1. הקדמה
This manual provides essential information for the safe and effective operation of your HTVRONT Auto Tumbler Heat Press Machine. Designed for sublimation printing, this machine automatically applies ideal pressure for various drinkware, ensuring efficient and high-quality results. Please read these instructions thoroughly before use.
Image: HTVRONT Auto Tumbler Heat Press Machine, showcasinג זײַן קאָמפּאַקטן דיזײַן און אַרייַנגערעכנטע אַקסעסאָריעס.
2. זיכערקייַט אינפֿאָרמאַציע
- אָטאַמאַטיק פאַרמאַכן: The machine powers down after 15 minutes of inactivity to prevent overheating and conserve energy.
- Emergency Stop: Press the 'R' button to instantly halt heating and release the heat pad, ensuring user safety and preventing burns.
- היץ-קעגנשטעליקע הענטשקעס: Always use the provided heat-resistant gloves when handling hot items or the heat press components.
- ווענטילאַטיאָן: אַרבעטן די מאַשין אין אַ געזונט-ווענאַלייטיד געגנט.
- ייבערפלאַך: Place the heat press on a stable, heat-resistant surface.
- צי ניט אָנרירן הייס סורפאַסעס: Avoid direct contact with the heating element during and immediately after operation.
- Voltage: Ensure the machine is connected to a 120V power outlet.
3. וואָס איז אַרייַנגערעכנט
- Auto Tumbler Heat Press x1
- Heat-resistant Gloves x1 pair
- Heat-resistant Tape x1 roll
- ינסטרוקטיאָן מאַנואַל x1
Image: The complete package contents of the HTVRONT Auto Tumbler Heat Press Machine.
4. ספּעסאַפאַקיישאַנז
| שטריך | ווערט |
|---|---|
| רעקאָממענדעד ניצט | Sublimation printing on drinkware (tumblers, mugs, water bottles, sippy cups) |
| אויבערשטער טעמפּעראַטור רייטינג | 390°F (200°C) |
| Voltage | 120 וואלטס |
| וואָסtage | 600 וואטס |
| פּראָדוקט דימענשאַנז | 12.9"ל x 10.9"ברייט x 6.3"ה (32.7 ס״מ x 27.7 ס״מ x 16 ס״מ) |
| פּונקט וואָג | 10.65 פונט (4.84 קג) |
| Compatible Tumbler Diameter | 2.95 אינטשעס (7.5 ס״מ) ביז 3.18 אינטשעס (8.1 ס״מ) |
| Compatible Tumbler Volume | 280ml - 850ml (11-30oz) |
| מאַטעריאַל | אַבס שאָל |
Image: Visual guide for compatible tumbler dimensions and sizes.
5. סעטאַפּ
- אַנפּאַק: נעמט פֿאָרזיכטיק אַרויס אַלע קאָמפּאָנענטן פֿון דער פּאַקאַדזשינג. האַלט די פּאַקאַדזשינג פֿאַר צוקונפֿטיקע סטאָרידזש אָדער טראַנספּאָרט.
- אָרט: Position the heat press on a flat, stable, and heat-resistant surface in a well-ventilated area.
- מאַכט קשר: Connect the power cord to the machine's inlet and then to a standard 120V, 60Hz electrical outlet.
- ערשט מאַכט אויף: Flip the power switch located at the back of the machine to the 'ON' position. The digital display will illuminate.
6. אַפּערייטינג ינסטרוקטיאָנס
6.1. Preparing Your Item
- Ensure your tumbler's diameter is between 2.95 and 3.18 inches.
- Wrap your sublimation design tightly around the tumbler and secure it with heat-resistant tape.
6.2. Setting Temperature and Time
- Use the 'Mode' button to cycle through preset temperature and time settings, or manually adjust using the '+' and '-' buttons for temperature and time.
- Refer to the Quick Reference Chart below for recommended settings based on material.
6.3. Pressing Cycle
- Once settings are confirmed, carefully slide the prepared tumbler into the heating chamber. The machine will automatically detect the tumbler and apply appropriate pressure.
- Press the 'Enter' button to begin the heating cycle. The machine will automatically heat and press the design.
- The digital display will show the countdown.
6.4. Removing the Tumbler
- Upon completion of the cycle, the machine will automatically release the pressure and open.
- Wearing heat-resistant gloves, carefully remove the hot tumbler from the machine.
- Allow the tumbler to cool completely before removing the sublimation paper and tape.
Image: Control panel showing temperature and time settings.
6.5. Quick Reference Chart
| באַזע מאַטעריאַלס | צייט | טעמפּעראַטור |
|---|---|---|
| ומבאַפלעקט שטאָל טאַמבלער | 130±20 ס | 370°F±10°F |
| סעראַמיק טאַמבלער | 400±20 ס | 385°F±10°F |
| גלאז טומבלער | 300±20 ס | 370°F±10°F |
Note: These are general guidelines. Optimal settings may vary based on specific materials and sublimation paper.
7. וישאַלט
- רייניקונג: Always unplug the machine and allow it to cool completely before cleaning. Wipe the exterior with a soft, damp טוך. ניצט נישט קיין שרײַבנדיקע רייניגער און טונקט נישט אײַן די מאַשין אין וואַסער.
- סטאָרידזש: האַלט די היץ-פּרעסע אין אַ טרוקענער, שטויב-פֿרײַער סביבה ווען זי איז נישט אין באַנוץ.
8. טראָובלעשאָאָטינג
- Uneven Heating/Ghosting: Ensure the sublimation paper is tightly wrapped around the tumbler with no gaps or wrinkles. Verify the tumbler diameter is within the recommended range (2.95-3.18 inches) for optimal pressure application.
- Tumbler Difficult to Remove: This may occur with mugs slightly larger than the recommended diameter. Ensure you are using heat-resistant gloves and carefully extract the item. Avoid forcing the tumbler.
- מאַשין איז נישט פּאַוערינג: Check that the power cord is securely plugged into both the machine and a functioning 120V outlet. Ensure the power switch is in the 'ON' position.
- אַוטאָ-אַוועק שטריך: If the machine powers off unexpectedly, it may be due to 15 minutes of inactivity. Simply turn it back on.
9. וואָראַנטי און שטיצן
HTVRONT is committed to providing excellent customer service. Should any issues arise with your Auto Tumbler Heat Press Machine, please contact HTVRONT customer support for assistance. They will work to provide a solution to ensure your satisfaction.
For support, please refer to the contact information provided in your product packaging or visit the official HTVRONT webפּלאַץ.