KRAUS CleanMate Glass Rinser KGR-500SFS Instruction Manual

1. הקדמה

The KRAUS CleanMate Glass Rinser is designed to simplify your kitchen routine by providing a quick and convenient way to rinse glasses, bottles, and large tumblers. Its powerful jets reach areas that are difficult to clean by hand, ensuring a thorough rinse. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your glass rinser.

Image: KRAUS CleanMate Glass Rinser in Spot-Free Stainless Steel, ready for use next to a kitchen sink.

2. זיכערקייַט אינפֿאָרמאַציע

ביטע ליינט אלע אינסטרוקציעס קערפול דורך איידער איר אינסטאלירט און ניצט עס. האלט דעם מאנואל פאר שפעטערדיגע רעפערענץ.

• The glass rinser features an integrated 1/8-turn safety lock to prevent accidental activation and protect surrounding areas from splashes.
• The unit is constructed from דוראַבאַל אַבס פּלאַסטיק. For water connections, some users have suggested replacing the provided plastic tee fitting with a metal or brass alternative for enhanced durability and leak prevention.
• זיכער מאַכן אַז אַלע פֿאַרבינדונגען זענען זיכער צו פאַרמייַדן ליקס.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:

• Glass Rinser Unit
• Quick-Connect Water Line (42-inch nylon)
• טי קאַנעקטער
• Optional Spacer (for sinks with raised ledges)
• גומע וואַשער
• מעטאַל וואַשער
• מאָונטינג נוט

בילד: עקספּלאָדירט view diagram showing the glass rinser, quick-connect water line, mounting shank, washer/spacer, mounting nut, and tee adapter.

4. סעטאַפּ און ייַנמאָנטירונג

The KRAUS CleanMate Glass Rinser is designed for easy DIY installation, typically replacing an unused accessory like a soap dispenser. It fits into a 1-1/4 inch accessory hole and accommodates decks up to 2-1/4 inches thick with limited backsplash clearance.

4.1. פאַר-ינסטאַלירונג טשעקס

• Ensure you have the necessary tools: a 5/8" wrench, a 7/8" wrench, and a Phillips head screwdriver.
• Confirm your sink has an available 1-1/4 inch diameter hole.
• Turn off the water supply to your sink before starting installation.

4.2. ינסטאַלירונג סטעפּס

1. צוגרייטן דעם לאָך: If replacing an existing accessory, remove it. Clean the area around the hole on your countertop.
2. Assemble the Rinser: Insert the rinser's stem through the countertop hole. Ensure the rubber washer is positioned correctly between the rinser base and the countertop.
3. Secure the Rinser: From underneath the sink, slide the metal washer and then the mounting nut onto the stem. Tighten the mounting nut securely to hold the rinser in place.
4. Connect the Tee Connector: Attach the supplied tee connector to your cold or hot water supply line under the sink. Ensure to use Teflon tape on threaded connections for a watertight seal.
5. Connect Water Line to Rinser: Attach one end of the quick-connect water line to the tee connector and the other end to the rinser's stem underneath the sink. Hand-tighten, then use a wrench for a final snug fit.
6. טעסט פֿאַר ליקס: Slowly turn the water supply back on and check all connections for leaks. Tighten any leaking connections as needed.

Image: Detailed dimensions of the KRAUS CleanMate Glass Rinser, showing overall height, length, width, rinser height, and water supply line length.

4.3. Installation Video Guides

5. אַפּערייטינג ינסטרוקטיאָנס

Using your KRAUS CleanMate Glass Rinser is simple and efficient:

1. Position the Drinkware: Place the opening of your glass, bottle, or tumbler over the rinser's 5-inch wide opening, ensuring it is centered over the spray nozzle. The 6 silicone-coated prongs will support delicate items.
2. Activate the Spray: Gently press down on the drinkware with a slight turning motion. This activates the 1/8-turn integrated safety lock and the 9 powerful jets.
3. שווענקען גאָר: The jets will deliver a targeted spray that reaches where you can't, blasting away residue for a thorough clean. Continue pressing for the desired rinse duration.
4. Release and Drain: Release pressure on the drinkware. The water will stop, and the sloped design will direct water over the sink for easy drainage, keeping your counters dry.

בילד: נאָענט-אַרויף view of the KRAUS CleanMate Glass Rinser demonstrating the 9 powerful jets spraying water inside a glass, showing before and after cleaning results.

Image: Series of images showing different types of drinkware, including wine glasses, tumblers, and baby bottles, being rinsed by the KRAUS CleanMate Glass Rinser, highlighting its 5-inch wide opening.

5.1. ווידעא אנווייזונג פארן אפערירן

6. וישאַלט

To keep your KRAUS CleanMate Glass Rinser in optimal condition:

• רייניקונג די ייבערפלאַך: The Spot-Free Stainless Steel finish resists water spots and fingerprints, making it easy to clean. Wipe down the surface regularly with a soft cloth and mild soap. Avoid abrasive cleaners.
• Cleaning the Rinser Head: The rinser head can be easily removed for cleaning. Simply lift it off the central post, clean any residue, and rinse thoroughly. Reattach by aligning it with the post.
• דריינאַדזש: The sloped design ensures efficient drainage. Periodically check the drainage area for any blockages and clear as needed.

Image: Comparison showing the KRAUS all-Brite Spot-Free Stainless Steel finish next to a standard finish, highlighting its resistance to water spots and fingerprints.

Image: Demonstrates the durable ABS plastic construction and sloped design of the KRAUS CleanMate Glass Rinser, ensuring easy drainage into the sink.

7. טראָובלעשאָאָטינג

If you encounter any issues with your KRAUS CleanMate Glass Rinser, refer to the following common solutions:

• נידעריק וואַסער דרוק: Check the water supply line connections for any kinks or obstructions. Ensure the main water supply valve is fully open.
• לעכנדיקע פֿאַרבינדונגען: Tighten all water line connections, ensuring Teflon tape was applied correctly during installation. If the plastic tee fitting is leaking, consider replacing it with a metal or brass alternative for a more secure and durable connection.
• Rinser Not Activating: Ensure the drinkware is pressed down firmly and centered over the spray nozzle. The 1/8-turn safety lock requires adequate pressure to activate.
• Water Splashing: Ensure the drinkware fully covers the rinser opening during activation. The integrated safety lock helps prevent splashing, but proper placement is key.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי & שטיצן

The KRAUS CleanMate Glass Rinser comes with a לימיטעד וואָראַנטי. For detailed warranty information, product support, or to purchase replacement parts, please visit the official Kraus webזייטל אדער קאנטאקט זייער קאסטומער סערוויס. איר קענט אויך באזוכן די Kraus Store on Amazon פֿאַר מער אינפֿאָרמאַציע.