הקדמה
The RunCam Spotter V2 Micro FPV AIO Camera is a compact, all-in-one camera and video transmitter designed for various RC applications, including RC cars, boats, drones, and planes. It features a 700TVL camera with a 170-degree field of view, an integrated microphone, and an On-Screen Display (OSD) for real-time data. The 5.8G video transmitter offers adjustable power output from 20mW to 200mW across 40 channels, ensuring compatibility with standard FPV goggles and monitors.
פּעקל אינהאַלט
- 1x Spotter V2 Micro FPV AIO Camera (with Cloverleaf antenna)
- 1x XT-60 Power Cable
- 1x Double Sided Tape (one side Velcro)
- 1x Spare Whip Antenna
- 1x באַניצער מאַנואַל (דאָס דאָקומענט)
פּראָדוקט איבערview
The Spotter V2 is designed for minimal impact on device performance due to its lightweight and compact form factor. It provides an expansive field of view for an immersive FPV experience.
Image: The RunCam Spotter V2 FPV Camera, demonstrating its compact size and lightweight design, weighing only 9g.
Image: Illustration of the 170-degree wide-angle lens, providing an expansive field of view for enhanced detail in FPV applications.
Image: Detailed dimensions of the Spotter V2 camera, measuring 35x20.5x17.8mm (excluding antenna).
סעטאַפּ
- מאַכט קשר: Connect the provided XT-60 power cable to the camera and your power source (2S-4S LiPo battery, 7.4V-14.8V). Ensure correct polarity.
- אַנטענע ינסטאַלירונג: The camera comes with a pre-installed Cloverleaf antenna. A spare Whip Antenna is included for replacement if needed. Ensure the antenna is securely attached.
- מאָונטינג: Use the double-sided tape (one side Velcro) to securely mount the camera on your RC vehicle. Position the camera to achieve the desired field of view.
- קאָאָלינג: Due to potential heat generation, especially in enclosed spaces, ensure adequate airflow around the camera's heatsink. Consider adding a small cooling fan if mounting inside an RC vehicle without natural ventilation.
- FPV Receiver Connection: The Spotter V2 is compatible with all analog 5.8G FPV goggles and monitors. Refer to your FPV receiver's manual for pairing instructions.
Image: The Spotter V2 camera is broadly compatible with analog FPV goggles and monitors.
אַפּערייטינג ינסטראַקשאַנז
- מאַכט אויף: Connect the camera to a compatible power source. The camera will power on automatically.
- Channel and Band Selection: The camera features 5 bands and 40 channels. Use the button on the camera to cycle through channels and bands. Refer to the detailed frequency table (usually provided in a separate quick start guide or on the product page) to match your FPV receiver.
- On-Screen Display (OSD): The integrated OSD provides real-time flight data, such as battery voltage and channel information. This data is overlaid on the video feed.
- ינטעגראַטעד מיקראָפאָן: The built-in microphone captures audio, enhancing the immersive FPV experience.
- ווידעא טראַנסמיסיע: Once powered on and a channel is selected, the camera will transmit video. Ensure your FPV goggles or monitor are tuned to the same frequency.
Image: The camera's button for frequency adjustment and its heatsink for thermal management.
וישאַלט
- רייניקונג: Keep the camera lens clean using a soft, dry cloth. Avoid abrasive materials or harsh chemicals.
- טערמאַל פאַרוואַלטונג: Regularly inspect the heatsink for dust or debris. Ensure consistent airflow to prevent overheating, which can degrade video quality and shorten component lifespan.
- אַנטענע זאָרגן: Handle the antenna carefully. If the Cloverleaf antenna is damaged, it can be replaced with the spare Whip Antenna by soldering.
- סטאָרידזש: Store the camera in a dry, cool environment away from direct sunlight and extreme temperatures.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Distorted or No Video Signal |
|
|
| Camera Gets Excessively Hot |
|
|
| קיין אַודיאָ |
|
|
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| אַפּאַראַט | 700 TVL, 170-degree wide-angle lens |
| האַכלאָטע | 1280*960 |
| ווידעא אָוטפּוט רעסאָלוטיאָן | 720 בילדצעלן |
| Default Video Input | PAL |
| ווידעא טראַנסמיסיע | 5.8G, 40CH, 20mW~200mW adjustable |
| מאַקסימום טראַנסמיסיע דיסטאַנסע | 500 meters / 547 yards |
| אַרייַנשרייַב מאַכט | 2S-4S (7.4V~14.8V) |
| אַנטענע | Cloverleaf and Whip antenna (interchangeable) |
| אָפטקייַט אַדזשאַסטמאַנט | דרוק קנעפּל |
| פֿעיִקייטן | Built-in OSD, Integrated Microphone |
| מינימום יללומינאַטיאָן | 0.5 לוקס |
| אַפּערייטינג קראַנט | 80מאַ |
| דימענסיעס (ל*ב*ה) | 35*20.5*17.8mm (Antenna not included) |
| גאַנץ וואָג | 9g |
| מאַטעריאַל | פּלאַסטיק |
| בקיעס מדרגה | אָנהייבער |
וואָראַנטי
The RunCam Spotter V2 FPV Camera and Transmitter Kit typically comes with a 1-year limited warranty. For specific warranty terms, conditions, and claim procedures, please refer to the official RunCam webזייטל אדער קאנטאקט זייער קאסטומער סופארט גלייך. האלט אייער באווייז פון קויפן פאר גאראנטיע וואלידאציע.
שטיצן
For further assistance, technical support, or inquiries regarding the RunCam Spotter V2, please visit the official RunCam website or contact their customer service department. Online resources, FAQs, and firmware updates may also be available on their webפּלאַץ.
Official RunCam Store: Visit the RunCam Store on Amazon
