DAKASON 4FT Vapor Tight LED Light with Motion Sensor Instruction Manual

1. הקדמה

Thank you for choosing the DAKASON 4FT Vapor Tight LED Light with Motion Sensor. This fixture is designed for durability and efficiency in challenging environments. It features adjustable wattage, an IP65 waterproof rating, and integrated motion and daylight sensors for optimized energy consumption.

This manual provides essential information for the safe installation, operation, and maintenance of your LED light fixture. Please read it thoroughly before installation and keep it for future reference.

2. זיכערקייַט אינפֿאָרמאַציע

ווארענונג: ריזיקע פון עלעקטרישן קלאַפּ. אָפּשטעקן די מאַכט איידער אינסטאַלירן אָדער סערוויסינג.
Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
ענשור די צושטעלן וואָלtage is compatible with the fixture's requirements (100-277V AC).
Do not handle live wires. Always use appropriate personal protective equipment.
דו זאלסט נישט מאָדיפֿיצירן דעם פֿיקסטשור און נישט נוצן עס פֿאַר אַנדערע צוועקן ווי זײַן באַשטימטן נוץ.
האַלט ברענענדיקע מאַטעריאַלן אַוועק פון דער לײַזקאַמער בעת אָפּעראַציע.
This fixture is rated IP65 for dust and water jet protection. Ensure all connections are properly sealed during installation to maintain this rating.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן און נישט געשעדיגט איידער איר גייט ווייטער מיט דער אינסטאַלאַציע.

1 x DAKASON 4FT Vapor Tight LED Light Fixture
2 x V-hooks
2 רענטגענ מאָונטינג בראַקאַץ
4 x Plastic Wall Plugs
4 רענטגענ סקרוז
4 רענטגענ גאַסקאַץ

Image showing all included mounting hardware: V-hooks, mounting brackets, plastic wall plugs, screws, and gaskets.

Figure 3.1: Included Mounting Kit and Components

4. ספּעסאַפאַקיישאַנז

סאָרט	DAKASON
מאָדעל נאָמען	געפירט פארע ענג ליכט
מאָדעל נומער	P4-54A-50
גרייס	4 פֿוס (47.2 אינטשעס)
וואָסtage	Adjustable: 40W / 50W / 60W
ברייטנאַס	ביז 6600 לומען (ביי 60 וואט)
עפעקטיווקייַט	110 לומאַנז פּער וואט
Voltage	קסנומקס-קסנומקסוו אַק
קאָליר טעמפּעראַטור	5000 קעלווין (קיל ווייַס)
IP שאַץ	IP65 (Waterproof, Dust-tight)
מאַטעריאַל	Polycarbonate (PC) housing and lens
ספּעציעלע פֿעיִקייטן	Dimmable, Motion Sensor, Photocell (Daylight Sensor), Wattage אַדדזשוסטאַבלע
מאַונטינג טיפּ	Ceiling Mount / Wall Mount (Surface Mount)
סערטיפיקאַטיאָנס	UL ליסטעד
לעבן	50,000 שעה
פּראָדוקט דימענשאַנז	47.2"ל x 3.74"בר x 3.38"ה
פּונקט וואָג	4.74 פונט

5. סעטאַפּ און ייַנמאָנטירונג

Before beginning installation, ensure the power supply is turned off at the circuit breaker. This fixture is designed for surface mounting on ceilings or walls.

5.1. מאַונטינג די פיקסטשער

צוגרייטן די מאַונטינג ייבערפלאַך: Choose a suitable location for the fixture. Mark the drilling points for the mounting brackets using the fixture as a guide.
ינסטאַלירן מאַונטינג בראַקאַץ: Drill pilot holes at the marked locations. Insert the plastic wall plugs (if needed for drywall/masonry) and secure the mounting brackets to the surface using the provided screws. Ensure the brackets are firmly attached.
באַוואָרענען די פיקסטור: Carefully align the fixture with the installed mounting brackets and secure it in place. The fixture can be clipped into the brackets.

Diagram showing the components of the vapor tight light fixture including stainless steel clips, mounting bracket, waterproof cable gland, reliable driver, and PC lens & housing.

Figure 5.1: Fixture Components and Mounting Points

A person installing the DAKASON LED light fixture in a garage, with the mounting brackets and screws visible.

פיגורע 5.2: עקסample of Fixture Installation

5.2. עלעקטריקאַל וויירינג

Ensure power is OFF before wiring. The fixture is designed for 100-277V AC input. Connect the supply wires to the fixture's internal wiring terminals:

פאַרבינדן די לעבן (שוואַרץ) wire from the power supply to the fixture's Live terminal.
פאַרבינדן די נייטראַל (ווייַס) wire from the power supply to the fixture's Neutral terminal.
פאַרבינדן די Ground (Green/Bare Copper) wire from the power supply to the fixture's Ground terminal.

Use the waterproof cable gland to ensure a sealed entry point for the wiring, maintaining the IP65 rating.

Close-up of the LED driver inside the fixture, showing input and output wiring terminals.

Figure 5.3: Internal Wiring and Driver

6. אָפּעראַציע און סעטטינגס

The DAKASON LED Vapor Tight Light features adjustable wattage and intelligent sensor controls. These settings are configured using dip switches located inside the fixture.

6.1. וואָסtagE אַדזשאַסטמאַנט

The fixture allows you to select between three wattage outputs: 40W, 50W, and 60W. This adjusts the light output (lumens) accordingly.

40 וו: בעערעך 4400 לומאַנז
50 וו: בעערעך 5500 לומאַנז
60 וו: בעערעך 6600 לומאַנז

צו סטרויערן די וואַסערtagע, געפינען דעם וואַטtage selection switch inside the fixture and set it to your desired output. Ensure power is disconnected before making adjustments.

Image showing a workshop setting with three different light levels corresponding to 40W, 50W, and 60W, and a close-up of the wattage סעלעקציע באַשטימען.

פיגורע 6.1: וואַטtage Options and Selection

6.2. באַוועגונג סענסאָר סעטטינגס

The integrated motion sensor allows for automatic lighting control based on presence. Settings are configured via dip switches.

Close-up of the dip switch panel for motion sensor settings, showing options for sensitivity, hold time, daylight sensor, stand-by period, stand-by dimming level, and sensor mode.

Figure 6.2: Motion Sensor Dip Switch Panel

Refer to the diagram on the fixture's sensor module for specific dip switch positions. Key settings include:

דעטעקשאַן סענסיטיוויטי: Adjusts how easily the sensor detects motion (e.g., 50% or 100%).
האַלטן צייט: The duration the light stays at 100% brightness after motion is detected and then ceases (e.g., 5s, 90s, 5min, 10min).
סטאַנדביי צייט: The duration the light remains at a dimmed level after the hold time expires and before turning completely off (e.g., 0s, 10s, 15min, +∞ for always on at dim level).
סטאַנדביי דימינג מדרגה: The brightness level during the stand-by period (e.g., 20% or 30%).
סענסאָר מאָדע: Allows enabling or disabling the motion sensor function entirely.

Example of Motion Sensor Logic:

Six-panel diagram illustrating the motion sensor's behavior at a train station: light off with sufficient daylight, dims to 20% with low ambient light, 100% with motion, stays on for hold time, dims to standby, then off when ambient light is high.

Figure 6.3: Motion Sensor Operation Flow

6.3. Daylight Sensor (Photocell)

The daylight sensor (photocell) automatically controls the light based on ambient light levels, saving energy during daylight hours.

Daylight Priority Technology: The sensor will turn on the light fixture when ambient light is below 50 Lux (dusk), even without motion.
When ambient light is above 50 Lux (dawn), the sensor will switch off the light fixture, even if motion is detected.
The daylight sensor function can be disabled via a dip switch if not required.

Image showing a building exterior at dusk and dawn, illustrating how the daylight sensor automatically turns the lights on when ambient light is low and off when it's high.

Figure 6.4: Daylight Sensor Auto On/Off

7. וישאַלט

The DAKASON LED Vapor Tight Light is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.

רייניקונג: אָפּשטעקן די מאַכט איידער איר רייניגט. ווישט די פֿיקסטשור מיט אַ ווייכן, טרוקן שטאָף.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing and lens.
דורכקוק: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the stainless-steel hasps and clips are securely fastened to maintain the vapor-tight seal.
LEDs: The LEDs are maintenance-free and have a lifespan of 50,000 hours. They are not user-replaceable.

8. טראָובלעשאָאָטינג

If you encounter issues with your DAKASON LED Vapor Tight Light, refer to the following common problems and solutions:

פּראָבלעם	מעגלעך סיבה	לייזונג
ליכט טוט נישט קער אויף.	No power supply; incorrect wiring; sensor disabled or misconfigured; ambient light too high.	Check circuit breaker and wiring connections. Verify sensor settings (Daylight Sensor, Sensor Mode). Ensure ambient light is below 50 Lux if Daylight Sensor is enabled.
Light stays on continuously or for too long.	Motion sensor Hold Time or Stand-by Period set too long or to infinite (+∞); constant motion in detection area; sensor malfunction.	Adjust Hold Time and Stand-by Period dip switches. Ensure no continuous motion is triggering the sensor. If issue persists, contact support.
Light turns on/off too frequently or is too sensitive.	Motion sensor sensitivity set too high; environmental factors (e.g., small animals, moving objects, vibrations).	Reduce the Detection Sensitivity setting on the dip switch. Consider the mounting location to minimize false triggers.
ליכט פליכטן.	Incompatible dimmer switch (this fixture is not designed for external dimmers); power supply instability; rare individual sensitivity to LED refresh rates.	Ensure no external dimmer switches are used. Check power supply stability. While most users do not perceive flicker, some individuals may be more sensitive to the inherent refresh rate of LED lighting.
ליכט איז נישט העל גענוג.	וואָסtage setting is too low; Stand-by Dimming Level is active.	סטרויערן די וואַסערtage selection switch to a higher setting (e.g., 60W). Check motion sensor settings to ensure the light is not in a dimmed stand-by state.

9. וואָראַנטי און שטיצן

The DAKASON LED Vapor Tight Light is backed by a 5 יאָר וואָראַנטי, ensuring its quality and performance. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact DAKASON customer support. Provide your purchase details and model number (P4-54A-50) when contacting support to expedite assistance.

You can typically find contact information for the seller or manufacturer through your purchase platform or the DAKASON official webפּלאַץ.

DAKASON P4-54A-50

DAKASON 4FT Vapor Tight LED Light with Motion Sensor