עדיפייער MR3 סטודיאָ מאָניטאָר רעדנער באַניצער מאַנואַל

1. הקדמה

א דאנק פארן קויפןasing the Edifier MR3 Studio Monitor Speakers. This manual provides essential information for setting up, operating, and maintaining your speakers to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

2. שליסל פֿעיִקייטן

• Accurate Sound Reproduction: Designed for precise audio detail and nuance, ideal for home studios, video editing, and daily listening.
• פלאַך אָפטקייַט ענטפער: Covers a wide range from 52 Hz to 40 kHz, delivering neutral and transparent sound. The dimple tweeter waveguide ensures extended high-frequency response and a wider listening area.
• הויך-האַכלאָטע אַודיאָ: Equipped with Texas Instruments analog audio front-end and Class D audio amplifier, operating at 24 bit/96 kHz for perfect audio conversion and ampליפיקאַטיאָן.
• צימער קארעקציע: Multiple room correction settings available via the rear knob and the 'Edifier ConneX' app, adapting to various room modes for an optimized listening experience.
• שטאַרק רעזולטאַט: Features 3.5-inch mid-low drivers and 1-inch silk dome tweeters, delivering a total output of 18W*2 (RMS) and 92.5dB SPL (peak @ 1 meter), suitable for near-field listening and filling medium-sized rooms.
• ווערסאַטאַל קאַנעקטיוויטי: Includes TRS balanced input for low-noise signal transmission (ideal for audio interfaces/mixers), RCA, and AUX inputs for connecting multiple audio devices.
• Multi-point Bluetooth 5.4: Supports the latest Bluetooth 5.4 for faster, more stable connections, and allows simultaneous connection to two devices.
• Dedicated App Control: The 'Edifier ConneX' app unlocks additional features and customization options.

3. סעטאַפּ גייד

3.1 ונבאָקסינג

פֿאָרזיכטיק אויספּאַקן אַלע קאָמפּאָנענטן און זיכער מאַכן אַז אַלץ איז דאָ:

• Edifier MR3 Speakers (1 pair)
• מאַכט קאַבלע
• רעדנער קאַנעקשאַן קאַבלע
• 3.5mm-RCA Audio Cable
• 3.5 מם-3.5 מם אַודיאָ קאַבלע
• שנעל אָנהייב גייד
• וויכטיק סאַפעטי אינפֿאָרמאַציע

Image: Edifier MR3 speakers and included accessories, including power cable, speaker cable, 3.5mm-RCA cable, 3.5mm-3.5mm cable, quick start guide, and safety information.

3.2 רעדנער פּלייסמאַנט

Optimal speaker placement is crucial for sound quality. Consider the following:

• Listening Triangle: Position the two speakers and your listening point to form an equilateral triangle (60 degrees).
• דיסטאַנץ פֿון ווענט: Ideally, place speakers at least 1.5 meters away from walls to prevent bass buildup.
• סימעטריע: Place speakers symmetrically to your listening position.
• Tweeter Height: Position tweeters at ear level (typically 1.2m to 1.4m).
• ווערטיקאַל אָריענטירונג: Always place speakers vertically (avoid horizontal placement).
• צימער אַקוסטיק: Use appropriate room acoustic treatment to reduce interference from direct and reflected sound.
• Standing Waves: Adjust speaker position to minimize the effect of room standing waves.

Image: Diagram illustrating optimal speaker placement, including equilateral triangle setup, distance from walls, tweeter height, and vertical orientation.

3.3 מאַכט אויף / אַוועק

• צו מאַכט אויף: Press the volume knob on the front panel.
• צו מאַכט אַוועק: Press and hold the volume knob for 1.5 seconds.
• מאַכט שפּאָרן מאָדע: The speakers will enter power-saving mode if no audio is played or no operation is performed for 15 minutes (Bluetooth device connected). If no Bluetooth device is connected and no operation for 15 minutes, the speakers will power off. This feature is enabled by default. To disable/re-enable, turn the volume to 0 and press the volume knob twice. The indicator will flash once for disabled, twice for enabled.

4. קאַנעקשאַנז

4.1 ווייערד קאַנעקשאַנז

The MR3 speakers offer a variety of wired input options:

• TRS Balanced Input: Provides noise-free signal transmission, ideal for connecting to professional audio interfaces or mixing consoles.
• RCA אַרייַנשרייַב: For connecting devices with RCA outputs, such as turntables or CD players.
• AUX אַרייַנשרייַב: A versatile 3.5mm input for connecting various audio sources like computers, smartphones, or older audio equipment.

Image: Rear panel of the Edifier MR3 speaker, highlighting TRS balanced inputs, RCA unbalanced inputs, and speaker output terminals. Also shows the AUX input on the front.

4.2 בלועטאָאָטה קאַנעקשאַן

The MR3 supports Bluetooth 5.4 with multi-point connectivity, allowing two devices to be connected simultaneously.

• איין דיווייס קאַנעקשאַן:
  1. Ensure no device is currently connected via Bluetooth.
  2. Press the Bluetooth function button on the rear panel. The indicator will flash rapidly, indicating pairing mode. If it doesn't enter pairing mode, press and hold the Bluetooth button for 1.5 seconds.
  3. On your device, search for 'EDIFIER MR3' in the Bluetooth device list and select it to connect. The indicator will glow steadily once connected.
• Multi-point Connection (Two Devices):
  1. Connect the first device as described above.
  2. Press and hold the Bluetooth function button for 1.5 seconds to enter pairing mode again. The indicator will flash rapidly.
  3. On your second device, search for 'EDIFIER MR3' and connect.
  4. To play audio from one device, pause playback on the other.
• Bluetooth Hidden Mode: If no device is connected for 3 minutes, the speaker will enter Bluetooth hidden mode. In this mode, new devices cannot discover the speaker, but previously paired devices can reconnect by selecting 'EDIFIER MR3' from their Bluetooth list. To exit hidden mode, press the Bluetooth function button.

Image: A close-up of a Bluetooth 5.4 chip on a circuit board, representing the advanced wireless connectivity of the Edifier MR3.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1 Sound Mode Switching

Press the volume knob to cycle through the sound modes:

• רויט ינדיקאַטאָר: Monitor Mode (flat frequency response for critical listening)
• גרין ינדיקאַטאָר: Music Mode (enhanced for general music enjoyment)
• White Indicator: Customize Mode (user-defined settings via the app)

5.2 Using the Edifier ConneX App

The 'Edifier ConneX' app provides advanced control and customization for your MR3 speakers.

• אראפקאפיע: Scan the QR code in the Quick Start Guide or on the package, or search for 'Edifier ConneX' on the App Store or Google Play.
• פאַרבינדן: Connect your device to the speaker via Bluetooth.
• פֿעיִקייטן: The app allows you to adjust volume, switch sound effects, customize EQ, and access room correction settings.

Image: A smartphone screen showing the Edifier ConneX app, with options for sound effects, volume control, and other settings for the MR3 speakers.

5.3 Audio Tuning (Room Correction)

The 'Acoustic Tuning' interface in the app allows you to modify settings based on your room environment:

• נידעריקע קאַטאָף: Reduces low frequencies (20-100 Hz) based on room size and shape. Attenuation levels can be set at 6, 12, 18, or 24 dB/octave.
• אַקוסטיש פּלאַץ: Adjusts the bass boost based on speaker placement (e.g., 0dB for center, -2dB for wall side, -4dB for corner).
• Desktop Control: Compensates for sound reflections when speakers are placed on a desktop. This feature helps mitigate the effect of increased decibel levels at certain frequencies due to desktop placement.

Image: The Edifier ConneX app's 'Acoustic Tuning' screen, displaying controls for Low Cutoff, Acoustic Space, and Desktop Control, with corresponding frequency response graphs.

You can also adjust high and low-frequency gains using the physical knobs on the rear panel:

• 'High' Knob: Adjusts frequencies above 10kHz by +/- 6dB.
• 'Low' Knob: Adjusts frequencies around 125Hz by +/- 6dB.

5.4 כעדפאָון רעזולטאַט

To use headphones, connect them to the 3.5mm headphone jack on the front panel. When headphones are connected, the speaker output will be muted. The headphone volume can be adjusted using the speaker's volume knob.

6. טראָובלעשאָאָטינג

If you encounter any issues with your Edifier MR3 speakers, please refer to the following common solutions:

• קיין מאַכט: Ensure the power cable is securely connected and the speaker is turned on (press the volume knob). Check the power outlet.
• קיין קול: Verify that the correct input source is selected. Check all audio cable connections. Ensure the volume is not muted or too low. If using Bluetooth, ensure the device is paired and connected.
• פאַרקרימט סאָונד: Reduce the volume of the source device and the speaker. Check for loose connections. Ensure the audio source is not overdriven.
• בלועטאָאָטה פּערינג ישוז: Ensure the speaker is in pairing mode (flashing indicator). Turn off and on your device's Bluetooth. Try forgetting the speaker from your device's Bluetooth list and re-pairing.
• אַפּ קאַנעקטיוויטי ישוז: Ensure Bluetooth is enabled and the speaker is connected to your device. Restart the app and try again.

If the problem persists, please contact Edifier customer support for assistance.

7. ספּעסאַפאַקיישאַנז

8. פאַבריק באַשטעטיק

If needed, you can reset your speakers to their factory default settings via the 'Edifier ConneX' app:

1. Open the 'Edifier ConneX' app.
2. Navigate to 'My Device' and select 'Initialize'.
3. באַשטעטיקן די באַשטעטיק קאַמף.

9. פּראָדוקט ווידעאָס

10. וואָראַנטי און שטיצן

Edifier products come with a limited warranty. Please refer to the 'Important Safety Information' document included in your package for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or service inquiries, please visit the official Edifier webזייטל אדער קאָנטאַקט אייער לאקאלן דיסטריביאַטאָר.