REPTITRIP Reptile Heating Pad with PID Thermostat (Model 8X12"-24W) Instruction Manual

הקדמה

This manual provides instructions for the safe and effective use of your REPTITRIP Reptile Heating Pad with PID Thermostat. This device is designed to provide a controlled heat source for reptile terrariums, helping to maintain a stable and appropriate temperature for your pets. Please read all instructions carefully before installation and operation.

וויכטיק סאַפעטי אינפֿאָרמאַציע

Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.

• This product is intended for household use only, specifically for heating reptile terrariums.
• Do not immerse the heating pad or thermostat controller in water. The heating pad is waterproof (IP67 rated) but not designed for submersion.
• Do not use the heating pad if it is folded or creased. Ensure it lies flat.
• Do not use the heating pad directly on a metal tank, as this can lead to inefficient heating or damage.
• Prolonged application at high temperature settings can cause skin burns to animals. Always monitor the temperature carefully.
• Discontinue use immediately if the heating pad shows any signs of deterioration, such as cracking, blistering, or melting.
• The heating pad features a built-in temperature sensor that will stop heating if the internal temperature reaches 122°F (50°C) to prevent overheating.
• Keep out of reach of children and pets not intended for its use.

פּראָדוקט איבערview

The REPTITRIP Reptile Heating Pad system includes a heating mat and an intelligent PID thermostat controller. It is designed to provide precise and stable temperature control for reptile habitats.

שליסל פֿעיִקייטן:

• PID Intelligent Thermostat: Accurately controls heating temperature for efficiency and stability.
• שנעל באַהיצונג: 24W power heats to 113°F (45°C) in approximately 1 minute.
• הויך טעמפּעראַטור שוץ: Automatically stops heating at 122°F (50°C).
• טעמפּעראַטור דעטעקשאַן: Built-in sensor and external probe for real-time temperature monitoring.
• דוראַבאַל קאַנסטראַקשאַן: 5-layer design including PVC material, lagging, and heating layer.
• וואָטערפּרוף פּלאַן: IP67 rated heating pad (do not immerse).
• קלעפּיק באַקינג: Equipped with 3M adhesive for secure mounting.

סעטאַפּ אינסטרוקציעס

1. קלייַבן אָרט: Select a suitable location for the heating pad, typically on the bottom or side of a glass terrarium. Ensure the surface is clean and dry.
2. Apply Heating Pad: Remove the protective film from the 3M adhesive backing on the heating pad. Carefully press the pad firmly onto the chosen surface of the terrarium. Ensure there are no air bubbles or wrinkles.
3. פּאָזיציע טעמפּעראַטור פּראָבע: Place the external temperature probe inside the terrarium, near the area where the heat is needed most, but away from direct contact with the heating pad to ensure accurate ambient temperature readings. Secure it to prevent movement.
4. פֿאַרבינדן טערמאָסטאַט: Plug the heating pad into the thermostat controller. Then, plug the thermostat controller into a standard electrical outlet.

אַפּערייטינג ינסטראַקשאַנז

The PID thermostat controller allows for precise temperature management. The controllable temperature range is 68°F to 113°F (20°C to 45°C).

קאָנטראָללער פאַנגקשאַנז:

• LCD ווייַז: Shows current time, sensor temperature, set temperature, and power percentage.
• ON/OFF קנעפּל: Press and hold to power the unit on or off.
• SET קנעפּל: Press to enter temperature setting mode.
• '+' קנעפּל: Increases the set temperature or navigates menu options.
• '-' קנעפּל: Decreases the set temperature or navigates menu options.
• OK קנעפּל: קאַנפערמז סאַלעקשאַנז.

באַשטעטיקן די טעמפּעראַטור:

1. דרוק די שטעלן button. The set temperature display will begin to flash.
2. ניצן די + or - קנעפּלעך צו סטרויערן די געבעטן טעמפּעראַטור.
3. דרוק די OK button to confirm your setting. The display will stop flashing.

Switching Between °F and °C:

To switch the temperature display between Fahrenheit (°F) and Celsius (°C), long press the שטעלן קנעפּל און די + קנעפּל סיימאַלטייניאַסלי.

וישאַלט

• רייניקונג: Disconnect the power before cleaning. Wipe the heating pad and controller with a damp שטאָף. דו זאלסט נישט נוצן אַברייסיוו קלינערז אָדער ייַנטונקען אין וואַסער.
• דורכקוק: Regularly inspect the heating pad and power cords for any signs of damage, wear, or deterioration. If any damage is observed, discontinue use and replace the unit.
• סטאָרידזש: When not in use, store the heating pad and controller in a dry, cool place, away from direct sunlight and extreme temperatures.

טראָובלעשאָאָטינג

• No Power/Heating:
  • זיכער מאַכן אַז די מאַכט שנור איז זיכער אַרייַנגעשטעקט אין אַ אַרבעטנדיק עלעקטריש ווענטיל.
  • Check if the thermostat controller is powered on (press and hold the ON/OFF button).
  • Verify that the heating pad is correctly plugged into the thermostat controller.
• אומרעכטע טעמפּעראַטור מעסטונג:
  • Ensure the external temperature probe is properly positioned within the terrarium and not directly touching the heating pad or other heat sources.
  • קוקט איבער פֿאַר יעדע שטערונג אַרום דער פּראָבע וואָס קען אַפֿעקטירן זײַן לייענונג.
• טעמפּעראַטור פלאַקטשויישאַנז:
  • The PID system is designed for stable control, but significant external temperature changes or drafts can affect stability.
  • Ensure the terrarium is adequately insulated and placed in a stable environment.
• Heating Pad Overheating (reaching 122°F/50°C):
  • The built-in protection will temporarily stop heating. This is a safety feature.
  • Check if the set temperature is too high for the environment or if the pad is covered by insulating material that traps excessive heat.

ספּעסאַפאַקיישאַנז

וואָראַנטי און קונה שטיצן

For warranty information, technical assistance, or customer support, please refer to the contact information provided with your purchase or visit the official REPTITRIP webזייטל. האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן.