1. הקדמה
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Pyhodi Electric Bike Lithium Modification Kit. This kit is designed to convert or upgrade electric bicycles with 36V or 48V systems, supporting 750W to 1000W motors. It includes a 30A 3-mode motor controller, an LCD M5 display panel, and a thumb throttle.
ביטע ליינט דעם מאַנואַל גרינטלעך איידער איר אינסטאַלירט און ניצט עס צו ענשור געהעריק פונקציע און זיכערקייט.
2. זיכערקייַט אינסטרוקציעס
- Always disconnect the battery before performing any installation, maintenance, or repair work on the electric bike system.
- זיכער מאַכן אַז אַלע פֿאַרבינדונגען זענען זיכער און ריכטיק איזאָלירט צו פאַרמייַדן קורץ קרייזן.
- Do not attempt to modify the controller or display unit. Unauthorized modifications can lead to system failure or injury.
- האַלט אַלע עלעקטרישע קאָמפּאָנענטן אַוועק פון וואַסער און נעץ.
- טראָגט פּאַסיקע זיכערהייט-עקוויפּמענט, אַרייַנגערעכנט הענטשקעס און אויג-שוץ, בעת דער אינסטאַלאַציע.
- If you are unsure about any part of the installation process, consult a qualified technician.
3. פּעקל אינהאַלט
באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען פאַראַן אין אייער פּעקל:
- 1 x 30A 3-Mode Motor Controller
- 1 x LCD M5 Display Panel
- 1 x Thumb Throttle
- 1 x Pedal Assist Sensor (PAS)
- וויירינג כאַרנעסעס און קאַנעקטאָרס
Image: All components of the Pyhodi Electric Bike Lithium Modification Kit, including the controller, LCD M5 display, thumb throttle, and pedal assist sensor.
4. ספּעסאַפאַקיישאַנז
| קאָמפּאָנענט | באַשרייַבונג |
|---|---|
| מאָטאָר קאָנטראָללער | 30A, 3 Modes (Sine Wave), 36V/48V Universal, Supports 750W-1000W Motors |
| ווייַז פּאַנעל | LCD M5 Display |
| גערגל | גראָבער פינגער גערגל |
| פּעדאַל אַסיסטאַנס סענסאָר (PAS) | אַרייַנגערעכנט |
| פּונקט וואָג | בעערעך 1.81 פונט (0.82 קג) |
| פּעקל דימענשאַנז | 8.27 X 5.51 X 4.33 אינטשעס (21 X 14 X 11 סענטימעטער) |
5. סעטאַפּ און ייַנמאָנטירונג
Installation of this kit requires basic electrical knowledge and mechanical skills. If you are not confident in your ability to install these components, it is recommended to seek professional assistance.
5.1 General Wiring Overview
The controller acts as the central hub for the electric bike system. It connects to the battery, motor, display, throttle, and PAS sensor. Ensure each connector is matched correctly and securely fastened.
Image: The brushless DC motor controller showing its multiple color-coded wiring harnesses for various connections.
5.2 ינסטאַללאַטיאָן סטעפּס
- שטעלן די קאָנטראָללער: Securely mount the motor controller to the bicycle frame in a location protected from water and physical damage.
- Connect the Motor: Connect the motor phase wires (usually three thick wires) and Hall sensor wires (usually five thin wires) from your motor to the corresponding connectors on the controller. Match colors carefully.
- פאַרבינדן די באַטאַרייע: Connect the battery power cables (red for positive, black for negative) to the main power input on the controller. Ensure correct polarity.
- Install and Connect the Display: Mount the LCD M5 display panel on the handlebars. Connect its wiring harness to the designated display port on the controller.
- Install and Connect the Throttle: Mount the thumb throttle on the handlebars. Connect its wiring harness to the throttle port on the controller.
- Install and Connect the PAS Sensor: Install the pedal assist sensor on the crank arm according to its specific instructions. Connect its wiring harness to the PAS port on the controller.
- Connect Brake Levers (if applicable): If your brake levers have cut-off sensors, connect them to the brake sensor ports on the controller.
- זיכער אַלע קאַנעקשאַנז: Double-check all connections for tightness and proper insulation. Use zip ties or cable wraps to manage wires neatly and prevent snagging.
6. אַפּערייטינג ינסטרוקטיאָנס
6.1 פּאַוערינג אויף / אַוועק
To power on the system, press and hold the power button on the LCD M5 display for a few seconds. To power off, repeat the action.
Image: The LCD M5 display panel, showing the screen and control buttons for operating the electric bike system.
6.2 LCD M5 Display Functions
- גיכקייַט ווייַז: Shows current speed, average speed, and max speed.
- באַטערי מדרגה: ווײַזט אָן די פֿאַרבליבענע באַטאַריע־לאָדונג.
- הילף מדרגה: Displays the current pedal assist level (usually 0-5). Use the '+' and '-' buttons to adjust.
- אָדאָמעטער/רייזע דיסטאַנס: Shows total distance traveled or current trip distance.
- טעות קאָדעס: Displays specific codes if a system fault occurs. Refer to the troubleshooting section.
- סעטטינגס מעניו: Access various parameters like wheel size, speed limit, and battery voltage through the settings menu (refer to the display's specific manual for detailed navigation).
6.3 ניצן די גראָבער פינגער גערגל
The thumb throttle provides on-demand power from the motor, allowing you to accelerate without pedaling. Gently press the lever with your thumb to engage the motor. Release the lever to disengage. Use the throttle responsibly and be aware of your surroundings.
בילד: א נאָענטע בילד view of the thumb throttle, designed for easy control of motor power.
7. וישאַלט
- רעגולער דורכקוק: Periodically check all wiring connections for looseness or damage. Ensure connectors are clean and dry.
- קאָמפּאָנענט רייניקונג: Wipe down the controller, display, and throttle with a soft, damp שטאָף. דו זאלסט נישט נוצן האַרב קעמיקאַלז אָדער אַברייסיוו קלינערז.
- וואַסער שוץ: While components are generally splash-proof, avoid submerging them in water or exposing them to heavy rain for extended periods.
- קאַבלע פאַרוואַלטונג: Ensure all cables are neatly routed and secured to prevent them from getting caught or damaged during riding.
- באַטערי זאָרגן: Although the battery is not part of this kit, proper battery maintenance (charging, storage) is crucial for the overall system's longevity. Refer to your battery's specific manual.
8. טראָובלעשאָאָטינג
If you encounter issues, perform the following basic checks before seeking further assistance:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| סיסטעם טוט נישט מאַכט אויף | Battery not charged, loose battery connection, faulty display connection | Check battery charge, ensure battery is securely connected, verify display cable connection. |
| Motor not responding to throttle/PAS | Loose motor/throttle/PAS connections, brake cut-off engaged, motor/controller fault | Check all motor, throttle, and PAS connections. Ensure brake levers are not engaged. Check for error codes on the display. |
| ווייַז ווייזט טעות קאָד | Specific system fault (e.g., motor Hall sensor error, controller overcurrent) | Consult the M5 display manual for specific error code meanings. Often requires checking the indicated component's connection or replacing a faulty part. |
| Inconsistent power delivery | Loose connections, intermittent sensor fault, low battery voltage | Inspect all connections. Ensure battery is adequately charged. Check PAS sensor for proper alignment and function. |
פֿאַר פּראָבלעמען וואָס ווערן נישט געלעזט דורך די טריט, ביטע קאָנטאַקטירט קונה שטיצע.
9. וואָראַנטי און שטיצן
Pyhodi products are manufactured with quality and reliability in mind. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding replacement parts, please contact Pyhodi customer service through the platform where the product was purchased. Please have your product model and purchase date available when contacting support.