BoxWave AccuPoint Active Stylus Pen Instruction Manual

הקדמה

This manual provides instructions for the BoxWave AccuPoint Active Stylus Pen, designed for use with the Newland SP930 and other compatible touchscreen devices. This stylus offers precise input without the need for Bluetooth pairing.

פּעקל אינהאַלט

• AccuPoint Active Stylus Pen
• מיקראָוסב טשאַרדזשינג קאַבלע

סעטאַפּ

טשאַרדזשינג די סטילוס

Before initial use, fully charge the stylus. Connect the included MicroUSB cable to the charging port on the stylus and to any standard USB power source (e.g., computer, wall adapter). The indicator light will show charging status.

Image: The stylus connected to a MicroUSB cable for charging. The indicator light changes color to show charging status: red for charging, green for full charge.

• טשאַרדזשינג ינדיקאַטאָר: רויט ליכט ינדיקייץ טשאַרדזשינג.
• גאָר באפוילן ינדיקאַטאָר: Green light indicates a full charge.
• A full charge provides approximately 12 hours of use.

מאַכט אויף / אַוועק

Press the button on the stylus barrel to turn it on. The indicator light will illuminate blue. Press the button again to turn it off.

Image: The BoxWave AccuPoint Active Stylus with its power indicator light glowing blue, signifying it is active.

אַפּערייטינג ינסטראַקשאַנז

ניצן די סטילוס

The AccuPoint Active Stylus does not require Bluetooth pairing. Simply turn it on and begin using it on your touchscreen device. The stylus emits electronic pulses to interact with the screen, allowing for natural writing and drawing positions.

Image: The stylus being used on a tablet, demonstrating its functionality for tapping, swiping, and writing.

• Ultra Fine Tip: The 2mm tip allows for accurate tapping, swiping, and drawing.
• קיין פּאָרינג: No Bluetooth connection is needed.
• קאַמפּאַטאַבילאַטי: Works with most capacitive touchscreen devices, including the Newland SP930.

וויכטיק נאָטעס

• The AccuPoint Stylus does נישט support Palm Rejection.
• The AccuPoint Stylus does נישט support Pressure Sensitivity.

וישאַלט

רייניקונג

To clean the stylus, gently wipe the barrel with a soft, dry cloth. For the tip, use a slightly damp cloth if necessary, ensuring no moisture enters the stylus body.

סטאָרידזש

Store the stylus in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the stylus is turned off when not in use to conserve battery life.

באַטערי קער

To prolong battery life, avoid fully discharging the stylus frequently. Recharge it when the indicator light suggests low battery.

טראָובלעשאָאָטינג

סטילוס ניט ריספּאַנדינג

• Ensure the stylus is turned on (blue indicator light).
• קאָנטראָלירט די באַטאַרייע מדרגה און לאָדנט אויף אויב נייטיק.
• Ensure the device screen is clean and free of debris.
• Test the stylus on another compatible device to rule out device-specific issues.

טשאַרדזשינג ישוז

• Verify the MicroUSB cable is securely connected to both the stylus and the power source.
• פּרוּווט אַ אַנדערש וסב פּאָרט אָדער מאַכט אַדאַפּטער.
• Ensure the charging port on the stylus is clean and free of obstructions.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

וואָראַנטי אינפֿאָרמאַציע

BoxWave products typically come with a manufacturer's warranty. Please refer to the product packaging or the official BoxWave website for specific warranty terms and conditions. Extended protection plans may also be available for purchase.

קונה שטיצן

For technical assistance, troubleshooting, or product inquiries, please contact BoxWave Corporation customer support. Limited third-party tech support for your device may be available (up to 3 inquiries via messaging).

באַמערקונג: BoxWave is not affiliated with or endorsed by Newland.