ROROLL WS-6933 Satellite Finder User Manual

הקדמה

The ROROLL WS-6933 is a compact and efficient DVB-S2 digital satellite finder meter designed to assist users in accurately adjusting satellite dishes. This device provides real-time measurements of signal strength and quality, ensuring optimal satellite reception. Its user-friendly interface and portable design make it an essential tool for both professional installers and DIY enthusiasts.

This manual provides detailed instructions on how to set up, operate, and maintain your WS-6933 satellite finder, along with troubleshooting tips and product specifications.

סעטאַפּ

1. אויספּאַקן און ערשטע אָפּצאָל

Carefully remove all components from the packaging. Before first use, ensure the device is fully charged. Connect the provided 12V/1.2A DC adapter to the charging port on the device and plug it into a power outlet. The charging indicator will illuminate. A full charge typically takes approximately 3 hours, providing up to 3 hours of operating time.

Figure 1: Included accessories for the WS-6933, showing the USB cable, power adapter, and other components.

2. דיווייס איבערview און קאַנעקשאַנז

Familiarize yourself with the device's layout. The WS-6933 features a 2.1-inch LCD screen, control buttons, and various ports for connectivity.

פיגורע 2: פראָנט view of the WS-6933, displaying the LCD screen, navigation buttons, and signal quality meter.

פיגורע 3: שפּיץ view of the WS-6933, highlighting the LNB input connector and the power switch.

• LNB אַרייַנשרייַב: Connect your LNB cable from the satellite dish to this port.
• מאַכט סוויטש: טוט אָן/אויס דעם אַפּאַראַט.
• וסב פּאָרט: Used for software upgrades.

אַפּערייטינג ינסטראַקשאַנז

1. Powering On and Main Menu

Flip the power switch to the ON position. The device will boot up and display the main menu on the LCD screen. Use the navigation buttons (UP, DOWN, LEFT, RIGHT) and the OK button to navigate through the menu options.

Figure 4: The WS-6933 main menu, providing access to various functions.

2. Satellite Dish Adjustment

The primary function of the WS-6933 is to help you find and optimize satellite signals. Follow these steps:

1. אויסקלייבן סאַטעליט: From the main menu, navigate to 'Sat Setting' or 'Signal Scan'. Select the desired satellite from the pre-programmed list or add a new one.
2. Connect to LNB: Ensure your LNB cable is securely connected to the device's LNB input. The device will provide power to the LNB (13V/18V, IMax 300mA).
3. Adjust Dish: Slowly adjust the azimuth and elevation of your satellite dish. Observe the signal strength and quality readings on the LCD screen. The device provides a digital meter for both signal strength and quality (BER, PWR).
4. Locking Signal: When a strong signal is detected, the device will emit a sound alarm and/or light alarm, indicating a locked signal. Fine-tune the dish for the highest possible signal quality.
5. DISEQC and 22KHz Tone: The WS-6933 supports DISEQC 1.0/1.1 and 22KHz Tone. Configure these settings in the 'Sat Setting' menu if your setup requires them.
6. Mechanical Compass: Utilize the integrated mechanical compass for initial dish alignment, especially for determining the correct azimuth.

3. נאָך פֿעיִקייטן

• LNB Short Protect: The device features LNB short circuit protection to prevent damage.
• Beep Integrated: Audible feedback for signal locking and navigation.
• Auto Calculate Angle of AZ, EL: The device can assist in calculating the approximate azimuth and elevation angles for your location.

וישאַלט

1. Software Upgrades

The WS-6933 supports software upgrades via its USB port. Periodically check the ROROLL official website for the latest firmware versions. To upgrade:

1. אראפקאפיע די לעצטע פירמוואַרע file צו דיין קאָמפּיוטער.
2. Connect the WS-6933 to your computer using the provided USB cable.
3. Follow the instructions provided with the firmware update package to complete the upgrade.

2. רייניקונג און סטאָרידזש

• רייניקט דעם אַפּאַראַט מיט אַ ווייכן, טרוקענעם שטאָף. ניצט נישט קיין פליסיקע רייניגער אָדער סאָלווענטן.
• האַלט דעם אַפּאַראַט אין אַ קיל, טרוקן אָרט אַוועק פון דירעקט זונשייַן און עקסטרעמע טעמפּעראַטורן.
• If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan. Recharge every few months.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or visit the official ROROLL webזייטל. האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן פֿאַר קיין וואָראַנטי קליימז.

If you encounter issues not covered in this manual, please contact ROROLL customer service for assistance.