Tyger Auto Tyger Access Running Boards Instruction Manual

1. פּראָדוקט איבערview

The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.

This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.

Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.

2. Fitment Information

These running boards are specifically designed for:

• פאָרמיטל: 2024-2026 טויאָטאַ טאַקאָמאַ
• קאַב טיפּ: Double Cab (4 full-size doors)
• קאַמפּאַטאַבילאַטי: Includes Hybrid models

Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.

Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.

3. סעטאַפּ און ייַנמאָנטירונג

3.1. אַרייַנגערעכנט קאַמפּאָונאַנץ

איידער איר הייבט אן די אינסטאַלאַציע, זאָלט איר זיכער מאַכן אַז אַלע קאָמפּאָנענטן זענען פאַראַן:

• דרייווער זייַט פליסנדיק באָרד
• פּאַסאַזשיר זייַט פליסנדיק באָרד
• All necessary hardware and mounting brackets
• ינסטאַללאַטיאָן גייד (דעם דאָקומענט)

3.2. ינסטאַלירונג סטעפּס

Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.

1. צוגרייטן פאָרמיטל: פּאַרק דיין פאָרמיטל אויף אַ גלייַך ייבערפלאַך און דינגען די פּאַרקינג טאָרמאָז.
2. אידענטיפיצירן בארג-פונקטן: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
3. צוטשעפּען בראַקאַץ: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
4. Position Running Board: Carefully lift and align the running board with the attached brackets.
5. Secure Running Board: Attach the running board to the brackets using the remaining hardware.
6. צופּאַסן און אָנשטרייכן: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
7. איבערחזרן פֿאַר דער אַנדערער זײַט: Follow the same steps for the opposite side of the vehicle.

Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.

4. אַפּערייטינג ינסטרוקטיאָנס

The Tyger Access Running Boards are designed for straightforward use. To operate:

• Ensure the running boards are securely installed before use.
• When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
• The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.

Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.

5. וישאַלט

To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:

• רעגולער רייניקונג: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
• דורכקוק: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
• ענדיק שוץ: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.

Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.

6. טראָובלעשאָאָטינג

If you encounter any issues with your running boards, consider the following:

• Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
• ומגעוויינטלעך נויזיז: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
• שוועריקייט צו ינסטאַלירן: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).

פֿאַר שטענדיקע פּראָבלעמען וואָס ווערן נישט געלעזט דורך די דאָזיקע טריט, ביטע קאָנטאַקטירט קונה שטיצע.

7. ספּעסאַפאַקיישאַנז

Image 7.1: Detailed dimensions of the Tyger Access Running Board.

Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.

8. וואָראַנטי אינפֿאָרמאַציע

Tyger Auto provides a 5 יאָר וואָראַנטי for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.

9. שטיצן

For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto website or contact their customer service department through the retailer where the product was purchased.

איר קענט געפֿינען מער אינפֿאָרמאַציע און קאָנטאַקט דעטאַלן אויף Tyger Auto Store on Amazon.