MCGOR Under Cabinet Lighting Instruction Manual

הקדמה

Thank you for choosing the MCGOR Under Cabinet Lighting. This 14.7-inch rechargeable motion sensor light is designed to provide convenient and efficient illumination for various indoor spaces such as kitchens, closets, stairs, and hallways. Featuring magnetic installation, dimmable brightness, and a long-lasting rechargeable battery, this light offers a versatile lighting solution.

Image: The MCGOR Under Cabinet Lighting, showing two units and their packaging.

פּראָדוקט פֿעיִקייטן

• באַוועגונג סענסאָר מאָדע: Automatically turns on when motion is detected within 120° and 10ft in dark or low-light environments, and turns off after approximately 20 seconds of no motion.
• Always-on Mode: Allows the light to remain continuously on for extended tasks or as a constant light source.
• דימאַבלע ברייטנאַס: Features 5 levels of brightness adjustment to suit different lighting needs, from bright task lighting to a soft night light.
• USB-C קריקאָנלאָדלעך באַטאַרייע: Built-in 2500mAh rechargeable battery, easily charged via a Type-C cable. Eliminates the need for wiring or frequent battery replacement.
• גרינגע מאַגנעטישע ינסטאַלירונג: Strong built-in magnets allow direct attachment to ironwork surfaces. Adhesive metal plates are included for installation on non-metallic surfaces.

Image: Illustration of the motion and light sensor design, detecting motion up to 10ft within a 120-degree angle and auto-off after 20 seconds.

בילד: דעטאַלירט view of the light's control panel, highlighting the ON, OFF, and AUTO modes, brightness adjustment button, PIR sensor, and USB-C charging port.

Image: Visual representation of the 2500mAh rechargeable battery and USB-C charging, indicating battery life in motion sensor and always-on modes.

Image: Depiction of the two installation methods: direct magnetic attachment to metal surfaces and using adhesive metal plates for other surfaces.

וואָס איז אין די קעסטל

• 2 x Cabinet Lights (14.7 inch)
• 2 x USB-C Charging Cords
• 6 x Adhesive Iron Plates
• 6 רענטגענ סקרוז
• 1 x ינסטרוקטיאָן מאַנואַל

סעטאַפּ און ינסטאַלירונג

The MCGOR Under Cabinet Lights offer two convenient installation methods:

1. דירעקט מאַגנעטיש אַטאַטשמענט: If the desired installation surface is metallic (e.g., a refrigerator, metal shelf), the light can be directly adsorbed onto it using its built-in strong magnets.
2. קלעפּיקע מעטאַל פּלאַטעס: For non-metallic surfaces (e.g., wood cabinets, walls), use the included adhesive metal plates.
   • Clean the surface where you intend to install the light to ensure it is dry and free of dust.
   • Peel off the protective film from one side of an adhesive metal plate.
   • Attach the adhesive side of the metal plate firmly to the desired surface.
   • Align the light with the metal plate and allow its built-in magnets to secure it in place.

The magnetic attachment allows for easy removal of the light for charging or repositioning.

אַפּערייטינג ינסטראַקשאַנז

The light features a multi-function switch and brightness adjustment button.

באַשטימען מאָדעס:

• ON (Always-on Mode): Slide the switch to the "ON" position for continuous illumination. This mode is suitable for tasks requiring constant light.
• OFF (Turn Off): Slide the switch to the "OFF" position to turn the light off completely.
• AUTO (Motion Sensor Mode): Slide the switch to the "AUTO" position. In this mode, the light will automatically turn on when motion is detected in a dark or low-light environment and turn off after approximately 20 seconds of no motion.

אַדזשאַסטינג ברייטנאַס:

The light offers 5 levels of brightness. To adjust the brightness, press the dedicated brightness adjustment button (refer to the control panel image in the Product Features section). Each press will cycle through the available brightness levels.

בילד: עקסamples of the MCGOR light in various applications, including kitchen, hallway, stairs, and bathroom.

וישאַלט

טשאַרדזשינג די באַטאַרייע:

The light is equipped with a built-in 2500mAh rechargeable battery. When the battery is low, the light's performance may diminish. To charge:

1. Carefully detach the light from its installed position (if using magnetic attachment).
2. Connect the included USB-C charging cord to the light's USB-C port.
3. Connect the other end of the USB-C charging cord to a standard USB wall adapter (not included), power bank, or computer USB port.
4. A charging indicator light will illuminate during charging. Once fully charged, the indicator light will change (e.g., from red to green).

A full charge can last up to 7-30 days in Motion Sensor Mode (depending on usage frequency) and approximately 8 hours in Always-on Mode at 100% brightness.

רייניקונג:

Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or immerse the light in water.

טראָובלעשאָאָטינג

• ליכט נישט קערן אויף:
  • זיכער מאַכן אַז די באַטאַרייע איז אויפגעלאָדן. פֿאַרבינדט עס צו אַ מאַכט מקור און קאָנטראָלירט דעם טשאַרדזשינג אינדיקאַטאָר.
  • Verify the switch is in the correct position (ON for continuous, AUTO for motion sensing).
  • In AUTO mode, ensure the environment is dark enough for the sensor to activate.
• Motion sensor not working effectively:
  • Check if the light is in AUTO mode.
  • זיכער מאַכן אַז עס זענען נישטאָ קיין שטערונגען וואָס בלאָקירן דעם PIR סענסאָר.
  • Confirm the ambient light is low enough for the sensor to trigger.
• ליכט פליקערט אדער טונקל:
  • The battery may be low. Recharge the light fully.
  • Check the brightness setting and adjust if necessary.
• Adhesive not holding:
  • זיכער מאַכן אַז די ייבערפלאַך איז ריין און טרוקן איידער אַפּליקאַציע.
  • Apply firm pressure for several seconds when attaching the adhesive metal plate.
  • Allow sufficient time for the adhesive to bond before mounting the light.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

For any questions, concerns, or support regarding your MCGOR Under Cabinet Lighting, please refer to the contact information provided with your purchase or visit the official MCGOR store on Amazon:

Visit the MCGOR Store

Please retain your proof of purchase for any warranty claims. Specific warranty details may vary and are typically outlined in the product packaging or on the manufacturer's webפּלאַץ.