GODIYMODULES ZK-SMC02 DC 5-30V 4A Stepper Motor Driver and Controller User Manual

1. הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of the GODIYMODULES ZK-SMC02 DC 5-30V 4A Stepper Motor Driver and Controller. This integrated unit combines a stepper motor controller and driver, offering features such as adjustable delay, speed regulation, angle adjustment, and distance control. It supports both automatic and manual operation, includes a physical button interface, an LCD display, and TTL serial communication capabilities.

Figure 1.1: GODIYMODULES ZK-SMC02 Stepper Motor Driver and Controller.

2. זיכערקייַט אינפֿאָרמאַציע

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

פאַרזיכערן די מאַכט צושטעלן וואָלtage is within the specified range of DC 5-30V.
נישט איבערשטייגן די מאקסימום קראַנט ראַנג פון 4A.
Disconnect power before making any wiring connections or disconnections.
Avoid exposing the device to moisture, extreme temperatures, or corrosive environments.
פרובירט נישט צו צענעמען אדער מאדיפיצירן דעם אפאראט. לאָזט איבער אלע סערוויסעס צו קוואַליפֿיצירטע פּערסאָנעל.
פאַרזיכערן געהעריק ווענאַליישאַן צו פאַרמייַדן אָוווערכיטינג.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:

1 x ZK-SMC02 Stepper Motor Driver and Controller

4. ספּעסאַפאַקיישאַנז

שטריך	באַשרייַבונג
מאָדעל	ZK-SMC02
אַרייַנשרייַב וואָלtage	דק 5-30V
מאַקס קראַנט	4A
ווייַז טיפּ	לקד
קאָמוניקאַציע	TTL Serial Communication
דימענשאַנז (פּאַקאַץ)	5.51 X 3.74 X 2.28 אינטשעס
פּונקט וואָג	3.2 אונסעס
מאַטעריאַל	פּלאַסטיק

5. פּראָדוקט איבערview

The ZK-SMC02 features an intuitive front panel with an LCD display, control buttons, and an encoder knob for easy operation and parameter adjustment.

Figure 5.1: Front Panel Controls and Indicators.

CW Button: Initiates forward (clockwise) rotation.
CCW Button: Initiates reverse (counter-clockwise) rotation.
לויפן/שטאָפּ קנעפּל: Starts or stops the motor. Also used to exit menu settings.
Encoder Setting Knob: Used to adjust speed, parameters, and navigate menus. Pressing the knob enters menu settings.
CW Indicator: Lights up when the motor is rotating clockwise.
CCW Indicator: Lights up when the motor is rotating counter-clockwise.
LCD ווייַז: Shows current speed, parameters, and menu options.

6. סעטאַפּ און וויירינג

Proper wiring is crucial for the correct operation of the ZK-SMC02. Refer to the diagram below for connection details.

Wiring diagram for ZK-SMC02 Stepper Motor Controller

Figure 6.1: Wiring Diagram for ZK-SMC02.

6.1 מאַכט סופּפּלי קאַנעקשאַן

Connect the DC 5-30V power supply to the DC+ און דק- טערמינאַלן. זיכער מאַכן די ריכטיקע פּאָלאַריטעט.

6.2 Stepper Motor Connection

Connect your stepper motor to the A+, A-, B+, B- terminals. Refer to your stepper motor's datasheet for correct phase connections.

6.3 Serial Communication (Optional)

For TTL serial communication, connect as follows:

GND: Connected to negative common terminal of driver.
ען: Connected to driver enable terminal.
דיר: Connected to driver direction input.
טקס: יבערשיקן דאַטן.
RX: באַקומען דאַטן.
+ 3.3 וו: Power output for external modules (if applicable).

7. אַפּערייטינג ינסטרוקטיאָנס

7.1 יקערדיק אָפּעראַציע

מאַכט אויף: Connect the power supply. The LCD will display the current operating mode or speed.
סטרויערן גיכקייַט: In the operation interface, rotate the encoder knob to adjust the motor speed.
Forward Rotation (CW): דרוק די CW button. The CW indicator will light up.
Reverse Rotation (CCW): דרוק די CCW button. The CCW indicator will light up.
אָנהייב / האַלטן: דרוק די לויפן / האַלטן button to start or pause the motor.

7.2 מעניו סעטטינגס

To access and adjust advanced parameters, follow these steps:

Menu navigation and parameter adjustment for ZK-SMC02

Figure 7.1: Menu Navigation and Parameter Adjustment.

אַרייַן מעניו: Press and hold the encoder knob to enter the menu settings interface. The display will show 'F-01'.
נאַוויגירן פּאַראַמעטערס: In the menu settings interface, rotate the encoder knob to change the parameter codes from F-01 to F-13.
Select Parameter for Adjustment: Short press the encoder knob to enter the F-XX corresponding menu parameter setting state. The parameter value will flash.
Adjust Parameter Value: Rotate the encoder knob to adjust the flashing parameter value.
היט און אַרויסגאַנג: Long press the encoder knob to save the parameters and exit to the running interface.
Exit Parameter Settings: קורץ דריקן די לויפן / האַלטן button to exit parameter settings and return to the main menu number adjustment interface.

7.3 Parameter Descriptions

The following table details the available parameters and their functions. Please note that the image for this table was not provided with a distinct URL in the JSON, so the content is transcribed for clarity.

סיריאַל נומער	פֿונקציע	אַדדזשוסטאַבלע ראַנגע	דיפאָלץ	Action Mode Selection (P01)
F-01	Action mode selection	1-9	1	[P01]->1: Motor works with knob on controller. It keeps rotating after pressing the button, and stops when it is released. [Press CW] Always rotate forward. [Press CCW] Always reverse. [P01]->2: After pressing the button, keep rotating, and press again to stop. [Press CW] Forward rotation. [Press CCW] Reverse rotation. [P01]->3: After pressing the button, it can rotate forward or reverse-delay according to the set distance, and it can cycle F-06 times. [Press CW] Forward rotation-Delay (F-07). [Press CCW] Reverse rotation-Delay (F-08). [P01]->4: After pressing the button, it can cycle according to the set distance f onward or reverse-delay (F-06). Return to zero at the end of the cycle. [Press CW] Forward rotation delay (F-07), Cycle (F-06), return to zero. [Press CCW] Reverse rotation-Delay (F-08), Cycle (F-06), return to zero. [P01]->5: After pressing the button, cycle forward and reverse according to the set distance. Abbreviations: [Press CW] forward delay (F-07) - reverse delay (F-08), [press CCW] reverse delay (F-08) - forward delay (F-07), above cycle (F-06). [P01]->6: After pressing the button, the motor will rotate forward or reverse permanently, release the button - delay - return to zero. Abbreviations: [press CW] forward rotation - release - delay (F-07) - return to zero. [Press CCW] reverse rotation - release - delay (F-08) - return to zero. [P01]->7: After pressing the button, forward or reverse - delay according to the set time. Recyclable (F-06). Abbreviations: [press CW] forward rotation time (F-07) - delay (F-08), [press CCW] reverse rotation time (F-08) - delay (F-07), the above cycle (F-06). [P01]->8: After power on, it will automatically cycle forward and reverse according to the set distance. Abbreviations: forward delay (F-07) - reverse delay (F-08), cycle (F-06). [P01]->9: After power on, it will automatically cycle forward and reverse according to the set distance. Abbreviations: forward delay (F-07) - reverse delay (F-08), cycle (F-06).
F-02	Number of forward rotation pulses	1-9999	1600	Unit: Number
F-03	פאָרווערטס ראָטאַציע גיכקייט	1-999	1	Unit: Revolution / minute
F-04	Number of reverse pulses	1-9999	1600	Unit: Number
F-05	Reversal speed	0.1-999	10	Unit: Circle revolution/min
F-06	Cycle work times (among them - numerous times)	0-9999 or countless times	1	Unit: Times
F-07	Forward rotation in place delay	0.0-999.9	0.0	Unit: Second (accuracy ±0.2 second)
F-08	פאַרקערט אין פּלאַץ פאַרהאַלטונג	0.0-999.9	0.0	Unit: Second (accuracy ±0.2 second)
F-09	נומער פון פּולסן פּער רעוואָלוציע	1-9999 (X10)	160	פֿאַר עקסample, the step angle is 1.8 degrees, the stepping motor drives 8 segments, and one revolution is 360 / 1.8 * 8 = 1600, setting 160, actual 1600.
F-10	הויפּט צובינד אַרויסווייַזן אינהאַלט	00-01	00	00: Motor coil speed (unit: RPM) 01: Downlink delay time (unit: s) / number of cycles (unit: Times)
F-11	Action when pressing pause key	0-1	0	0: Slow stop of motor deceleration 1: Motor stops immediately (emergency stop has impact)
F-12	Acceleration and deceleration level	1-100	20	1 slowest, 100 fastest
F-13	פּאָסט אַדרעס	1-255	1

8. וישאַלט

To ensure the longevity and optimal performance of your ZK-SMC02 controller, follow these maintenance guidelines:

האַלט דעם אַפּאַראַט ריין און פֿרײַ פֿון שטויב און שמוץ. ניצט אַ ווייכן, טרוקענעם שטאָף פֿאַר רייניקונג.
Avoid exposing the device to direct sunlight or high humidity.
קאָנטראָלירט רעגולער אַלע וויירינג פֿאַרבינדונגען צו זיכער מאַכן אַז זיי זענען זיכער.
דו זאלסט נישט נוצן האַרב קעמיקאַלז אָדער אַברייסיוו קלינערז אויף די מיטל.

9. טראָובלעשאָאָטינג

If you encounter issues with your ZK-SMC02, refer to the following common problems and solutions:

Motor not moving:
- קאָנטראָלירט די קאַנעקשאַנז פון די מאַכט צושטעל און זיכערט זיך אַז די וואָלומעןtage איז אינערהאלב 5-30V.
- Verify stepper motor wiring (A+, A-, B+, B-).
- Ensure the motor is not in a paused state (press RUN/STOP).
- Check parameter F-01 for correct action mode selection.
Incorrect speed or direction:
- Adjust speed using the encoder knob.
- Verify CW/CCW button presses.
- Check parameters F-03 (forward speed) and F-05 (reversal speed).
- Ensure F-09 (pulses per revolution) is set correctly for your motor.
דיספּליי אַרבעט נישט:
- קוק די מאַכט צושטעלן.
- קאָנטאַקט קונה שטיצן אויב די פּראָבלעם האלט.

10. וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the product's purchase platform or contact GODIYMODULES customer service directly. Keep your purchase receipt for warranty claims.