ינסטראַקשאַנז מאַנואַל

פּראָדוקט איבערview

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the RSAG7.820.10462/ROH Power Supply and Main Board, compatible with HISENSE 58R6E3 (S/N: 58G21) televisions. This part has been tested to ensure functionality.

בילד: The RSAG7.820.10462/ROH Power Supply and Main Board. This image displays the full circuit board, highlighting various components such as USB ports, HDMI ports, audio/video input jacks, power supply capacitors, heat sinks, and the main processor area covered by a black heat spreader. The board is green with various electronic components soldered onto it, including resistors, capacitors, and integrated circuits. Markings like "COLD" and "HOT" indicate different sections of the power supply. A barcode and serial number are visible on the right side of the board.

זיכערקייַט אינפֿאָרמאַציע

Always disconnect the television from the power source before attempting any installation or maintenance. Static electricity can damage electronic components; use anti-static precautions (e.g., anti-static wrist strap) when handling the board. If you are unsure about any step, consult a qualified technician.

סעטאַפּ און ינסטאַלירונג

This section outlines the steps for replacing or installing the main board.

1. צוגרייטונג:
   • Ensure the television is unplugged from the wall outlet.
   • Place the television face down on a soft, clean surface to prevent screen damage.
   • זאַמלען די נויטיקע מכשירים: פיליפּס קאָפּ שרויפנציער, אַנטי-סטאַטיש האַנטגעלענק רימען.
2. Accessing the Main Board:
   • Remove the back cover of the television by unscrewing all retaining screws.
   • Carefully lift and set aside the back cover.
3. Disconnecting the Old Board (if applicable):
   • Identify all cables connected to the existing main board (e.g., power cables, ribbon cables, speaker cables, input/output cables).
   • Gently disconnect each cable. Note their positions for reassembly.
   • Unscrew the main board from the television chassis.
   • Carefully remove the old board.
4. Installing the New Board:
   • Align the new RSAG7.820.10462/ROH board with the mounting holes in the television chassis.
   • באַזײַטיקט דאָס ברעט מיט די פּאַסיקע שרויפֿן.
   • Reconnect all cables, ensuring they are firmly seated in their respective ports. Pay close attention to the orientation of ribbon cables.
5. לעצטע סטעפּס:
   • Replace the television back cover and secure it with all screws.
   • Carefully return the television to its upright position.
   • Plug the television into a power outlet.

אַפּערייטינג ינסטראַקשאַנז

Once the main board is correctly installed, the television should power on normally. The main board manages all core functions of the television, including video processing, audio output, and input management.

• מאַכט אויף: Press the power button on the television or remote control.
• אַרייַנשרייַב סעלעקציע: Use the remote control to select the desired input source (HDMI, AV, USB, etc.).
• פאַנגקשאַנאַליטי טשעק: Verify that all ports (HDMI, USB, AV) and functions (picture, sound) are working as expected.

וישאַלט

The RSAG7.820.10462/ROH main board is designed for long-term reliability. Minimal maintenance is required.

• רייניקונג: Keep the television's ventilation openings clear of dust and debris to ensure proper airflow and prevent overheating. Do not use liquid cleaners directly on the board.
• סוויווע: Operate the television in a well-ventilated area, away from excessive heat, humidity, and direct sunlight.
• מאַכט סערדזשז: Consider using a surge protector to safeguard the television and its internal components from electrical fluctuations.

טראָובלעשאָאָטינג

If you encounter issues after installing the main board, refer to the following common problems and solutions:

אויב די טריט לייזן נישט דעם פראבלעם, קען מען דארפן פראפעסיאנעלע הילף.

ספּעסאַפאַקיישאַנז

Key specifications for the RSAG7.820.10462/ROH Power Supply and Main Board:

• מאָדעל נאָמען: RSAG7.820.10462
• קאַמפּאַטאַבאַל דעוויסעס: Television (specifically HISENSE 58R6E3)
• הויפּט מאַכט קאַנעקטער טיפּ: 24-פּין
• graphics קאָרט צובינד: PCI Express (Note: This refers to internal board architecture, not an external slot)
• זיקאָרן סלאָץ בנימצא: 2 (Internal to the board, not user-accessible)
• נומער פון פּאָרץ: 3 (referring to specific types of ports)
• גאַנץ עטהערנעט פּאָרץ: 1
• גאַנץ HDMI פּאָרץ: 1
• Total PCI E- Ports: 1 (Internal to the board)
• פאַבריקאַנט: ddc
• ASIN: B0CPJSVMMQ

וואָראַנטי און שטיצן

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the documentation provided with your purchase or contact the seller directly.

For technical support or assistance with installation and troubleshooting, please contact the seller or manufacturer through the platform where the product was purchased. Provide your product model number (RSAG7.820.10462) and purchase details for faster service.