Formulamod Fm-48124P-S-450

FormulaMod 12VHPWR Extension Cable Instruction Manual

Model: Fm-48124P-S-450

1. הקדמה

This manual provides instructions for the proper installation, operation, and maintenance of the FormulaMod 12VHPWR Extension Cable. This cable is designed to connect a 16-pin (12+4) PCIe 5.0 GPU to a power supply unit (PSU) using four 8-pin PCIe connectors.

2. פּראָדוקט איבערview

2.1 פֿעיִקייטן

  • קאַנעקטער טיפּ: 16-pin (12+4) Male to 4x 8-pin Female.
  • קאַבלע מאָס: 16AWG for stable power delivery.
  • לענג: 30cm (12-inch).
  • פּלאַן: Sleeved power cord with pre-installed cable combs for neat cable management.
  • מאַטעריאַל: Ultra-soft, high-density nylon braid with tinned copper conductors.
  • קאַמפּאַטאַבילאַטי: Designed for PCIe 5.0 GPUs such as RTX 4090, RTX 4080, and RTX 3090 Ti.

2.2 ספּעסאַפאַקיישאַנז

סאָרטFormulamod
מאָדעל נומערFm-48124P-S-450
קאָלירשוואַרץ
קאַנעקטער דזשענדערזכר-צו-ווייַבלעך
Voltage220.0 V
אַרייַנשרייַב קראַנט2 Amps
UL ליסטעדניין

3. סעטאַפּ אינסטרוקציעס

Follow these steps to properly install your FormulaMod 12VHPWR Extension Cable:

  1. צוגרייטן אייער סיסטעם: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the graphics card and power supply unit.
  2. ידענטיפיצירן קאַנעקטערז: Locate the 16-pin (12+4) power input on your PCIe 5.0 graphics card. Identify four available 8-pin PCIe power output connectors on your power supply unit.
  3. Connect to GPU: Carefully insert the 16-pin male connector of the extension cable into the corresponding 16-pin port on your graphics card. Ensure it is fully seated and latched.
  4. פאַרבינדן צו PSU: Connect each of the four 8-pin female connectors from the extension cable to four אומאָפּהענגיק 8-pin PCIe power cables from your power supply. It is crucial to use separate cables from the PSU for each 8-pin connector on the extension cable to ensure stable power delivery and prevent overloading.
Diagram showing correct and incorrect connection methods for the 12VHPWR extension cable.
וויכטיק: Always use 4 independent 8-pin PCIe cables from your power supply. Do not connect more than one 8-pin connector to a single split cable from the PSU.
Image showing the FormulaMod 12VHPWR extension cable connected to a GPU, demonstrating a neat and tidy installation.
The flexible design and included cable combs facilitate a clean and organized installation within your PC case.

4. אַפּערייטינג ינסטרוקטיאָנס

Once the FormulaMod 12VHPWR Extension Cable is securely connected to both your graphics card and power supply, no further operational steps are required for the cable itself. The cable acts as a passive conduit for power. Ensure all connections are firm before powering on your system.

After installation, close your computer case, plug in the power cord, and power on your system. Verify that your graphics card receives power and functions correctly.

5. וישאַלט

The FormulaMod 12VHPWR Extension Cable requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:

  • רעגולער דורכקוק: Periodically check the cable and its connectors for any signs of wear, damage, or discoloration.
  • ריינקייַט: Keep the cable free from dust and debris. Use compressed air or a soft, dry cloth to gently clean the cable and connectors.
  • פֿאַרמייַדן דרוק: Do not bend the cable sharply or apply excessive force to the connectors. The cable features a pre-bent design for easier routing, but extreme angles can damage the internal wiring.
  • זיכער קאַנעקשאַנז: Ensure all connections remain firmly seated. Loose connections can lead to power instability or component damage.
Close-up image of the 16AWG tinned copper wires within the FormulaMod extension cable, highlighting its robust construction.
The 16AWG tinned copper construction ensures durability and stable power delivery.

6. טראָובלעשאָאָטינג

If you encounter issues after installing the FormulaMod 12VHPWR Extension Cable, consider the following troubleshooting steps:

  • No Power to GPU:
    • Ensure the 16-pin connector is fully seated into the graphics card. A click should be heard or felt.
    • Verify that all four 8-pin connectors are securely plugged into independent PCIe power cables from your PSU.
    • Check that your PSU is adequately powered and functioning correctly.
  • סיסטעם אינסטאביליטעט אדער קראַשיז:
    • Confirm that your power supply unit meets the minimum wattage requirements for your graphics card and entire system.
    • Re-check all cable connections to ensure they are firm and not loose.
    • Ensure you are using four separate 8-pin PCIe cables from the PSU, not split cables, as shown in the setup diagram.
  • גשמיות שעדיקן: If the cable appears damaged, bent, or discolored, discontinue use immediately and replace it.

7. וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the official Formulamod webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך. האלט אייער קויף קוויטל אלס באווייז פון קויפן פאר יעדע גאראנטיע טענות.

פאַבריקאַנט: Formulamod

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.