CLY 35W LED Outdoor Projector with Motion Detector User Manual

הקדמה

This manual provides comprehensive instructions for the installation, operation, and maintenance of your CLY 35W LED Outdoor Projector with Motion Detector. Please read this manual carefully before installation and retain it for future reference. This product is designed to provide efficient and reliable outdoor illumination with enhanced security features through its integrated motion sensor.

וויכטיק סאַפעטי אינסטרוקציעס

• עלעקטריקאַל זיכערקייַט: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before installation or maintenance.
• Voltage: This product operates at 230 Volts. Verify your power supply matches this requirement.
• מאָונטינג: Mount the projector securely on a stable surface. The recommended installation height is 3 to 5 meters (9.84 to 16.40 feet).
• וואַסער קעגנשטעל: The product is IP66 rated for water and dust resistance. However, avoid submerging the unit in water. Ensure all connections are properly sealed to maintain IP66 rating.
• היץ: The LED projector generates heat during operation. Do not cover the unit or install it in an enclosed space without adequate ventilation.
• ליכט מקור: Do not stare directly into the LED light source when it is illuminated, as it may cause eye strain or damage.
• דיסאַססעמבלי: Do not attempt to disassemble or modify the product. This will void the warranty and may lead to electrical hazards.

פּעקל אינהאַלט

ביטע טשעקט דעם פּעקל צו זיכער מאַכן אַז אַלע קאָמפּאָנענטן זענען פאַראַן און נישט געשעדיגט:

• 1 x CLY 35W LED Outdoor Projector with Motion Detector (Model: FLB035)
• Mounting Screws and Wall Plugs (typically 3 screws and 3 wall plugs)
• באַניצער מאַנואַל (דעם דאָקומענט)

Image: The CLY 35W LED Outdoor Projector, showing the main unit, power cable, motion sensor, and included mounting screws and wall plugs.

פּראָדוקט ספּעסאַפאַקיישאַנז

Image: Technical drawing showing the dimensions of the CLY LED Outdoor Projector: 160mm (6.3in) width, 175mm (6.9in) height, and 35mm (1.4in) depth.

Image: EU Energy Efficiency Label for the CLY LED Projector, model FLB035, indicating an energy efficiency class F and 35 kWh/1000h consumption. More details can be found at eprel.ec.europa.eu/qr/979506.

ינסטאַללאַטיאָן גייד

Follow these steps for proper installation of your CLY LED Outdoor Projector:

1. קלייַבן אַ אָרט: Select a suitable outdoor location, such as a garage wall, garden fence, or patio area. Ensure the mounting surface is solid and can support the weight of the projector. The recommended installation height is between 3 to 5 meters (9.84 to 16.40 feet) for optimal motion detection and light coverage.
2. מאַרקירן דרילינג פונקטן: Use the mounting bracket as a template to mark the positions for drilling holes on the wall.
3. בויער האָלעס: באָרט לעכער אויף די מאַרקירטע פּאָזיציעס. שטעקט אַרײַן די צוגעשטעלטע וואַנט־פּלאַגז אין די געבאָרטע לעכער.
4. אָנקלאַפּן די בראַקאַץ: באַפֿעסטיקן די מאַונטינג קלאַמער צו דער וואַנט מיט די צוגעשטעלטע שרויפֿן.
5. דראָט קאַנעקשאַן: Before connecting, ensure the main power supply is turned OFF at the circuit breaker. Connect the projector's power cable to your electrical wiring. The cable typically includes a Live Wire (red/brown) and a Neutral Wire (blue/black). Ensure connections are secure and properly insulated to maintain the IP66 rating.
6. צוטשעפּען פּראָיעקטאָר: Attach the projector unit to the mounted bracket.
7. סטרויערן אַנגלעס: Adjust the angle of the projector and the motion sensor. The projector's metal bracket is adjustable up to 180 degrees. The motion sensor can be adjusted 180 degrees horizontally and 180 degrees vertically for optimal detection coverage.

Image: Diagram illustrating the ideal mounting height (3-5m), optimum light range (3-4m), and maximum detection range (12m) for the CLY LED Projector. It also shows the 180-degree adjustable sensing angle of the PIR sensor.

בילד: אן איבערקאפ view demonstrating the 120-degree beam angle and 120-180 degree detection angle of the motion sensor, with a detection distance of up to 12 meters. It also shows the recommended installation height of 3-5 meters and a lighting range of 3-4 meters.

Image: Illustration showing the 180-degree vertical and horizontal adjustment capabilities of the projector's mounting bracket, allowing for flexible installation on walls or ceilings.

אַפּערייטינג ינסטראַקשאַנז

The CLY LED Outdoor Projector features an advanced PIR motion sensor with adjustable settings for lighting time and light sensitivity.

באַוועגונג סענסאָר סעטטינגס:

The motion sensor has two adjustable dials:

• Time Setting (L dial): This dial controls how long the light stays on after motion is detected. Available settings are: 10 seconds, 45 seconds, 120 seconds, and 600 seconds.
• Sensitivity Setting (M dial): This dial controls the light sensor's sensitivity to ambient light, determining when the motion sensor becomes active.
  • Moon Symbol (Low Sensitivity): The sensor will only detect motion and activate the light during nighttime or in very low light conditions.
  • Sun Symbol (High Sensitivity): The sensor will detect motion and activate the light throughout the day and night, regardless of ambient light levels.

Image: Close-up of the motion sensor showing the 'L' dial for lighting time settings (10s, 45s, 120s, 600s) and the 'M' dial for sensitivity settings (moon symbol for night-only detection, sun symbol for day and night detection). It also indicates a detection distance of 0-12 meters.

בילד: א דעטאַלירטע view of the motion sensor's two adjustment dials: the 'L' dial for setting the illumination duration and the 'M' dial for adjusting the light sensitivity (day/night operation).

Image: Visual representation of the motion sensor's LUX settings. The 'Moon' symbol indicates that the light will only activate at night, while the 'Sun' symbol indicates activation throughout the day and night. It also shows the lighting time settings (10s, 45s, 120s, 600s).

וישאַלט

To ensure the longevity and optimal performance of your CLY LED Outdoor Projector, follow these simple maintenance guidelines:

• רייניקונג: Periodically clean the surface of the projector and the motion sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or the sensor.
• דורכקוק: Regularly inspect the power cable and connections for any signs of wear, damage, or loose connections. Ensure the waterproof rubber plug on the sensor is securely in place.
• מניעות: Ensure that the motion sensor is not obstructed by dirt, leaves, or other debris, which could affect its detection capabilities.
• קיין באַניצער סערוויסאַבלע פּאַרץ: The LED light source is integrated and not user-replaceable. Do not attempt to open the main housing of the projector.

Image: Depicts the CLY LED Projector's IP66 waterproof rating, showing its resistance to rain, heat, and cold weather conditions, ensuring durability in various outdoor environments.

Image: Shows the back of the CLY LED Projector, highlighting its excellent heat dissipation design with fins. It also indicates the 1-meter cable length and the plastic-clad aluminum construction for insulation and safety.

טראָובלעשאָאָטינג

If you encounter issues with your CLY LED Outdoor Projector, refer to the following common problems and solutions:

וואָראַנטי און קונה שטיצן

CLY provides a 2-year replacement service for this product. If you experience any issues or have questions regarding your CLY 35W LED Outdoor Projector, please do not hesitate to contact our customer support team.

You can reach us via Amazon's messaging service or through the service email address provided in your product packaging. We aim to respond to all inquiries within 24 hours.

For more information about CLY products, you may visit the official CLY brand store on Amazon: CLY Brand Store.