FALCAM F38 Backpack Camera Clip V2 with Plate Instruction Manual

הקדמה

The FALCAM F38 Backpack Camera Clip V2 with Plate provides a secure and quick-release solution for carrying your camera on backpack straps, belts, or sling straps. Designed for durability and ease of use, it features an Arca-Swiss compatible quick-release system, a robust 30kg (66lb) load capacity, and a dual-lock safety mechanism. This manual provides detailed instructions for proper setup, operation, and maintenance of your camera clip.

זיכערקייַט אינפֿאָרמאַציע

• Always ensure the camera plate is securely attached to your camera and the clip is firmly mounted to your strap before use.
• Verify the quick-release mechanism is fully engaged and the safety lock is activated to prevent accidental release.
• Do not exceed the maximum load capacity of 30kg (66lb).
• Regularly inspect the clip and plate for any signs of wear or damage. Discontinue use if damage is observed.
• האַלטן אויס פון דערגרייכן פון קינדער.

סעטאַפּ

1. Attaching the Quick Release Plate to Your Camera

The F38 Quick Release Plate attaches to your camera's 1/4"-20 tripod socket. Ensure the stainless steel and graphite nylon gaskets are properly installed on the plate's screw to prevent loosening and provide a stable connection.

1. Locate the 1/4"-20 screw on the F38 Quick Release Plate.
2. Align the plate with your camera's tripod socket.
3. Tighten the screw firmly using a coin or appropriate tool until the plate is secure and does not rotate.

Image: The F38 Quick Release Plate, highlighting the stainless steel and graphite nylon gaskets for secure camera attachment.

Image: The F38 Quick Release Plate can be mounted in any of the four directions on your camera.

2. Attaching the Camera Clip to Your Backpack Strap

The F38 Camera Clip features a T-shaped buckle with 3 clamping gears to accommodate various strap thicknesses (2mm to 20mm) and widths (up to 80mm). The flexible lanyard buckle and thermoplastic backplane ensure a snug fit.

1. Identify the desired location on your backpack strap, waist belt, or sling strap.
2. Open the T-shaped buckle on the back of the clip.
3. Position the clip on the strap. Adjust the clamping gears to match your strap's thickness for a secure fit.
4. Close the buckle firmly. Ensure the clip is stable and does not shift or bounce.

Image: The FALCAM F38 Backpack Camera Clip V2 securely attached to a backpack strap.

Image: Detail of the 3-gear adjustment system for varying strap thicknesses (2mm-20mm).

Image: The flexible structure and anti-slip rubber pads ensure a stable, no-bounce carry.

אַפּערייטינג ינסטראַקשאַנז

1. Attaching Your Camera to the Clip

The F38 clip features a quick slide-in auto-locking mechanism for instant camera access.

1. Ensure the safety lock is in the unlocked position (up).
2. Slide the camera (with the attached F38 plate) into the clip from the top.
3. The plate will auto-lock with a click. Gently pull on the camera to confirm it is securely fastened.

Image: The F38 plate slides into the clip and auto-locks for quick attachment.

2. רעלעasing Your Camera from the Clip

To quickly detach your camera, use the quick-release button.

1. Ensure the safety lock is in the unlocked position (up).
2. Press the quick-release button located on the side of the clip.
3. While holding the button, draw your camera upwards in one fluid motion to release it.

3. Using the Dual-Lock Safety System

The F38 clip includes a safety lock switch to prevent accidental unlocking.

• צו שלאָס the camera in place: After attaching your camera, push the quick-release button down to engage the lock. This prevents the button from being pressed accidentally.
• צו ופשליסן for release: Push the quick-release button upwards to disengage the lock. You can then press the button to release the camera.

Image: The safety lock switch on the quick-release button provides accidental touch protection.

וישאַלט

• רייניקונג: Wipe the clip and plate with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• דורכקוק: Periodically check all moving parts and connections for wear, damage, or debris. Ensure the quick-release mechanism operates smoothly.
• סטאָרידזש: Store the clip in a clean, dry environment when not in use.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

The FALCAM F38 Backpack Camera Clip V2 with Plate comes with a 1 יאָר מאַנופאַקטורער וואָראַנטי.

For technical support, warranty claims, or further inquiries, please contact FALCAM directly or refer to their official website. If purchased through Amazon, you may also contact the seller, FALCAM, for assistance.

• פאַבריקאַנט: פאַלקאַם
• פארקויפער (אויף עמעזאן): פאַלקאַם
• אָנליין שטיצן: Please visit the official FALCAM webזייטל פֿאַר די מערסט אַרויף-צו-דאַטע שטיצע אינפֿאָרמאַציע און קאָנטאַקט דעטאַלן.