Asurity by Diversitech CP-22LPT Low Profile קאַנדאַנסייט פּאַמפּ באַניצער מאַנואַל

הקדמה

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Asurity by Diversitech CP-22LPT Low Profile Condensate Pump. This pump is designed to automatically evacuate condensate or water discharge from HVACR equipment, offering a vertical lift capability of up to 22 feet. Its low-profile design makes it suitable for installations in tight spaces.

זיכערקייַט אינפֿאָרמאַציע

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death.

• עלעקטריקאַל סכנה: Disconnect power before servicing. This unit operates on 110 Volts. Ensure all electrical connections comply with local codes.
• וואַסער סכנה: This pump handles water. Ensure proper drainage and prevent water damage.
• ייַנמאָנטירונג: Install the pump in a location where it is accessible for maintenance and inspection.
• בדעה באנוץ: Use this pump only for its intended purpose of evacuating condensate from HVACR equipment.
• UL ליסטעד: This product is UL listed, meeting electrical and mechanical safety standards for water pumps.

פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:

• Asurity by Diversitech CP-22LPT Condensate Pump
• 20 ft Clear Vinyl Tubing
• 4 ft Safety Switch Wire (pigtail)

פּראָדוקט איבערview

The Asurity CP-22LPT condensate pump features a compact design with advanced functionalities for reliable condensate removal.

בילד 1: The Asurity CP-22LPT low profile condensate pump shown with the included clear vinyl tubing. The pump features a red base and a black motor housing with ventilation slots and an outlet port.

בילד 2: א אויבן-אַראָפּ view of the Asurity CP-22LPT condensate pump, accompanied by the coiled clear vinyl tubing and the yellow safety switch wire. This image highlights all primary components included with the unit.

בילד 3: A side perspective of the Asurity CP-22LPT condensate pump, illustrating its low-profile design. This view emphasizes the compact dimensions suitable for installation in confined spaces.

שליסל פֿעיִקייטן:

• LED Status Indicator Lights (Power, Run, Alarm)
• ווייבריישאַן דampening System for quiet operation
• Integrated Safety Switch with 4 feet of wire for air-handler shutdown
• נידעריק פּראָfile design for tight installations
• Metal mounting tabs for secure installation
• Four inlet holes (with 3 poly covers for unused ports)
• Float switch and duckbill-style check valve

סעטאַפּ און ינסטאַלירונג

Proper installation is crucial for the pump's performance and longevity. Ensure all local electrical and plumbing codes are followed.

1. אָרט: Position the pump on a level surface near the HVACR unit. The low-profile design is ideal for tight spaces. Utilize the vibration dampening feet and metal mounting tabs for secure placement.
2. Condensate Inlet Connection: Connect the condensate drain line from the HVACR unit to one of the pump's inlet holes. The pump has four inlet holes; seal any unused inlets with the provided poly covers.
3. Discharge Line Connection: Connect the 20 ft clear vinyl tubing to the pump's discharge outlet. Route the tubing upwards, ensuring it does not exceed the pump's 22 ft vertical lift capability, and then to a suitable drain point. Avoid kinks or sharp bends in the tubing. The integrated duckbill-style check valve prevents backflow.
4. עלעקטריקאַל קשר: Connect the pump to a dedicated 110V power supply. Ensure the power source is off before making connections.
5. זיכערהייט סוויטש קאַנעקשאַן: Connect the 4 ft safety switch wire (pigtail) to the air-handler's shutdown circuit. This feature is designed to shut down the HVACR unit if the pump fails or the water level rises too high, preventing overflow. Refer to your HVACR unit's manual for specific wiring instructions for the safety switch.
6. טעסט: After installation, manually pour water into the pump's reservoir to verify proper operation. The pump should activate, discharge the water, and then shut off. Check for any leaks.

אַפּערייטינג ינסטראַקשאַנז

The Asurity CP-22LPT condensate pump operates automatically once properly installed and powered.

• When condensate water enters the pump's reservoir and reaches a predetermined level, the internal float switch activates the pump.
• The pump will then discharge the water through the connected vinyl tubing to the designated drain.
• Once the water level drops, the float switch deactivates the pump.
• LED ינדיקאַטאָרס:
  • Pwr (Power): Illuminates when the pump is receiving electrical power.
  • לויפן: Illuminates when the pump motor is actively discharging water.
  • Alrm (Alarm): Illuminates if the water level rises to the high-level alarm switch, indicating a potential issue and activating the safety shutdown circuit.

וישאַלט

Regular maintenance ensures optimal performance and extends the life of your condensate pump.

• כוידעשלעך דורכקוק: Check the pump reservoir for sludge, mold, or debris. Clean as necessary.
• רייניקונג: Disconnect power before cleaning. Remove the pump cover and clean the reservoir with a mild detergent and water. Ensure the float switch moves freely.
• אויסלאָז ליניע: Inspect the vinyl tubing for blockages, kinks, or leaks. Clear any obstructions.
• אריינגאנג פּאָרטן: Ensure inlet ports are clear of debris.

טראָובלעשאָאָטינג

זעט די פאלגנדע טאבעלע פאר אלגעמיינע פראבלעמען און זייערע לייזונגען.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

For warranty information or technical support, please contact Diversitech customer service. Keep your purchase receipt for warranty claims.

פאַבריקאַנט: דיווערסיטעטש

Webפּלאַץ: www.diversitech.com

קאָנטאַקט: זעט די פאבריקאנט'ס webזייטל פֿאַר איצטיקע קאָנטאַקט אינפֿאָרמאַציע.