Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set Instruction Manual

1. פּראָדוקט איבערview

The Audio Array AM-W20 is a magnetic wireless lapel microphone set designed for high-fidelity audio recording. It features one-touch smart noise reduction, 48KHz/24Bit Hi-fi recording capabilities, a 50-meter wireless range, and an 800mAh battery providing up to 48 hours of operation with the charging case. This microphone is suitable for various applications including vlogging, podcasting, and streaming.

Image: The Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set, including the transmitter, receiver, and charging case.

שליסל פֿעיִקייטן:

• הויך-פאַדעליטי רעקאָרדינג: 48kHz/24bit audio capture with a 70dB signal-to-noise ratio.
• Smart Noise Reduction: One-touch activation for clear voice recordings in noisy environments.
• עקסטענדעד ווירעלעסס קייט: Up to 50 meters (164 feet) of uninterrupted working range.
• לאנג באַטאַרייע לעבן: Up to 4 hours on a single charge, and up to 48 hours with the charging case.
• וניווערסאַל קאַמפּאַטאַבילאַטי: Supports iOS (with Type-C to Lightning adapter) and Android devices (Type-C/USB-C ports) with OTG support.
• Magnetic Clip Design: Allows for versatile and secure positioning.

Image: Visual representation of the AM-W20's key features, including compatibility, magnetic clip, wireless technology, audio quality, range, battery life, and noise cancellation.

2. סעטאַפּ אינסטרוקציעס

2.1 ערשטע פּאָרינג און פֿאַרבינדונג

The Audio Array AM-W20 system is pre-paired at the factory for immediate use. No manual pairing is required for initial setup.

1. לאָד די דעוויסעס: Ensure both the transmitter (TX) and receiver (RX) are fully charged using the provided charging case.
2. פאַרבינדן די ופנעמער: Plug the receiver (RX) into the Type-C or USB-C port of your recording device (smartphone, tablet, etc.). For iOS devices, use the included Type-C to Lightning adapter.
3. מאַכט אויף טראַנסמיטער: Take the transmitter (TX) out of the charging case. It will automatically power on and connect to the receiver.
4. באַשטעטיקן קשר: A solid indicator light on both the transmitter and receiver typically signifies a successful connection.

Image: Visual guide demonstrating the three-step plug-and-play connection process: 1. Plug in the receiver, 2. Turn on the transmitter, 3. Devices are connected.

2.2 Device Compatibility and OTG Function

The AM-W20 is compatible with a wide range of devices, including iPhones, iPads, and Android smartphones/tablets with Type-C or USB-C ports. OTG (On-The-Go) support is essential for Android devices.

• יאָס דעוויסעס: Use the provided Type-C to Lightning adapter.
• אַנדרויד דעוויסעס: Ensure your device supports OTG. Some Android smartphones require you to manually enable the OTG function in their settings for external microphones to work correctly.

Image: Illustration of the AM-W20's broad compatibility with various mobile devices and applications.

Image: Guide for Android users on enabling OTG and configuring the 'Open Camera' app for external microphone use.

3. אַפּערייטינג ינסטרוקטיאָנס

3.1 מאַכט אויף / אַוועק

The transmitter (TX) automatically powers on when removed from the charging case. To manually power on or off, press and hold the power button on the transmitter.

3.2 Noise Cancellation (ANC Mode)

The AM-W20 features a smart noise reduction function to minimize background interference.

• אַקטאַוויישאַן: Press the yellow button on the transmitter once to activate noise cancellation. A green indicator light will illuminate on the transmitter.
• דיאַקטיוויישאַן: Press the yellow button again to deactivate noise cancellation.
• אָטאַמאַטיק אַקטאַוויישאַן: Noise cancellation is active automatically when the transmitter is turned on.

Image: The AM-W20 transmitter highlighting the yellow button for one-tap noise cancellation.

3.3 שטום פֿונקציע

To temporarily mute the microphone during recording:

• אַקטיוואַציע/דעאַקטיוואַציע: Double-tap the power button on the transmitter.

Image: Explanation of Audio Modes, showing single tap for ANC and double tap for Mute.

3.4 Microphone Positioning

The AM-W20 features a magnetic clip for flexible and secure attachment.

• מאַגנעטיק אַטאַטשמאַנט: Use the magnetic clip to attach the microphone to clothing or other surfaces.
• אָפּטימאַל אָרט: For best audio quality, position the microphone approximately 6-8 inches (15-20 cm) below your mouth, centered on your chest. Avoid placing it directly under your chin or too close to your mouth to prevent plosives and distortion.

Image: Demonstrates various ways to wear the microphone, including magnetic attachment, necklace style, and traditional clip.

4. וישאַלט

4.1 Charging the Microphone Set

The AM-W20 microphone set is powered by an internal rechargeable battery. The charging case provides extended battery life.

• Transmitter Battery Life: אַרויף צו 4 שעה אויף אַ איין אָפּצאָל.
• Total Battery Life with Case: אַרויף צו 48 שעה.
• טשאַרדזשינג: Place the transmitter and receiver into the charging case. Connect the charging case to a power source using a standard USB-C cable. The indicator lights on the case will show the charging status.

Image: Visual display of the AM-W20's battery performance, indicating 4 hours of use per charge and 48 hours with the charging case.

4.2 רייניקונג און סטאָרידזש

• רייניקונג: Use a soft, dry cloth to clean the microphone and charging case. Avoid using liquids or abrasive cleaners.
• סטאָרידזש: Store the microphone set in its charging case in a cool, dry place away from direct sunlight and extreme temperatures.

5. טראָובלעשאָאָטינג

If you encounter issues with your Audio Array AM-W20, refer to the following common troubleshooting steps:

• Microphone Disconnects:
  • Ensure the receiver is securely plugged into your device.
  • Check the battery level of both the transmitter and receiver.
  • Verify that there are no significant obstacles or sources of interference within the 50-meter range.
  • For Android devices, confirm that the OTG function is enabled in your phone's settings.
• Poor Audio Quality / Disturbance / Shrieking Sound:
  • ראַש קאַנסאַליישאַן: Ensure noise cancellation is activated (green light on TX). If recording in extremely noisy environments, some residual noise may still be present.
  • מיקראָפאָן אָרט: Avoid placing the microphone too close to your mouth or directly under your chin. Optimal placement is typically 6-8 inches below the mouth.
  • רעקאָרדינג באַנד: If experiencing a shrieking sound, the input volume might be too high. Adjust the recording volume settings on your device if possible.
  • ינטערפיראַנס: גייט אַוועק פון אַנדערע וויירלעס דעוויסעס אָדער שטאַרקע עלעקטראָמאַגנעטישע פעלדער וואָס קענען פאַרשאַפן שטערונג.
• טשאַרדזשינג ישוז:
  • Ensure the USB-C charging cable is fully inserted into both the charging case and the power adapter.
  • Try a different USB-C cable and power adapter to rule out faulty accessories.
  • Check for any debris in the charging ports of the case or devices.
• No Sound Recording (Android):
  • Enable OTG in your phone's settings.
  • Use a third-party camera app like 'Open Camera' and ensure 'External mic' is selected as the audio source in its settings.

6. ספּעסאַפאַקיישאַנז

7. וואָראַנטי און שטיצן

For product support, technical assistance, or warranty inquiries, please contact Audio Array customer service using the information below:

• טעלעפֿאָן: +91 9372146440
• בליצפּאָסט: support@audioarray.in

Image: Audio Array customer support details, including phone number and email for assistance.

ביטע באַהאַלטן אייער קויפן-באַווייַז פֿאַר יעדע וואָראַנטי-פאָדערונג.