KAOLALI Car Parking Sensors Instruction Manual

הקדמה

Thank you for choosing the KAOLALI Car Parking Sensors. This manual provides comprehensive instructions for the installation, operation, and maintenance of your new acoustic car reverse backup system. Please read this manual thoroughly before installation and use to ensure proper function and safety.

פּראָדוקט איבערview

וואָס איז אין די קעסטל

• 4 x 2.5m Parking Sensors
• 1 רענטגענ בוזזער
• 1 x Hole Saw (for drilling sensor holes)
• 1 x Main Motor (Control Unit)
• 1 x 3M Sticker (for mounting)

Image: Four individual parking sensors, each with a red cap and an attached cable, ready for installation.

שליסל פֿעיִקייטן

• High-quality metal parking sensors for durability.
• Wide operating temperature range: -30°C to +70°C, suitable for all seasons.
• Accurate detection of obstacles.
• Audible alarm system for enhanced parking safety.
• Automatic system activation when the car is in reverse.
• Alarm volume increases as the vehicle approaches an obstacle.

בילד: אן איבערקאפ view of a car with four rear parking sensors, connected to a buzzer that emits sound alerts when obstacles are detected.

ינסטאַללאַטיאָן גייד

Proper installation is crucial for the optimal performance of your parking sensor system. Follow these steps carefully:

1. סענסאָר אָרט: Determine the optimal locations on your vehicle's rear bumper for the four parking sensors. Ensure they are evenly spaced and at a consistent height for accurate detection.


Image: A red car's rear bumper with two white circles marking suggested locations for parking sensor installation.

2. דרילינג האָלעס: Use the provided hole saw (16.5mm diameter) to drill precise holes at the marked locations on the bumper. Ensure the holes are clean and free of burrs.


בילד: א דעטאַלירטע view of a parking sensor, showing its dimensions (16.5mm diameter) and the metal hole saw used for installation.

3. סענסער ינסטאַלירונג: Insert the parking sensors into the drilled holes. Ensure they are securely fitted and facing outwards.
4. וויירינג קאַנעקשאַנז:
   • פאַרבינדן די red power cord from the main motor to the power cord of the vehicle's ריווערסינג לamp. This ensures the system activates when reverse gear is engaged.
   • פאַרבינדן די blue power cord from the main motor to the vehicle's ברעקל לamp.
   • פאַרבינדן די black power cord from the main motor to a suitable ערד פונט on the vehicle chassis.
5. Buzzer Placement: Mount the buzzer in a location inside the vehicle where the alarm can be clearly heard by the driver, using the provided 3M sticker.
6. Main Motor Placement: Secure the main motor (control unit) in a dry, protected area within the vehicle, away from excessive heat or moisture.
7. פּרובירן די סיסטעם: After installation, test the system by engaging reverse gear and slowly approaching an obstacle to verify the alarm functionality.

אַפּערייטינג ינסטראַקשאַנז

The KAOLALI Car Parking Sensor system is designed for simple and intuitive operation:

• אָטאַמאַטיק אַקטאַוויישאַן: The radar system automatically starts detection when the car is put into reverse gear.
• שטערונג דעטעקשאַן: The four rear sensors continuously monitor the area behind your vehicle.
• Audible Warning: When an obstacle is detected within the system's range (30cm-200cm), the buzzer will emit an audible warning.
• Proximity Indication: The closer your vehicle gets to an obstacle, the louder and more frequent the alarm sound will become, providing clear feedback on the remaining distance.

Image: This image illustrates the benefit of parking sensors in preventing collisions, showing a white car safely reversing while two individuals inspect a damaged bumper on another vehicle.

וישאַלט

To ensure the longevity and reliable performance of your KAOLALI Car Parking Sensors, follow these simple maintenance guidelines:

• סענסאָר רייניקונג: Regularly clean the surface of the parking sensors to remove dirt, mud, snow, or ice. Obstructions can interfere with detection accuracy. Use a soft cloth and mild cleaning solution.
• קאַבלע דורכקוק: Periodically check all wiring connections for any signs of wear, damage, or loose connections. Ensure cables are securely fastened and not exposed to excessive friction or heat.
• פֿאַרמײַדן הויך-דרוק וואַשינג: When washing your vehicle, avoid directing high-pressure water jets directly at the sensors, as this could potentially damage them.
• ענוויראָנמענטאַל שוץ: While the sensors are designed for various weather conditions, extreme environmental factors (e.g., prolonged exposure to corrosive chemicals) should be avoided.

טראָובלעשאָאָטינג

If you encounter issues with your parking sensor system, refer to the following common problems and solutions:

• No Alarm Sound:
  • Check if the system is properly powered when reverse gear is engaged.
  • Verify all wiring connections (red to reverse lamp, black to ground, blue to brake lamp) are secure.
  • Ensure the buzzer is correctly connected to the main motor and is not obstructed.
• Continuous Alarm or False Alarms:
  • Inspect sensors for dirt, mud, ice, or other obstructions on their surface. Clean them thoroughly.
  • Check if sensors are securely mounted and not loose or angled incorrectly.
  • Ensure no external objects (e.g., tow hitch, bicycle rack) are permanently within the sensor's detection range.
• Inconsistent Detection:
  • Verify that all sensors are clean and free from damage.
  • Check for any loose wiring connections to individual sensors or the main motor.
  • Ensure sensors are installed at a consistent height and angle.

אויב די טריט לייזן נישט דעם פראבלעם, ביטע קאנטאקטירט קאסטומער סופארט פאר ווייטערדיגע הילף.

טעכניש ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

KAOLALI products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official KAOLALI webזייטל. ביטע באַהאַלטן אייער קויפן באַווייַז פֿאַר קיין וואָראַנטי קליימז.