FIDECO Magnetic M.2 2230 NVMe SSD Enclosure User Manual

1. הקדמה

This manual provides detailed instructions for the FIDECO Magnetic M.2 2230 NVMe SSD Enclosure. This device allows you to expand storage and transfer data at high speeds between various compatible devices, including iPhone 15 series and above, MacBooks, iPad Pros, and Android devices. Its magnetic design ensures secure attachment to MagSafe-compatible phones.

The enclosure supports M.2 NVMe SSDs of size 2230 (M-Key or M+B Key) and utilizes USB 3.2 Gen 2 for data transfer speeds up to 10Gbps. It is designed for plug-and-play operation across Windows, Mac OS, and Linux operating systems.

Image 1.1: FIDECO Magnetic M.2 2230 NVMe SSD Enclosure.

2. פּעקל אינהאַלט

באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען אַרייַנגערעכנט אין אייער פּעקל:

• 1x FIDECO NVMe SSD Enclosure
• 1 קס וסב-C צו וסב-C קאַבלע
• 1x Silicone Thermal Pad
• 1x Screwdriver with Screws
• 1x באַניצער מאַנואַל

Image 2.1: Package contents including the enclosure, cable, thermal pad, screwdriver, and manual.

3. ספּעסאַפאַקיישאַנז

Image 3.1: The enclosure supports M.2 NVMe 2230 SSDs (M-Key or M+B Key) only.

4. סעטאַפּ

4.1. Installing the M.2 SSD

Follow these steps to install your M.2 2230 NVMe SSD into the enclosure:

1. Unscrew the back cover: Use the provided screwdriver to loosen the screws on the back cover and carefully remove the metal lid.
2. Insert the M.2 SSD: Gently insert your M.2 2230 NVMe SSD into the slot. Ensure it is fully seated. Secure the SSD with the small screw provided.
3. Apply the thermal pad: Peel off the protective film from both sides of the silicone thermal pad. Place the thermal pad directly onto the SSD chip. This helps with heat dissipation.
4. Close the enclosure: Place the back cover back onto the enclosure and tighten the screws securely.

Image 4.1: Visual guide for SSD installation.

4.2. Initial Setup and Formatting

After installing the SSD, it may need to be formatted before use, especially if it's new. The recommended file system for broad compatibility with iPhone, Mac, and PC is exFAT.

פֿאַר מעק:

1. Connect the SSD in its enclosure to your Mac.
2. עפענען דיסק Utility (found in Applications > Utilities).
3. Select the newly connected SSD from the sidebar.
4. דריקט מעקן in the top bar.
5. In the pop-up window, set the Format to exFAT and the Scheme to GUID Partition Map.
6. דריקט מעקן to confirm. This will format the SSD.

פֿאַר Windows פּיסי:

1. Connect the SSD in its enclosure to your PC.
2. עפענען File Explorer (Windows Key + E).
3. Locate the newly connected SSD (it might appear as an unformatted drive).
4. Right-click on the drive and select Format....
5. אונטער File system, select exFAT.
6. פאַרזיכערן שנעל פֿאָרמאַט איז אָפּגעשטעלט און גיט אָנהייב.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1. פֿאַרבינדן זיך צו דעוויסעס

The FIDECO SSD enclosure is plug-and-play. Simply connect it to your device using the provided USB-C to USB-C cable. No additional drivers or software are required.

• iPhone 15 Series and Above: Connect directly to the iPhone's USB-C port.
• MacBook/iPad Pro: Connect directly to the USB-C port.
• אַנדרויד דעוויסעס: Connect directly to the USB-C port.
• PCs/Laptops/Gaming Consoles: Connect to an available USB-C port.

Image 5.1: The enclosure offers versatile connectivity with multiple devices.

5.2. Magnetic Attachment (for MagSafe-compatible phones)

The enclosure features built-in magnets for secure attachment to iPhone 15 series and newer models with MagSafe functionality. This allows for convenient, hands-free use, reducing the risk of accidental drops or disconnections during use, such as when recording video.

באַמערקונג: This magnetic feature is only compatible with mobile phones that have magnetic suction functionality (MagSafe or equivalent).

Image 5.2: Magnetic attachment to an iPhone for simultaneous recording and storage.

5.3. דאַטאַ אַריבערפירן

The enclosure supports USB 3.2 Gen 2, providing data transfer speeds up to 10Gbps. This enables rapid transfer of large files, photos, and videos. It also supports UASP, TRIM, and S.M.A.R.T for optimized performance and drive health monitoring.

For optimal speeds, ensure your host device also supports USB 3.2 Gen 2. Older USB standards will result in lower transfer rates.

בילד 5.3: הויך-גיכקייט דאַטן אַריבערפירן מעגלעכקייטן.

6. וישאַלט

To ensure the longevity and optimal performance of your FIDECO SSD enclosure:

• רייניקונג: ניצט אַ ווייכע, טרוקענע שטאָף צו רייניקן די אויסערלעכע זייט פון דעם קעסטל. פֿאַרמייַדט ניצן פליסיקע רייניגער אָדער סאָלווענטן.
• היץ דיסיפּיישאַן: די אַלומינום סיasing and included thermal pad are designed for efficient heat dissipation. Ensure the enclosure is not covered or placed in an area with poor airflow during extended use to prevent overheating.
• סטאָרידזש: ווען נישט אין באַנוץ, האַלט די קעסטל אין אַ קיל, טרוקן אָרט אַוועק פון דירעקט זונשייַן און עקסטרעמע טעמפּעראַטורן.
• האַנדלינג: Handle the enclosure with care to avoid physical damage. While the magnetic attachment is secure, avoid unnecessary force or impacts.

7. טראָובלעשאָאָטינג

• SSD נישט דערקענט:
  • Ensure the SSD is correctly installed and secured within the enclosure.
  • Verify the SSD is an M.2 NVMe 2230 (M-Key or M+B Key). SATA SSDs are not compatible.
  • Check the cable connection to both the enclosure and your device. Try a different USB-C port or cable if available.
  • If it's a new SSD, ensure it has been formatted (refer to Section 4.2).
  • Test the enclosure with a different SSD or on another compatible device to isolate the issue.
• לאַנגזאַמע דאַטן טראַנספער גיכקייטן:
  • Ensure your device's USB-C port supports USB 3.2 Gen 2 (10Gbps). Older USB standards will limit speed.
  • Verify the cable used is rated for USB 3.2 Gen 2 speeds.
  • Close any unnecessary applications on your device that might be consuming system resources.
  • Ensure the SSD itself is performing optimally.
• Magnetic Attachment Not Strong Enough:
  • Confirm your phone has MagSafe or equivalent magnetic functionality.
  • If using a phone case, ensure it is MagSafe compatible or thin enough not to interfere with the magnetic connection.
  • Clean the magnetic surfaces on both the enclosure and your phone/case to ensure no debris is weakening the connection.

8. וואָראַנטי

The FIDECO Magnetic M.2 2230 NVMe SSD Enclosure comes with a one-year limited warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

ביטע האַלטן דיין דערווייַז פון קויפן פֿאַר וואָראַנטי קליימז.

9. שטיצן

For technical support, warranty claims, or further assistance, please contact FIDECO customer service through the retailer where you purchased the product or visit the official FIDECO webפּלאַץ פֿאַר קאָנטאַקט אינפֿאָרמאַציע.

When contacting support, please provide your product model number (API15) and a detailed description of the issue.