Anderic DC8-96SG8

Anderic DC8-96SG8 Ceiling Fan Receiver Replacement Instruction Manual

Model: DC8-96SG8

1. הקדמה

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Anderic DC8-96SG8 Ceiling Fan Receiver. This receiver is designed as a direct replacement for specific 6-speed DC motor ceiling fans that originally utilized a DC8 series receiver. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. פּראָדוקט איבערview

The Anderic DC8-96SG8 is a high-quality replacement receiver for 6-speed DC motor ceiling fans. It restores all original fan functions, including:

  • 6-גיכקייַט פאָכער קאָנטראָל.
  • Reverse airflow for seasonal comfort.
  • LED light dimming support up to 60W.

The motor output is rated up to 40W, ensuring efficient and consistent performance.

Anderic DC8-96SG8 Ceiling Fan Receiver front view with wires

פיגורע 1: פראָנט view of the Anderic DC8-96SG8 Ceiling Fan Receiver, showing the compact black unit with various colored wires extending from both ends for connection to the fan and power supply.

3. קאַמפּאַטאַבילאַטי

This receiver is designed for specific ceiling fan models. It is compatible with select models from the following brands that originally used a DC8 series receiver:

  • מאַנטי קאַרלאָ
  • Casa Vieja
  • Hampטאָן בייַ

וויכטיק: This product is not universal. It is not compatible with Minka Aire, Hunter, or other proprietary systems. Always confirm your existing receiver is labeled "DC8" פארן קויפןasing to ensure a proper match. This receiver will not function in fans that were not originally equipped with a DC8 receiver.

4. פּעקל אינהאַלט

דער פּעקל כולל:

  • 1x Anderic DC8-96SG8 Ceiling Fan Receiver

באַמערקונג: The Anderic DC1 remote control, which is required for operation, is sold separately. If both a transmitter and receiver are needed, consider the Anderic DC1/DC8 Kit for a complete solution.

5. זיכערקייַט אינפֿאָרמאַציע

ביטע אָבסערווירן די פאלגענדע זיכערקייַט פּריקאָשאַנז:

  • דיסקאַנעקט מאַכט: Always turn off power to the ceiling fan at the main circuit breaker before attempting any installation, wiring, or maintenance.
  • קוואַלאַפייד עלעקטריקאַל: For best results and safety, professional installation by a qualified electrician is recommended.
  • ריכטיק וויירינג: זיכער מאַכן אַז אַלע וויירינג קאַנעקשאַנז זענען זיכער און אין לויט מיט די לאָקאַלע עלעקטרישע קאָודז.
  • Voltage: באַשטעטיקן אַז די מאַכט צושטעלן וואָלtage matches the receiver's requirements (AC 120V/60Hz).
  • וואָג שטיצן: Ensure the ceiling fan mounting structure can support the weight of the fan and receiver.

6. סעטאַפּ און ייַנמאָנטירונג

6.1. וויירינג דיאַגראַמע

Anderic DC8-96SG8 Ceiling Fan Receiver back view with wiring diagram

פיגורע 2: צוריק view of the Anderic DC8-96SG8 Ceiling Fan Receiver, displaying the wiring diagram and product specifications. The diagram illustrates connections for AC power, fan motor (Moteur 1, 2, 3), and light (For Light).

Refer to the wiring diagram printed on the back of the receiver (Figure 2) and the existing wiring of your ceiling fan for correct connections. The diagram typically shows connections for:

  • AC IN: Live (L) and Neutral (N) power supply.
  • FOR LIGHT: Light fixture connection.
  • מאָטאָר: Fan motor connections (often labeled Moteur 1, Moteur 2, Moteur 3 for multi-speed DC motors).
  • ANTENNA: For remote signal reception.

6.2. אינסטאַלאַציע טריט (אַלגעמיין)

  1. מאַכט דיסקאַנעקשאַן: Turn off power to the ceiling fan at the main circuit breaker.
  2. Access Receiver: Carefully lower the fan canopy to access the existing receiver and wiring.
  3. Remove Old Receiver: Disconnect the old receiver, noting all wire connections. It is advisable to take photos for reference.
  4. Install New Receiver: Connect the Anderic DC8-96SG8 receiver according to the wiring diagram (Figure 2) and your fan's specific wiring. Ensure all connections are secure using wire nuts.
  5. פאזיציע אויפנעמער: Carefully place the new receiver within the fan canopy, ensuring no wires are pinched.
  6. ומקערן מאַכט: ומקערן מאַכט אין די קרייַז צוימען.

6.3. Pairing with DC1 Remote Control

After installation, the receiver must be paired with an Anderic DC1 remote control (sold separately) to function. The pairing procedure typically involves:

  1. זיכער מאַכן אַז דער ווענטילאַטאָר האָט שטראָם.
  2. Within a short timeframe (usually 30-60 seconds) of restoring power, press and hold the "LEARN" or "PAIR" button on your Anderic DC1 remote control. Refer to your DC1 remote's manual for the exact button and procedure.
  3. דער ווענטילאַטאָר ליכט קען בלינקען אָדער דער ווענטילאַטאָר קען זיך קורץ אָנצינדן צו ווײַזן אַ געראָטענע פּאָרינג.

If pairing fails, repeat the steps. Ensure the remote has fresh batteries and is within range.

Anderic DC8-96SG8 Ceiling Fan Receiver side view with model number label

פיגורע 3: זייַט view of the Anderic DC8-96SG8 Ceiling Fan Receiver, showing the model number label "DC8-96SG8-L-D" and the antenna wire.

7. אַפּערייטינג ינסטרוקטיאָנס

Once the Anderic DC8-96SG8 receiver is successfully installed and paired with the DC1 remote control, you can operate your ceiling fan using the remote. Functions typically include:

  • פאָכער ספּיד קאָנטראָל: Adjust between 6 fan speeds.
  • פאָכער אויף/אַוועק: קער די פאָכער אויף אָדער אַוועק.
  • פאַרקערט לופט לויפן: Change the direction of fan rotation for summer (downward airflow) or winter (upward airflow) operation.
  • ליכט אויף/אַוועק: Turn the fan light on or off.
  • ליכט דימינג: Adjust the brightness of compatible LED lights (up to 60W).

Refer to your Anderic DC1 remote control manual for specific button functions and detailed operating instructions.

8. וישאַלט

The Anderic DC8-96SG8 receiver is designed for long-lasting reliability and requires minimal maintenance.

  • רייניקונג: Ensure the area around the receiver within the fan canopy remains free of dust and debris. Do not use liquid cleaners directly on the receiver.
  • קיין באַניצער-סערוויסאַבלע פּאַרץ: The receiver contains no user-serviceable parts. Do not attempt to open or repair the unit.
  • רעגולער טשעקס: Periodically check the fan's operation to ensure all functions are working correctly.

9. טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
דער פען אדער ליכט רעאגירט נישט אויף דער ווײַטקאָנטראָל.
  • קיין מאַכט צום ווענטילאַטאָר.
  • Receiver not paired with remote.
  • ווייַט באַטעריז זענען טויט.
  • Incorrect receiver installed.
  • קאָנטראָלירט דעם קרייז ברעיקער און וואַנט סוויטש.
  • דורכפירן די פּאָרינג פּראָצעדור (סעקציע 6.3).
  • פאַרבייַטן ווייַט באַטעריז.
  • Verify existing receiver was labeled "DC8".
דער ווענטילאַטאָר אַרבעט, אָבער דער ליכט נישט.
  • Light bulb faulty or loose.
  • Light wiring issue.
  • קאָנטראָליר/פאַרבייט די גלאָביר.
  • Verify light wiring connection to receiver.
Fan operates at incorrect speeds or inconsistently.
  • וויירינג אַרויסגעבן.
  • פונקציאָנער דורכפאַל.
  • Recheck all motor wiring connections.
  • Contact customer support if issues persist after verifying wiring and pairing.

If troubleshooting steps do not resolve the issue, contact Anderic customer support for further assistance.

10. ספּעסאַפאַקיישאַנז

שטריךדעטאַל
מאָדעל נומערDC8-96SG8
אַרייַנשרייַב וואָלtageאַק 120 וו / 60 הז
מאָטאָר רעזולטאַטמאַקסימום 40 וו
ליכט רעזולטאַטMax 60W (LED dimming supported)
פאָכער ספּידז6-speed DC motor control
דימענשאַנז4 X 4 X 3 אינטשעס
פּונקט וואָג4.2 אונסעס
קאָמפּאַטיבלע רימאָוטAnderic DC1 (sold separately)

11. וואָראַנטי און שטיצן

For warranty information or technical support, please contact Anderic customer service. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official webפּלאַץ.

Manufacturer: Dan's Electronics Etc., Inc.

© 2023 Anderic. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.