אלגעמיינע מאָנטירונג קלאַמער קלעמערל פֿאַר Govee PRO שטענדיקע דרויסנדיקע לייץ H706A H806A - באַניצער מאַנואַל

1. הקדמה

These mounting bracket clips are designed to provide a secure and reliable method for attaching Govee PRO Permanent Outdoor LED Lights (models H706A and H806A) to various surfaces. They offer an enhanced mounting solution, complementing or replacing the factory adhesive, and are engineered for durability in outdoor conditions.

Figure 1: Govee PRO light secured with a mounting bracket.

2. קאַמפּאַטאַבילאַטי

These mounting brackets are specifically designed for use with Govee PRO Permanent Outdoor Lights. Please verify your light model number to ensure proper fit and function.

• קאַמפּאַטאַבאַל מאָדעלס: Govee PRO Permanent Outdoor Lights H706A, H706B, H706C, H806A, H806B, H806C.
• נישט קאָמפּאַטיבל מיט: Govee RGBIC LED "non-pro/original" (H705 series), Govee Permanent Outdoor Lights Elite (H805 series), or any other brand/model of lights.

Figure 2: Compatibility Chart for Govee Permanent Outdoor Lights.

3. פּעקל אינהאַלט

Your package includes the specified quantity of mounting brackets. Please note that additional hardware is required for installation and is not included.

• Mounting Brackets (Quantity as purchased, e.g., 60 White)

Items Not Included (Required for Installation):

• Screws: #8 diameter or smaller, minimum 1/2 inch length recommended. Examples include "gutter screws," "zip screws," or "TEK screws."
• Driver Bit: Appropriate for your chosen screws.
• Govee PRO Permanent Outdoor Lights (H706A/H806A)

Figure 3: Components for installation, highlighting items not included.

4. אויפשטעלן און אינסטאַלירן

Follow these steps to securely install your Govee PRO Permanent Outdoor Lights using the mounting brackets.

4.1 איידער איר אָנהייבן

• Ensure you have the correct Govee PRO light models (H706A/H806A series).
• Gather necessary tools: drill, appropriate driver bit, and #8 diameter (or smaller) screws, at least 1/2 inch long.
• Plan the layout of your lights and mark installation points.
• Ensure the mounting surface (wood, aluminum/vinyl soffit, steel siding, etc.) is clean and suitable for screw installation.

4.2 ינסטאַללאַטיאָן סטעפּס

1. שטעלן די בראַקאַץ: Place the mounting bracket over the Govee light module. The bracket is designed to clip onto the light, wrapping around the entire module for a secure fit. This can be done even if the lights are already taped to the surface.


Figure 4: Bracket clipped onto a Govee light module.

2. אויסגלייַכן און זיכערן: Once the bracket is clipped onto the light, align the bracket's screw holes with your desired mounting location on the surface. The bracket's design ensures the light module is clamped securely to the surface when fastened.
3. אַרייַנלייגן סקרוז: Using your drill and appropriate driver bit, insert screws through the pre-drilled holes in the mounting bracket. Drive the screws firmly but avoid over-tightening, which can damage the bracket or the mounting surface. The mounting tabs are 1/8 inch thick, so a screw length of 1/2 inch minimum is suggested for adequate grip.
4. איבערחזרן: Continue this process for each Govee light module you wish to secure.

These brackets provide a robust attachment, preventing lights from detaching due to adhesive failure or environmental factors. They are designed to hold the light module itself, not just the wire, for maximum security.

5. אָפּעראַציע

Once installed, the mounting brackets operate passively by securely holding your Govee PRO Permanent Outdoor Lights in place. No active operation is required from the brackets themselves.

• Ensure all brackets are firmly attached and screws are tightened appropriately.
• Periodically inspect the brackets and lights to confirm they remain secure, especially after severe weather conditions.

6. וישאַלט

Minimal maintenance is required for the mounting brackets. Regular inspection and cleaning will help ensure their longevity and continued performance.

• רייניקונג: If dirt or debris accumulates on the brackets, gently wipe them clean with a damp שטאָף. פֿאַרמײַדט שאַרפֿע כעמיקאַלן אָדער אַברייסיוו רייניגער.
• דורכקוק: Annually, or after significant weather events, inspect all installed brackets for any signs of damage, cracking, or loosening. Check that screws remain tight.
• מאַטעריאַל: The brackets are 3D-printed from durable and weather-resistant PETG plastic, designed to withstand outdoor elements.

7. טראָובלעשאָאָטינג

די סעקציע באהאנדלט אלגעמיינע פראבלעמען וואס קענען אויפשטיין בעת ​​אדער נאך דער אינסטאלאציע.

Issue: Bracket cracks during screw installation.

לייזונג: This can occur if screws are over-tightened or not driven straight. Ensure screws are #8 diameter or smaller and drive them straight. Tighten until snug, but avoid excessive force. If a bracket cracks, replace it with a new one.

Issue: Light module feels loose after installation.

לייזונג: Verify that the bracket is correctly clipped around the light module and that the screws are adequately tightened. The bracket should clamp the light firmly against the mounting surface. Ensure the light model is compatible (H706A/H806A series).

Issue: Brackets do not fit the lights.

לייזונג: Confirm that your Govee lights are the compatible PRO models (H706A/H806A series). These brackets are not compatible with H705 (original), H805 Elite, or other brands. Refer to the Compatibility section.

8. ספּעסאַפאַקיישאַנז

Figure 5: Mounting Bracket Dimensions.

9. וואָראַנטי & שטיצן

Information regarding specific warranty terms for this product is not provided in the available documentation. For any product-related inquiries, technical assistance, or support, please contact the manufacturer directly.

• פאַבריקאַנט: Ansgar Labs
• Please refer to the retailer's return policy for details on returns or exchanges.