ראָבאָטיים סי-האָרס באַרק MCB02 3D האָלץ רעטעניש אינסטרוקציע מאַנואַל

הקדמה

Thank you for choosing the ROBOTIME Seahorse Barque MCB02 3D Wooden Puzzle. This kit allows you to construct a detailed 1:100 scale model of a classic three-masted sailing ship. Designed for adults and older children, this puzzle provides an engaging and rewarding building experience. Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable process.

זיכערקייַט אינפֿאָרמאַציע

Warning: Not suitable for children under 3 years due to small parts which may present a choking hazard.

• Keep all parts out of reach of small children.
• Exercise caution when detaching pieces from the wooden sheets to avoid splinters or breakage.
• פּאָטער פון פּאַקקאַגינג מאַטעריאַלס ריספּאַנסאַבלי.

פּעקל אינהאַלט

Your ROBOTIME Seahorse Barque MCB02 kit includes:

• 603 wooden puzzle pieces (on laser-cut sheets)
• פֿאַרזאַמלונג ינסטראַקשאַנז מאַנואַל
• Additional components (e.g., screws, fabric sails, etc., as required for the model)

Image: Layout of laser-cut wooden puzzle sheets and various components for the Seahorse Barque MCB02 kit.

אַסעמבלי אינסטרוקציעס

Assembly of the Seahorse Barque MCB02 typically takes approximately 10 hours. Follow the detailed step-by-step instructions provided in the included manual. Here are some general tips:

1. צוגרייטונג: Lay out all wooden sheets and identify the parts. Refer to the manual for part numbers. Work on a clean, well-lit surface.
2. אָפּטיילן שטיקלעך: Carefully detach each piece from its wooden sheet. If a piece is difficult to remove, use a craft knife or sandpaper to gently loosen it. Detach pieces by pushing them out from the side opposite any printed markings to minimize visible damage.
3. סאַנדינג: Lightly sand the edges of detached pieces if necessary to ensure a smooth fit and remove any small burrs from the laser cutting.
4. גיי די מאַנואַל: The included manual provides detailed diagrams and instructions for each step. Pay close attention to the orientation of pieces and the order of assembly.
5. פֿאַרבינדנדיקע שטיקלעך: Pieces are designed to fit together snugly. Apply gentle, even pressure. If a connection is too tight, do not force it; instead, lightly sand the edges of the connecting tabs.
6. Sails and Rigging: The kit includes 13 sails (8 square and 5 triangular) and rigging components. Follow the manual for proper attachment and tensioning to achieve the authentic look of a sailing ship.
7. דעקאָראַטיווע עלעמענטן: The model features 26 golden decorative elements and a golden seahorse figurehead. Attach these as indicated in the manual to enhance the ship's appearance.

Image: Hands assembling wooden puzzle pieces on a table with the instruction manual open.

Operating Instructions (Display)

Once assembled, your ROBOTIME Seahorse Barque MCB02 is a static display model. It features a rotating rudder and adjustable sails for dynamic posing. Place it on a stable, flat surface away from direct sunlight and excessive humidity to preserve its wooden components.

Image: The fully assembled ROBOTIME Seahorse Barque MCB02 3D wooden puzzle model.

זאָרגן און וישאַלט

• רייניקונג: שטויבט אָפּ דאָס מאָדעל רעגולער מיט אַ ווייכן, טרוקענעם שטאָף אָדער אַ ווייכן באַרשט. פֿאַרמייַדט צו נוצן וואַסער אָדער כעמישע רייניקונגסמיטלען, ווײַל די קענען שאַטן דאָס האָלץ.
• סוויווע: Keep the model in a stable environment, avoiding extreme temperature changes or high humidity, which can cause the wood to warp or crack.
• האַנדלינג: Handle the model with care, especially delicate parts like the rigging and sails.

טראָובלעשאָאָטינג עצות

• Pieces don't fit: If pieces are too tight, gently sand the connecting tabs. If too loose, a small amount of wood glue can be used (not included).
• צעבראכענע שטיק: In case of minor breakage, wood glue can often repair the piece. If a critical piece is severely damaged, contact customer support for possible replacements.
• פעלנדיקע שטיקלעך: Double-check all wooden sheets and packaging. If a piece is genuinely missing, contact customer support.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

דער פּראָדוקט קומט מיט אַ 2-יאָר פאַבריקאַנט ס וואָראַנטי. For any questions, missing parts, or support needs, please contact ROBOTIME customer service through their official channels or the retailer where the product was purchased.

איר קענט באַזוכן דעם אפיציעלן ראָבאָטיים קראָם פֿאַר מער אינפֿאָרמאַציע: ROBOTIME Store