Electro-Harmonix Pico Triboro Bridge Overdrive, Distortion & Fuzz Pedal User Manual

1. פּראָדוקט איבערview

The Electro-Harmonix Pico Triboro Bridge is a versatile multi-mode drive pedal designed to provide a wide range of tonal possibilities. It features three distinct modes: Overdrive, Distortion, and Fuzz, allowing musicians to bridge any gap in their gain requirements. With its powerful EQ capabilities, input contouring, and compact pico-sized footprint, the Triboro Bridge can serve as a foundational element for your tone or offer a fresh alternative to your existing drive pedals.

שליסל פֿעיִקייטן:

• Wide range of saturation with Overdrive, Distortion, and Fuzz modes.
• Treble control boosts or cuts high end in Overdrive and Distortion modes.
• Bass control boosts or cuts low end in Overdrive and Distortion modes.
• Fuzz mode features a dedicated Gate control and a Low Pass Filter.
• Includes a power adapter for immediate use.

בילד: ווינקלדיק view of the Electro-Harmonix Pico Triboro Bridge pedal, highlighting its compact size and control knobs.

2. סעטאַפּ און קאַנעקשאַנז

Follow these steps to connect your Pico Triboro Bridge pedal to your audio setup:

1. מאַכט קשר: Connect the included 9V DC power adapter to the power jack on the top of the pedal. Ensure the power supply meets the pedal's specifications (9V DC, center-negative).
2. אַרייַנשרייַב קשר: פֿאַרבינדט אייער אינסטרומענט (גיטאַר, באַס, אאַז"וו) צום INPUT דזשעק אויף דער רעכטער זייט פֿונעם פּעדאַל ניצנדיק אַ סטאַנדאַרט 1/4-אינטש אינסטרומענט קאַבל.
3. רעזולטאַט קשר: פאַרבינדן די OUTPUT דזשאַק אויף די לינקס זייַט פון די טרעטלען צו דיין ampליפיער אדער דעם נעקסטן פּעדאַל אין אייער סיגנאַל קייט ניצנדיק אַ סטאַנדאַרט 1/4-אינטש אינסטרומענט קאַבל.
4. מאַכט אויף: Once all connections are secure, plug the power adapter into a wall outlet. The pedal's LED will illuminate when active.

בילד: הינטערשטע view of the Pico Triboro Bridge pedal, showing the power input jack for connecting the power adapter.

3. קאָנטראָלס און אָפּעראַציע

The Pico Triboro Bridge features intuitive controls for shaping your desired drive tone. Understanding each knob and button is key to unlocking its full potential.

קאָנטראָל קנעפּלעך:

• VOL (באנד): Controls the overall output level of the pedal. Adjust this to balance the effect's volume with your bypassed signal or other effects.
• געווינען: Controls the intensity of the drive, distortion, or fuzz effect. Higher settings result in more saturation and sustain.
• BASS / GATE:
  • In Overdrive and Distortion modes, this knob functions as a באַס control, allowing you to boost or cut low frequencies.
  • In Fuzz mode, this knob functions as a טויער control, adjusting the noise gate threshold to eliminate unwanted noise and feedback.
• TREBLE / TONE:
  • In Overdrive and Distortion modes, this knob functions as a טרעבל control, allowing you to boost or cut high frequencies.
  • In Fuzz mode, this knob functions as a טאָן control, specifically a Low Pass Filter, for extreme tonal variations and shaping the fuzz character.

TYPE Button:

The small button labeled "TYPE" at the top of the pedal is used to select between the three primary drive modes and to engage the Input Contour Mode.

• מאָדע סעלעקציע: Pressing the TYPE button cycles through the Overdrive (green LED), Distortion (orange LED), and Fuzz (red LED) modes.
• Input Contour Mode: Press and hold the TYPE button to enable or disable the Input Contouring EQ. When active, this mode applies a specific EQ to the input signal for a tighter, more modern character across all drive modes.

בילד: אויבן view of the Pico Triboro Bridge pedal, illustrating the layout of the VOL, GAIN, BASS/GATE, TREBLE/TONE knobs, and the TYPE button.

4. Drive Modes Explained

The Pico Triboro Bridge offers three distinct drive modes, each with its unique sonic characteristics:

• Overdrive Mode (Green LED): This mode provides a gain spectrum ranging from low to mid-level saturation with an open voicing. It is ideal for use as a subtle "always-on" drive, adding warmth and grit, or as a solo boost to push your ampליפער.
• Distortion Mode (Orange LED): Engaging this mode provides additional gain-staging, delivering tones from crunchy rhythms to fully saturated leads. It offers a more aggressive and compressed sound compared to the Overdrive mode.
• Fuzz Mode (Red LED): This mode transforms the pedal into a high-gain fuzz effect with over-the-top saturation. The BASS knob becomes a GATE control, and the TREBLE knob becomes a Low Pass Filter, allowing for unique and extreme tonal variations specific to fuzz.

5. ספּעסאַפאַקיישאַנז

6. וישאַלט

To ensure the longevity and optimal performance of your Pico Triboro Bridge pedal, follow these maintenance guidelines:

• רייניקונג: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• סטאָרידזש: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity when not in use.
• פֿאַרבינדונגען: קאָנטראָלירט פּעריִאָדיש אַלע קאַבל פֿאַרבינדונגען פֿאַר אָפּנוץ און טרער. מאַכט זיכער אַז די דזשעקס זענען פֿרײַ פֿון שטויב און שמוץ.
• מאַכט צושטעלן: Always use the recommended 9V DC center-negative power adapter. Using an incorrect power supply can damage the unit and void the warranty.

7. טראָובלעשאָאָטינג

If you encounter issues with your Pico Triboro Bridge pedal, refer to the following common troubleshooting steps:

• קיין קול:
  • קאָנטראָלירט אַלע קאַבלע קאַנעקשאַנז (אינסטרומענט צו אַרייַנגאַנג, אַרויסגאַנג צו) amp).
  • זיכער מאַכן אַז דער מאַכט אַדאַפּטער איז ריכטיק פארבונדן און אַרבעט.
  • באַשטעטיקן אַז אייער אינסטרומענט און ampליפיער אַרבעט ריכטיק.
  • Check the pedal's bypass status; if it's true bypass, sound should pass even if the pedal is off.
• Weak or Distorted Sound (unexpectedly):
  • Check the GAIN and VOL knob settings.
  • Ensure the correct drive mode (Overdrive, Distortion, Fuzz) is selected for your desired sound.
  • If in Fuzz mode, adjust the GATE and TONE (Low Pass Filter) knobs, as extreme settings can significantly alter the sound.
  • Test with different cables and power supplies to rule out faulty accessories.
• איבערגעטריבענע ראַש/זשומען:
  • Ensure you are using a regulated, isolated power supply.
  • If in Fuzz mode, adjust the GATE knob to reduce unwanted noise.
  • קוק פֿאַר גראַונד לופּס אין דיין סעטאַפּ.
  • רוקט דעם פּעדאַל אַוועק פֿון מאַכט טראַנספֿאָרמערס אָדער אַנדערע קוועלער פֿון עלעקטראָמאַגנעטישע שטערונג.

8. וואָראַנטי און שטיצן

Electro-Harmonix products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official Electro-Harmonix webזייטל אדער קאנטאקט זייער קאסטומער סערוויס דעפארטמענט. האלט אייער קויף קוויטל אלס באווייז פון קויפן פאר גאראנטיע קליימס.

פֿאַר ווייַטער הילף, ביטע באַזוכן: www.ehx.com