic (Fiberglass-reinforced) |
| קאָליר | ווייַס |
| קאַפּאַציטעט | 177 גאלאנען |
| Hydro-Massage Jets | 16 (6 lumbar, 6 body, 4 foot) |
| מאָטאָר כאָרספּאַוער | 1.5 הפּ |
| ייַנמאָנטירונג טיפּ | Freestanding / Alcove |
| Certification | ETL/UL Certified Motor |
| אַרייַנגערעכנט קאַמפּאָונאַנץ | Waterfall Faucet, Showerhead (3 spray modes), 2 Pillows, Pre-installed Drain, 120V GFCI cord |
| פּונקט וואָג | 338 פונט |
8. וואָראַנטי און שטיצן
Your Empava 71-inch Two-Person Acrylic Whirlpool Bathtub is backed by a 3-יאָר לימיטעד וואָראַנטי, covering the motor and other specified components against manufacturing defects.
For warranty claims, technical assistance, or any questions regarding your product, please contact Empava Customer Support:
- Webפּלאַץ: Visit the Empava Store on Amazon
- טעלעפֿאָן: Refer to your purchase documentation for the most current contact number.
- בליצפּאָסט: Refer to your purchase documentation for the most current contact email.
Please have your model number (E1-71JT667B) and proof of purchase ready when contacting support.