Luqeeg Digital Door Viewער באַניצער מאַנואַל

1. הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your Luqeeg Digital Door Viewer. Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.

2. פּראָדוקט פֿעיִקייטן

• 2.4-אינטש לקד ווייַז: Provides a clear and vivid view of visitors at your door.
• 0.3MP Professional Camera: Captures crisp images for easy identification, even in low light conditions.
• 120° ברייט ווינקל אָביעקטיוו: אָפפערט אַ ברייטע view of your doorstep, minimizing blind spots and enhancing security.
• דוראַבאַל צינק צומיש קאַנסטראַקשאַן: Engineered for superior wear resistance and impact strength, preventing prying and smashing.
• צווייענדיק מאַכט צושטעלן: Operates using either 3 x 1.5V AAA batteries (not included) or a 5V 1A USB power source for continuous operation.
• אָטאַמאַטיק ווייַז אַקטאַוויישאַן: The screen automatically displays the outside view when the doorbell is pressed, providing convenience for all users.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:

• 1 x Digital Door Viewer Camera Unit
• 1 x Digital Door Viewer Monitor Unit
• 1 x Accessory Kit (includes 2 x Washers, 8 x Screws)
• 1 x באַניצער מאַנואַל

Note: AAA batteries and a small memory card are not included and must be purchased separately.

4. פּראָדוקט איבערview

Familiarize yourself with the components of your Luqeeg Digital Door Viewער.

Figure 4.1: Monitor Unit Components

• LCD פאַרשטעלן: דיספּלייז די לעבן view פון דער אַפּאַראַט.
• Monitoring/Power On/Off Button: Press to activate the screen or power the device on/off.
• USB צובינד: For connecting a 5V 1A USB power source.
• Small Memory Card Slot: Insert a memory card (not included) for potential recording features (if supported by firmware).

Figure 4.2: Monitor Unit Rear View (Battery Compartment)

• באַטערי אָפּטייל: Houses 3 x AAA batteries (not included).

5. ינסטאַללאַטיאָן גייד

The Luqeeg Digital Door Viewer is designed for simple installation, fitting standard door peephole holes without requiring special tools.

5.1 צוגרייטונג

• Ensure your door has an existing peephole or a suitable hole for installation.
• Gather necessary components: Camera unit, Monitor unit, washers, and screws.
• Prepare 3 x AAA batteries (not included) or a 5V 1A USB power source.

5.2 ינסטאַללאַטיאָן סטעפּס

פיגור 5.1: אינסטאַלאַציע איבערview

1. Step 1: Remove Existing Peephole (if applicable)
   Carefully unscrew and remove any existing traditional peephole from your door.
2. Step 2: Insert Camera Unit
   From the outside of the door, insert the camera unit through the peephole hole. Ensure the camera is facing outwards and is flush with the door surface.
3. Step 3: Secure Monitor Unit
   From the inside of the door, connect the cable from the camera unit to the monitor unit. Align the monitor unit with the camera unit and secure it to the door using the provided screws and washers. Ensure the monitor is firmly attached and stable.

5.3 מאַכט די מיטל

• באַטאַרייע מאַכט: Open the battery compartment on the back of the monitor unit and insert 3 x AAA batteries, observing correct polarity.
• USB Power: Connect a 5V 1A USB power adapter (not included) to the USB interface on the side of the monitor unit. This can serve as a backup or primary power source.

6. אַפּערייטינג ינסטרוקטיאָנס

6.1 פּאַוערינג אויף / אַוועק

• צו מאַכט אויף: Press and hold the Monitoring/Power On/Off button located below the LCD screen until the screen illuminates.
• צו מאַכט אַוועק: Press and hold the Monitoring/Power On/Off button until the screen turns off.

6.2 Viewing Visitors

• מאַנואַל View: Press the Monitoring/Power On/Off button once to activate the screen and view the outside area. The screen will automatically turn off after a short period of inactivity to conserve power.
• אָטאַמאַטיק View: When someone presses your doorbell (if connected and compatible, or if the device detects motion/sound, depending on model features), the screen will automatically activate and display the outside view.

פיגורע 6.1: Viewing a Visitor

6.3 Memory Card Usage (Optional)

If your model supports recording and you have inserted a small memory card into the slot:

• Refer to the on-screen menu or additional documentation for specific instructions on how to initiate recording, view playback, or manage stored footage.

7. וישאַלט

• רייניקונג: Use a soft, dry cloth to clean the screen and camera lens. Avoid abrasive cleaners or solvents.
• באַטערי פאַרבייַט: When the battery indicator shows low power, replace all 3 AAA batteries simultaneously. Do not mix old and new batteries.
• ינווייראַנמענאַל טנאָים: Ensure the device is not exposed to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

8. טראָובלעשאָאָטינג

9. ספּעסאַפאַקיישאַנז

10. שטיצן

For any questions, technical assistance, or support regarding your Luqeeg Digital Door Viewer, please refer to the contact information provided with your purchase or visit the official Luqeeg website. Our customer support team is available to assist you.