1. הקדמה
This manual provides detailed instructions for the installation and maintenance of the Evotech Performance Frame Crash Protection system, model PRN013992. This product is designed to fit KTM 890 Duke, 890 Duke R, 890 Duke GP, and 790 Duke motorcycles from 2018 onwards. The frame crash protection is engineered to minimize damage to your motorcycle's fairing and other critical components in the event of a fall or slide.
The system consists of high-performance engineering polymer bobbins with an aluminum core, mounted on aircraft-quality aluminum brackets. These components are designed for direct attachment to existing mounting points on your motorcycle, requiring no modifications.
2. זיכערקייַט אינפֿאָרמאַציע
- Always ensure the motorcycle is stable and securely supported before beginning any installation.
- טראָגט פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט, אַרייַנגערעכנט הענטשקעס און אויג-שוץ.
- אויב איר זענט נישט זיכער וועגן קיין שריט פון די ינסטאַלירונג פּראָצעס, באַראַטן זיך מיט אַ קוואַליפֿיצירטן מאָטאָציקל מעכאַניקער.
- Do not overtighten fasteners. Refer to your motorcycle's service manual for specific torque specifications if available, or tighten securely without excessive force.
- האַלטן אַלע קאַמפּאָונאַנץ אויס פון דערגרייכן פון קינדער.
3. פּעקל אינהאַלט
ביטע באַשטעטיקן אַז אַלע די פאלגענדע קאָמפּאָנענטן זענען פאַראַן אין דיין פּעקל:
- 2 x Frame Crash Bobbins (high-performance engineering polymer with aluminum core)
- 2 x Mounting Brackets (aircraft-quality aluminum, powder-coated black)
- Associated Fixings and Spacers (all necessary hardware for installation)
פיגורע 3.1: עקספּלאָדעד view of the crash protection components, highlighting the injection moulded nylon bobbins and anodised aluminium cores.
4. סעטאַפּ און ייַנמאָנטירונג
The Evotech Performance Frame Crash Protection system is designed for straightforward installation using your motorcycle's existing mounting points. No modifications to your motorcycle are required.
- צוגרייטן דעם מאָטאָציקל: Park your KTM motorcycle on a level surface and ensure it is stable, preferably on a paddock stand or center stand. Allow the engine to cool if it has been recently operated.
- אידענטיפיצירן בארג-פונקטן: Locate the designated mounting points on your motorcycle's frame. These are typically existing engine mount bolts or other structural points. Refer to the online fitting instructions provided by Evotech Performance for precise locations specific to your KTM model.
- צוטשעפּען מאַונטינג בראַקאַץ: Secure the powder-coated aluminum mounting brackets to the identified points on the motorcycle frame using the provided fixings. Ensure the brackets are oriented correctly as per the online instructions. Do not fully tighten bolts at this stage.
- Install Crash Bobbins: Attach the high-performance engineering polymer bobbins to the mounting brackets. The bobbins feature an aluminum core for enhanced strength.
- לעצט טייטנינג: Once all components are in place and correctly aligned, progressively tighten all bolts to secure the crash protection system. Ensure all fasteners are snug and secure. Avoid overtightening.
- וויסואַל דורכקוק: After installation, visually inspect all components to ensure they are correctly positioned, securely fastened, and do not interfere with any moving parts or controls of the motorcycle.
פיגורע 4.1: Close-up of the crash protection installed on a KTM motorcycle.
פיגורע 4.2: ברייטער view of the crash protection installed on a KTM motorcycle, showing overall fitment.
5. אָפּעראַציע
The Evotech Performance Frame Crash Protection operates passively, providing protection in the event of a fall or slide. No active operation is required from the user.
It is recommended to periodically check the security of all mounting bolts, especially after the first few rides following installation, and then as part of your regular motorcycle maintenance schedule.
6. וישאַלט
- רעגולער דורכקוק: Periodically inspect the bobbins and mounting brackets for any signs of wear, damage, or looseness.
- רייניקונג: Clean the components with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish or material.
- פאַסטענער טשעק: Ensure all bolts and fasteners remain tight. Re-tighten if necessary, but do not overtighten.
- Post-Incident Check: After any incident involving a fall or slide, thoroughly inspect the crash protection system for damage. Even if visible damage is minimal, the structural integrity may be compromised. It is recommended to replace any components that have sustained impact.
7. טראָובלעשאָאָטינג
- פרייַ קאַמפּאָונאַנץ: If any part of the crash protection feels loose, re-check the tightness of all fasteners. Ensure they are secured according to installation guidelines.
- ינטערפיראַנס: If the installed crash protection interferes with any motorcycle components (e.g., fairing, controls), re-check the installation steps and ensure correct orientation of brackets and bobbins. Refer to online fitting instructions for specific model guidance.
- פעלנדיק טיילן: If any components were missing from the package, contact Evotech Performance customer support immediately.
8. ספּעסאַפאַקיישאַנז
| סאָרט | עוואָטעטש פאָרשטעלונג |
| מאָדעל נומער | PRN013992 |
| קאָמפּאַטיבלע מאָטאָרסיקלעס | KTM 890 Duke, 890 Duke R, 890 Duke GP, 790 Duke (2018 onwards) |
| Material (Bobbins) | High-performance engineering polymer with aluminum core |
| Material (Brackets) | Aircraft-quality aluminum, powder-coated black |
| ייַנמאָנטירונג שטעלע | Front (Frame) |
| אומגעפערע זאך וואָג | 6 פונט (2.7 קג) |
| פּעקל דימענשאַנז | 11 X 9 X 5 אינטשעס (27.9 X 22.9 X 12.7 סענטימעטער) |
9. וואָראַנטי און שטיצן
For warranty information, detailed fitting instructions, or technical support, please refer to the official Evotech Performance website or contact their customer service directly. Online fitting instructions are available and recommended for precise model-specific guidance.
Note: For insurance purposes, packages with contents valued at $250 or above may require a signature upon delivery.