FULODE MIX-8 8-Channel Professional Audio Mixer Sound Board Console Instruction Manual

1. הקדמה

This manual provides detailed instructions for the FULODE MIX-8 8-Channel Professional Audio Mixer Sound Board Console. Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its performance and longevity. The MIX-8 is designed for various audio applications, including live performances, studio recording, and DJ events, offering versatile connectivity and sound processing capabilities.

2. זיכערקייַט אינפֿאָרמאַציע

• עלעקטריקאַל זיכערקייַט: Always connect the power adapter to a grounded outlet. Do not expose the unit to rain or moisture. Do not remove covers; refer servicing to qualified personnel.
• ווענטילאַטיאָן: זיכער מאַכן גענוג ווענטילאַציע אַרום דעם אַפּאַראַט צו פאַרמייַדן איבערהיצונג.
• אָרט: Place the mixer on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.
• רייניקונג: ניצט אַ ווייכע, טרוקענע שטאָף פֿאַר רייניקונג. ניצט נישט קיין פֿליסיקע רייניקונגס־מיטלען אָדער אַעראָזאָלן.
• מאַכט צושטעלן: Use only the specified power supply (AC 90-240V, 50-60Hz).

3. פּעקל אינהאַלט

Upon unboxing your FULODE MIX-8, please verify that all the following items are included:

• FULODE MIX-8 Audio Mixer Console
• מאַכט אַדאַפּטער
• באַניצער מאַנואַל (דעם דאָקומענט)

4. פּראָדוקט איבערview

The FULODE MIX-8 is an 8-channel professional audio mixer equipped with a 99-bit DSP digital processor, USB and Bluetooth connectivity, and 48V phantom power. It features individual 3-band equalization for each channel and a 7-band master equalization for comprehensive sound control.

בילד: פון אויבן אַראָפּ view of the FULODE MIX-8 8-channel audio mixer, displaying all knobs, faders, and input/output ports.

4.1 Front & Rear Panel Layout

Image: Detailed diagram of the FULODE MIX-8 mixer's front and rear panels, labeling all inputs, outputs, controls, and features.

• Input Channels (1-8): Each channel features XLR/TRS combo jacks for microphone (MIC) or line-level (LINE IN) inputs.
• פאַנטאָם מאַכט (+48 וו): Individual phantom power switches for condenser microphones on each channel.
• געווינס אַדזשאַסטמאַנט: Controls input sensitivity for each channel.
• 3-באַנד עק: High, Mid, and Low frequency adjustments for each channel.
• Pan Balance: אַדזשאַסטירט די סטערעאָ פּאָזיציע פֿון דעם קאַנאַל.
• AUX אַדזשאַסטמענט: Controls the amount of signal sent to auxiliary outputs.
• Channel Mute Switch: מאַכט שטיל יחידישע קאַנאַלן.
• Channel Volume Pusher: Fader for individual channel volume control.
• Digital Multi-Effects (DSP FX): Built-in 99 DSP effects with program selection and parameter adjustment.
• 7-באַנד סטערעאָ גראַפֿישער יקוואַלייזער: Master EQ for overall sound shaping.
• יו-עס-בי/עם-פי-3 שפּילער: Digital display for U disk playback, with controls for play/pause, song switching, and mode selection.
• בלועטאָאָטה קאַנעקטיוויטי: Wireless connection for audio input from smart devices.
• הויפּט אַוטפּוץ (L/R): XLR and 6.5mm (1/4") jack outputs for connecting to ampליפערז אָדער פּאַוערד ספּיקערז.
• כעדפאָון רעזולטאַט: פֿאַר מאָניטאָרינג אַודיאָ.
• Power Switch & Interface: Located on the rear panel.

5. סעטאַפּ

5.1 מאַכט קאַנעקשאַן

1. זיכער מאַכן אַז דער מיקסער'ס מאַכט סוויטש איז אין דער אויסגעלאָשן פּאָזיציע.
2. Connect the provided power adapter to the mixer's power interface on the rear panel.
3. Plug the power adapter into a suitable AC 90-240V, 50-60Hz power outlet.
4. קער אויף די מיקסער מיט די מאַכט באַשטימען.

בילד: הינטערשטע view of the FULODE MIX-8 mixer, showing the power input, power switch, and serial number label.

5.2 אַרייַנשרייַב קאַנעקשאַנז

The MIX-8 supports various input types:

• מיקראָפאָן: Connect XLR microphones to the XLR inputs on channels 1-8. For condenser microphones, activate the +48V phantom power switch for the respective channel.
• ליניע-לעוועל דעוויסעס: פֿאַרבינדן אינסטרומענטן (למשל, קלאַוויאַטורן, גיטאַרן מיט פֿאָר-אַפּאַראַטן)amps) or other audio devices using 1/4" TRS or TS cables to the LINE IN inputs.
• וסב פּלייַבאַקק: אַרײַנשטעלן אַ USB פלאַש דרייוו אין דעם USB פּאָרט פֿאַר MP3 ווידערשפּיל.
• בלועטאָאָטה: Pair your smart device via Bluetooth for wireless audio input.

Image: Close-up of the FULODE MIX-8 mixer's input section, showing XLR and 1/4 inch jack connections for microphones and line-level devices, with phantom power indicators.

5.3 רעזולטאַט קאַנעקשאַנז

• הויפּט אַוטפּוץ: Connect the XLR or 6.5mm (1/4") MAIN OUT jacks to your amplifier, powered speakers, or recording interface.
• כעדפאָון רעזולטאַט: פֿאַרבינדט כעדפֿאָונז צום PHONES דזשעק פֿאַר מאָניטאָרינג.

6. אַפּערייטינג ינסטרוקטיאָנס

6.1 קאַנאַל קאָנטראָל

Each input channel (1-8) has dedicated controls:

• געווינען: Adjust this knob to set the input level for the connected device. Aim for a strong signal without clipping (distortion).
• עק (הויך, מיטן, נידעריק): Use these three knobs to adjust the treble, midrange, and bass frequencies of the individual channel.
• AUX: Controls the amount of signal sent to the auxiliary output.
• פקס: Adjusts the amount of signal sent to the internal DSP effects processor.
• פּאַן: Positions the channel's sound in the stereo field (left to right).
• שטיל: Press the MUTE button to silence the channel. The corresponding LED will illuminate when muted.
• קאַנאַל פאַדער: Adjusts the overall volume level of the individual channel.

Image: Close-up of the FULODE MIX-8 mixer's channel controls, showing individual gain, EQ, AUX, FX, PAN knobs, and mute buttons.

6.2 DSP Effects (FX)

The MIX-8 features 99 built-in DSP effects. To select and apply effects:

1. Use the PROGRAM knob to scroll through the 99 available effects, displayed on the digital screen.
2. Press the PROGRAM knob to confirm your selection.
3. Adjust the FX knob on each channel to send the desired amount of signal to the effects processor.
4. Use the dedicated FX return fader to control the overall volume of the applied effects.

Image: Close-up of the FULODE MIX-8 mixer's digital multi-effects section, showing the display, program knob, and FX level controls.

6.3 7-Band Stereo Graphic Equalizer

The master 7-band graphic equalizer allows for fine-tuning the overall output sound:

• Adjust the faders for each frequency band (e.g., 63Hz, 150Hz, 400Hz, 1KHz, 2.5KHz, 6.4KHz, 12KHz) to boost or cut specific frequencies in the main mix.

Image: Close-up of the FULODE MIX-8 mixer's 7-band stereo graphic equalizer, showing the faders for frequency adjustment.

6.4 USB/MP3 שפּיל און רעקאָרדינג

The integrated USB player supports MP3 files and can also function as a sound card for PC recording:

• פּלייבאַק: Insert a USB flash drive. Use the MENU button to navigate, and the Play/Pause/Switch songs buttons for control.
• פּיסי רעקאָרדינג: Connect the mixer to a computer via USB. The mixer will be recognized as an audio interface, allowing you to record the mixed output directly to your computer.

Image: The FULODE MIX-8 mixer connected to a laptop via USB for recording and playback, with a USB drive inserted.

6.5 בלועטוט וויירלעס פֿאַרבינדונג

צו פאַרבינדן אַ בלועטאָאָטה מיטל:

1. Press the MODE button on the USB/MP3 player section until "BT" or "Bluetooth" is displayed.
2. On your smart device, search for "BT-5.0" or a similar device name and pair.
3. Once connected, audio from your device will play through the mixer. Use the mixer's controls to adjust volume and effects.

Image: Bluetooth connectivity with the FULODE MIX-8 mixer, showing a smartphone connected wirelessly.

6.6 מאָניטאָרינג

Use the PHONES output and its dedicated volume control to monitor the main mix through headphones.

7. וישאַלט

• רייניקונג: ווישט רעגולער אויס די אויבערפלאך פונעם מיקסער מיט א ווייכן, טרוקענעם טוך. פארמיידט צו ניצן שרײַבנדיקע רייניגער אדער סאָלווענטן.
• שטויב שוץ: Keep the mixer covered when not in use to prevent dust accumulation, which can affect faders and knobs.
• סטאָרידזש: Store the mixer in a cool, dry place away from extreme temperatures and humidity.
• קאַבלע פאַרוואַלטונג: Ensure all cables are neatly organized and not under tension to prevent damage to ports.

8. טראָובלעשאָאָטינג

• קיין סאָונד רעזולטאַט:
  • קאָנטראָלירט אַלע מאַכט קאַנעקשאַנז און זיכער מאַכן אַז דער מיקסער איז אנגעצינדן.
  • Verify that main output faders and channel faders are raised.
  • Ensure no channels are muted (check MUTE LEDs).
  • Confirm that input devices are properly connected and producing a signal.
  • Check connections to speakers/amplifiers and their power/volume.
• Hum or Hissing Noise:
  • זיכער מאַכן אַז אַלע קייבלס זענען זיכער פארבונדן און נישט געשעדיגט.
  • קוקט איבער גראונד לופּס; פרובירט צו קאנעקטן אלע אודיא עקוויפמענט צו דער זעלבער פאוער סטריפּ.
  • Reduce gain levels on channels and main output if the noise is excessive.
  • Ensure phantom power is only activated for condenser microphones.
• קיין בלועטאָאָטה קאַנעקשאַן:
  • Ensure the mixer is in Bluetooth mode (BT displayed).
  • Check that your smart device's Bluetooth is enabled and within range (approx. 33ft).
  • פּרוּווט אָפּצופּאַרן און ווידער צופּאַרן דעם דעווייס.
• USB ווידערשפּיל פּראָבלעמען:
  • Ensure the USB drive is formatted correctly and contains compatible MP3 files.
  • פּרוּווט אַ אַנדערש וסב פאָר.

9. ספּעסאַפאַקיישאַנז

10. וואָראַנטי און שטיצן

FULODE products are manufactured to high-quality standards. For warranty information, please refer to the specific terms provided at the time of purchase or contact FULODE customer support. In case of any issues or questions regarding your MIX-8 mixer, please contact the FULODE Official Shop directly for assistance.

Note: Any operation error may cause the device to have no sound. Please refer to the troubleshooting section or contact support if issues persist.

11. אפיציעלע פּראָדוקט ווידעאָ