FORGING MOUNT Mobile TV Stand FM6614-JP Instruction Manual

1. וויכטיק סאַפעטי אינפֿאָרמאַציע

Please read this manual thoroughly before assembly and use. Keep this manual for future reference. Incorrect assembly or use may result in product damage, property damage, or personal injury.

• וואָג קאַפּאַציטעט: Do not exceed the maximum load capacity of 50kg (110 lbs) for the TV stand. The top shelf has a capacity of 2.5kg, and the lower shelf has a capacity of 5kg.
• TV Size and VESA Compatibility: This stand is designed for 32-70 inch TVs. Ensure your TV's VESA pattern (mounting hole distance on the back of the TV) is compatible with the stand (max 600x400mm). Common compatible VESA patterns include 100x100, 200x100, 200x200, 300x200, 400x200, 300x300, 400x300, 400x400, and 600x400mm.
• פעסטקייַט: Always ensure the casters are locked when the stand is in a stationary position to prevent accidental movement. Distribute weight evenly on shelves.
• פֿאַרזאַמלונג: Follow all assembly instructions carefully. If you encounter any difficulties or have missing parts, contact customer support immediately. Do not use power tools for assembly unless specified, as overtightening screws can cause damage.
• קינדער: Keep children away from the TV stand during assembly. Do not allow children to climb on or play with the stand or attached TV.

2. פּעקל אינהאַלט

באַשטעטיקט אַז אַלע קאָמפּאָנענטן זענען פאַראַן און נישט געשעדיגט איידער איר הייבט אָן צו פֿאַרזאַמלען. אויב עס פֿעלן אָדער זענען געשעדיגט טיילן, ביטע קאָנטאַקטירט קונה שטיצע.

• ינסטראַקשאַנז מאַנואַל
• Casters (4 units)
• קאַבלע טייז
• Shelves (2 units)
• All necessary hardware (screws, washers, spacers, etc.)
• Main stand components (base, poles, TV mounting bracket)

3. ספּעסאַפאַקיישאַנז

4. אינסטרוקציעס פֿאַר אויפֿשטעלן און פֿאַרזאַמלען

Follow these steps carefully to assemble your FORGING MOUNT Mobile TV Stand.

Step 4.1: Attach Casters to the Base

Secure the four casters to the base of the TV stand. Ensure they are tightened properly for stability.

Description: This image illustrates the caster wheel with its locking mechanism. The blue arrow indicates the direction to press the lever to engage the brake, securing the stand in place.

Step 4.2: Assemble the Dual Poles and Shelves

Attach the dual support poles to the base. Then, install the two media shelves onto the poles. The shelves are height-adjustable and can be removed if not needed.

Description: This image displays the TV stand with its dual poles and two shelves. The top shelf is suitable for a laptop, and the lower shelf can hold smaller media devices like a projector or speaker. Dimensions and load capacities for each shelf are also shown.

Step 4.3: Attach the TV Mounting Bracket

Secure the TV mounting bracket to the dual poles at your desired height. Ensure the bracket is level and securely fastened.

Description: This diagram provides an overview of the TV stand's dimensions and VESA compatibility. It indicates support for 32-70 inch TVs with a maximum load of 50kg and VESA patterns up to 600x400mm.

שריט 4.4: מאָנטירן דעם טעלעוויזיע

Carefully attach your TV to the mounting bracket. Ensure all screws are tightened to secure the TV. Double-check the VESA compatibility and TV weight before mounting.

Description: This image shows the fully assembled FORGING MOUNT mobile TV stand with a television mounted, demonstrating its intended use.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1: Adjusting TV Height

The TV mounting bracket can be adjusted vertically along the dual poles. Loosen the securing bolts on the back of the poles, slide the TV to the desired height (between 1590mm and 1720mm), and then re-tighten the bolts securely. The stand offers 3-stage height adjustment for the metal poles.

Description: This diagram illustrates the height adjustment capability of the TV stand, showing a range from a minimum of 159cm to a maximum of 177cm. It highlights the three adjustable stages on the metal poles.

5.2: Adjusting TV Tilt Angle

The TV mounting bracket allows for a tilt adjustment of up to 15 degrees (up or down). Loosen the tilt adjustment knobs on the side of the bracket, set the desired angle, and then tighten the knobs firmly to secure the TV in position.

5.3: Moving the TV Stand

To move the stand, ensure all caster brakes are disengaged. Gently push the stand to its new location. The 360° rotating casters allow for easy maneuverability.

Description: This image demonstrates the ease of moving the TV stand due to its casters. A person is shown effortlessly pushing the stand, while another image shows a person struggling with a non-mobile stand.

5.4: Locking the Casters

Once the stand is in its desired position, engage the brakes on all four casters by pressing down on the lever located on each wheel. This will prevent the stand from moving accidentally.

באַשרייַבונג: דאָס בילד גיט אַ נאָענטע בילד view of a caster wheel, highlighting the brake lever. The blue arrow indicates the action to engage the lock, ensuring the stand remains stationary.

5.5: Cable Management

Utilize the integrated cable management features on the back of the stand and the provided cable ties to organize and conceal TV and device cables for a tidy appearance.

6. וישאַלט

• רייניקונג: ווישט אָפּ דעם שטאַנד מיט אַ ווייכן, טרוקענעם שטאָף. פֿאַר שווערע פֿלעקן, ניצט אַ ביסלamp cloth can be used, followed by drying. Avoid abrasive cleaners or solvents.
• דורכקוקן: קאָנטראָלירט פּעריִאָדיש אַלע שרויפן און באָלטן צו זיכער מאַכן אַז זיי בלייבן פעסט. פֿעסטשטײַערט ווידער אויב נייטיק.
• קאַסטער קער: Keep casters free of dust and debris to ensure smooth movement.

7. טראָובלעשאָאָטינג

• שטאַנד איז נישט סטאַביל:
  • זיכער מאַכן אַז אַלע פֿאַרזאַמלונג שרויפן זענען גאָר צוגעצויגן.
  • Verify that the TV weight and VESA pattern are within the specified limits.
  • זיכער מאַכן אַז דער שטאַנד איז געשטעלט אויף אַ גלאַטער, גלייכער ייבערפלאַך.
  • Lock all casters when the stand is stationary.
• שוועריקייט צו רירן דעם שטאנד:
  • Check if all caster brakes are disengaged.
  • Clean any debris from the caster wheels.
• טעלעוויזיע איז נישט גלייך:
  • Adjust the tilt mechanism on the TV mounting bracket.
  • Ensure the stand itself is level on the floor.
• Missing parts or incorrect screws:
  • Refer to the package contents list. If parts are missing or incorrect, contact customer support for assistance.

8. וואָראַנטי און שטיצן

FORGING MOUNT products come with a 1-יאָר פאַבריקאַנט ס וואָראַנטי פון די דאַטע פון ​​קויפן.

For any questions, concerns, or issues regarding your product, including missing parts or assembly difficulties, please contact FORGING MOUNT customer support through your Amazon account:

1. גיין צו Account Service.
2. אויסקלייַבן סדר געשיכטע.
3. Find your order for the FORGING MOUNT Mobile TV Stand.
4. דריקט אויף טרעגער.
5. אויסקלייַבן פרעגן אַ קשיא to contact us directly.

Our support team is available to assist you.